Flow meter for disposable neutral gas cylinder (Argon and Argon +CO²)

In stock

Oxyturbo

Reference: 215310

Flow meter for disposable neutral gas cylinder (Argon and Argon +CO²)

(17 reviews)

€26.33

21,58 € tax excl.

Fast delivery

2-year warranty

Flow meter for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O².

The maximum possible setting with this regulator is 6 liters per minute when fully open

M10 thread
Ridged fitting for hose with inner Ø 6.3 to 7.5 mm

We offer two models

With one gauge to adjust the flow rate precisely
With two gauges to check the fill level of the cylinder and adjust the flow rate precisely

Regulators accepting gas hoses with an inner diameter of 6.5 to 7.3 mm

Combinations	Price	quantity
1	€26.33
2	€42.19

In stock

SOUDO METAL

Reference: MI-MPH5

Large magnetic positioner

(2 reviews)

€35.59

29,17 € tax excl.

Fast delivery

2-year warranty

Large magnetic positioner
Possible angles: 45 - 90 and 135 °
Dimensions: A 116 mm / B: 125 mm
Capacity: 9.2 kg
Lateral pull load capacity: 36 kg
Direct lifting capacity: 9.2 kg

In stock

A.T.I

Reference: 16501

Wooden welding brush with 3 steel rows

€4.06

3,33 € tax excl.

Fast delivery

2-year warranty

Wooden-handled welding brush with 3 rows of steel wire for brushing the weld bead.
Total brush length including handle 290 mm
Handle length 135 mm
Wire length 25 mm

Welding brush with crimped steel wire for brushing steel

In stock

A.T.I

Reference: 16508

Welding brush with crimped steel wire for brushing steel

€13.21

10,83 € tax excl.

Fast delivery

2-year warranty

Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Long handle to keep a safe distance from the heat of the welded part
Total brush length including handle: 370 mm
Effective length: 135 mm

In stock

Gys

Reference: 076341

GYS

€401.59

329,17 € tax excl.

or 4 x 100,40 €

Free delivery

2-year warranty

GYS 2-in-1 cart: welding machine + gas cylinder up to 10 m³ on the same stand
Cart sold bare
Delivered unassembled

Cart for welding machine or TIG + gas cylinder up to 4 m3

In stock

Gys

Reference: 080034

Cart for welding machine or TIG + gas cylinder up to 4 m3

(1 review)

€343.64

281,67 € tax excl.

or 4 x 85,91 €

Free delivery

2-year warranty

GYS 2-in-1 cart: welding machine + gas cylinder up to 4M3 on the same support
Dimensions: H106cm x W50cm x D45cm
Cart sold bare
Delivered unassembled

In stock

Le Lorrain

Reference: 150381

Le Lorrain |female coupler/ 12/100 ISOCOUPLE

€29.49

24,17 € tax excl.

Fast delivery

2-year warranty

Female neutral gas nozzle
Compatible with quick isocouple connectors 150376

This nozzle fits onto the outlet of your fixed-position regulator and allows you to couple your gas hose fitted with connector 150376

2 male gas fittings Ø 5 mm push-in for TIG welder

In stock

Gys

Reference: 045705

2 male gas fittings Ø 5 mm push-in for TIG welder

€11.19

9,17 € tax excl.

Fast delivery

2-year warranty

Argon and Argon +CO² column gas regulator

In stock

Le Lorrain

Reference: 054201

Argon and Argon +CO² column gas regulator

(3 reviews)

€202.31

165,83 € tax excl.

or 3 x 67,44 €

Free delivery

2-year warranty

This column regulator provides very precise gas flow control, ideal for TIG welding of stainless steel and aluminium
Regulator set at 3.5 bar with column (rotameter) from 0 to 30 L

Type C connection thread

French Manufacturing

In stock

Telwin

Reference: 804208

Telwin quick connector

(29 reviews)

€10.16

8,33 € tax excl.

Fast delivery

2-year warranty

Quick connector for easy connection of the hose to the regulator and your welding machine

Compatible with TELWIN welding machines:
Technomig DUAL 150 - 180 -210 -215 -260
Technomig 240 Wave
Electromig 220 - 300 - 400 Synergic
Electromig 450 - 550 Synergic Aqua
Electromig 230- 330 and 430 Wave Aqua
Inverpulse 60.30 - 60.40 Wave Aqua
Superior 400 - 630 CE VRD
Supermig 380
Mastermig220/2 -270/2
Maxima 230 - 270 Synergic
Infinity TIG 225 DC-HF/LIFT VRD
Technology 230 DC HF/LIFT and 222AC/DC HF/LIFT vrd
Superior TIG 251 DC -252 AC/DC - 311 DC - 322 AC/DC - 421 DC - 422 AC/DC

In stock

StrongHandTools

Reference: MFT10

Magnetic positioner for tacking parts

(9 reviews)

€17.79

14,58 € tax excl.

Fast delivery

2-year warranty

The best way to position and tack pieces together
Suitable for different shapes, round, flat or angled metal surfaces.
Features 6 magnets

Supplier stock

StrongHandTools

Reference: MVDF 44

4 Multi-Position Magnetic Positioners

(14 reviews)

€35.59

29,17 € tax excl.

Fast delivery

2-year warranty

Articulated positioner for holding sheet metal, round, flat or square workpieces during welding operations
Each positioner has 4 magnets
Pack of 4 positioners

In stock

SOUDO METAL

Reference: F11805S

Chipping hammer wooden handle

(21 reviews)

€7.61

6,24 € tax excl.

Fast delivery

2-year warranty

Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 295 grams
Steel handle with a total length of 27 cm.

2-Column Regulator Argon and Argon +CO² Gas

In stock

Le Lorrain

Reference: 054202

2-Column Regulator Argon and Argon +CO² Gas

(3 reviews)

€303.99

249,17 € tax excl.

or 4 x 76,00 €

Free delivery

2-year warranty

This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO²

It is manufactured in accordance with standard EN 585/ISO 2503

This regulator can supply two TIG or MIG machines simultaneously or provide parallel inerting of the pipe to be welded

This regulator has an adjustable flow rate from 0 to 30 litres/minute. The column reading allows very precise gas flow measurement
The pressure gauge measures 50 mm and is protected by a rubber cap

Type C connection thread

French manufacture.

Trolley for MIG or TIG welding machine + gas cylinder up to 4 m3 WELD 81

In stock

Gys

Reference: 037489

Trolley for MIG or TIG welding machine + gas cylinder up to 4 m3 WELD 81

(12 reviews)

€299.91

245,83 € tax excl.

or 3 x 99,97 €

Free delivery

2-year warranty

This WELD 810 transport trolley by GYS can accommodate:
The welding machine
Gas cylinders up to 4m³
Remote control accessories
Dimensions: Height 81 cm - Length 70 cm - Width 50 cm
Dimensions of the upper shelf: 35 x 55 cm
Trolley sold bare

In stock

Le Lorrain

Reference: 150375

ISOCOUPLE quick coupler

(11 reviews)

€19.83

16,25 € tax excl.

Fast delivery

2-year warranty

Quick coupling for connecting 2 hoses
Stepped olive allowing connection of hoses with Ø 4 to 6 mm inner diameter

In stock

Le Lorrain

Reference: 150377

ISOCOUPLE female coupler

(9 reviews)

€20.03

16,42 € tax excl.

Fast delivery

2-year warranty

Female coupler
Compatible with isocouple quick-connect fittings 150380-150382-150-388-150376

This fitting allows the assembly of two hoses together when combined with fitting 150376

Male gas fitting Ø 7 mm snap-in for Multi Pearl 200/210 welding machine

In stock

Gys

Reference: 046245

Male gas fitting Ø 7 mm snap-in for Multi Pearl 200/210 welding machine

(8 reviews)

€7.02

5,75 € tax excl.

Fast delivery

2-year warranty

2 TIG welding machine gas connector fittings

In stock

Gys

Reference: 045712

2 TIG welding machine gas connector fittings

(7 reviews)

€11.14

9,13 € tax excl.

Fast delivery

2-year warranty

2 gas fittings for Ø 0.6 mm inner diameter hose
1/4 D thread

In stock

SOUDO METAL

Reference: MIEHSM

Magnetic holder for electrode holder

(27 reviews)

€10.11

8,29 € tax excl.

Fast delivery

2-year warranty

Magnetic holder for electrode holder

In stock

Weldline

Reference: W000335164

Chipping hammer metal handle

(10 reviews)

€7.02

5,75 € tax excl.

Fast delivery

2-year warranty

Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 330 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm) providing a very good grip on the hammer.

In stock

StrongHandTools

Reference: MAV120

Adjustable angular magnetic square

(1 review)

€250.05

204,96 € tax excl.

or 3 x 83,35 €

Free delivery

2-year warranty

Adjustable magnetic square from 30 to 275° Fast and efficient for holding round or flat pieces together. Handle to adjust and lock the desired angle

In stock

StrongHandTools

Reference: MS

Magnetic positioner

(17 reviews)

€22.36

18,33 € tax excl.

Fast delivery

2-year warranty

The quick and easy way to hold parts.
Equipped with a central hole for easier gripping

Several angle options depending on the chosen model:
MS 45: pulling force 30 kg - Dimensions 111x95x19mm - Angles 45 and 90°
MS 60: pulling force 25 kg - Dimensions 111x95x19mm - Angles 60 and 90°
MS346C: pulling force 40 kg - Dimensions 140x111x19mm - Angles 45 - 60 and 90°

Combinations	Price	quantity
MS 45	€22.36
MS 60	€18.81
MSC346C	€19.83

In stock

StrongHandTools

Reference: MST327

2 Magnetic Squares

(23 reviews)

€28.93

23,71 € tax excl.

Fast delivery

2-year warranty

Holds 2 pieces at angles
Practical: positioned on the outside, they leave clear space for tack welding from the inside
Various positioning angles available: 60-90-120°
Dimensions 83 x 95 x 16mm

Double angular magnetic squares with switches

In stock

StrongHandTools

Reference: MS2

Double angular magnetic squares with switches

(2 reviews)

€127.09

104,17 € tax excl.

Free delivery

2-year warranty

The quick and easy way to hold round or flat workpieces
Two on/off switches for independent operation

2 sizes are available:
MS2-80: pulling force 55 kg - Dimensions 152 x 152 x 38 mm.
MS2-90: pulling force 120 kg - Dimensions 197 x 197 x 48 mm

Combinations	Price	quantity
MS2-80	€127.09
MS2-90	€201.30

In stock

StrongHandTools

Reference: MSA

Magnetic positioner with switch

(12 reviews)

€83.36

68,33 € tax excl.

Fast delivery

2-year warranty

Quick and easy for holding parts
Ideal for holding round and square tubes as well as sheet metal plates

2 sizes are available and 3 models:

MSA46-HD: pulling force 40 kg - Dimensions 111 x 95 x 29 mm - Angles 45 and 90°
MSA48-HD: pulling force 75 kg - Dimensions 152 x 130 x 35 mm - Angles 45 and 90°
MSA53-HD: pulling force 65 kg - Dimensions 152 x 130 x 35 mm - Angles 45 - 60 and 90°

Combinations	Price	quantity
MSA46-HD	€43.71
MSA48-HD	€83.36
MSA53-HD	€80.31

Flow meter for MIG-MAG semi-automatic welding torch

In stock

Oxyturbo

Reference: 260090

Flow meter for MIG-MAG semi-automatic welding torch

(22 reviews)

€20.23

16,58 € tax excl.

Fast delivery

2-year warranty

This flow meter allows you to measure the actual gas flow rate at the nozzle of your welding machine.
It is a tool that helps you save gas while achieving the correct settings.

Regulator with flowmeter and column for refillable cylinder

In stock

Oxyturbo

Reference: 245400

Regulator with flowmeter and column for refillable cylinder

(8 reviews)

€90.49

74,17 € tax excl.

Fast delivery

2-year warranty

This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO².

They comply with and are designed according to standard EN 585/ISO 2503

Pressure gauge size: Ø 70 mm.

This regulator has an adjustable flow rate from 0 to 30 liters / minute
Regulator tested up to 300 Bar

Type C connection thread

Made in Italy

It allows you to adjust the gas flow rate (and therefore save money) more precisely than an adjustment using a dial flowmeter

Mini Dual-Gauge Regulator for refillable cylinder

In stock

Oxyturbo

Reference: 255200.01

Mini Dual-Gauge Regulator for refillable cylinder

(51 reviews)

€50.33

41,25 € tax excl.

Fast delivery

2-year warranty

This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO²
They comply with and are designed according to standard EN 585/ISO 2503
Gauge dimensions: Ø 50 mm
This regulator has an adjustable flow rate from 0 to 30 litres / minute
Regulator tested up to 300 Bar
Type C connection thread
Made in Italy
The quick isocoupler fittings sold on our website are not compatible with this regulator

Welding brush stainless steel wire for brushing stainless steel and non-ferrous metals

In stock

A.T.I

Reference: 16504

Welding brush stainless steel wire for brushing stainless steel and non-ferrous metals

(17 reviews)

€10.13

8,30 € tax excl.

Fast delivery

2-year warranty

Welding brush with plastic handle comprising 30 mm wavy stainless steel wires for brushing the weld bead to remove slag.
This brush allows non-aggressive cleaning of steel, stainless steel, or non-ferrous metals.
Total brush length including handle: 245 mm
Usable length: 135 mm

In stock

Le Lorrain

Reference: 150376

Male / Male ISOCOUPLE coupler

(11 reviews)

€6.97

5,71 € tax excl.

Fast delivery

2-year warranty

Male / Male Coupler
Compatible with isocouple quick-release fittings 150380-150382-150-388

Welding brush wooden handle with 4 rows of straight stainless steel wires

Klingspor

Reference: 358370

Welding brush wooden handle with 4 rows of straight stainless steel wires

(6 reviews)

€9.66

7,92 € tax excl.

Fast delivery

2-year warranty

Welding brush with wooden handle comprising 4 rows of straight stainless steel wires for brushing welds to produce a clean bead by removing slag.
Total brush length including handle 290 mm
Usable length 125 mm

In stock

Le Lorrain

Reference: 516025

Gas fitting for Ø 0.6 mm inner hose

(8 reviews)

€9.10

7,46 € tax excl.

Fast delivery

2-year warranty

Gas fitting for Ø 0.6 mm inner hose
Thread 12 x 100 straight

Double junction for hose Ø inner diameter 6.3 mm

In stock

Le Lorrain

Reference: 516003

Double junction for hose Ø inner diameter 6.3 mm

(2 reviews)

€4.27

3,50 € tax excl.

Fast delivery

2-year warranty

Double junction for hose with Ø inner diameter 6.3 mm

In stock

Le Lorrain

Reference: 514004

2 ear clamps for hose outer Ø 11/13 mm

(15 reviews)

€2.44

2,00 € tax excl.

Fast delivery

2-year warranty

2 ear clamps Ø 11/13 mm for hose with Ø internal 6.3 mm

In stock

Le Lorrain

Reference: 510135

Argon Gas Welding Hose sold per metre

(32 reviews)

€3.45

2,83 € tax excl.

Fast delivery

2-year warranty

Welding hose for neutral gas: Argon and Argon mixed with Co²
Material: rubber + knitted reinforcement
Resistance: 20 Bar
Inner diameter 6.3 mm
This hose meets the EN559 standard
There is no expiry date on this type of gas hose; its replacement depends on its condition

Sold per linear metre
Maximum length 40 m

In stock

A.T.I

Reference: 16500

Welding Brush with Crimped Steel Wire for Brushing Steel

(32 reviews)

€4.01

3,29 € tax excl.

Fast delivery

2-year warranty

Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Total brush length including handle 245 mm
Useful length 135 mm

Large-size MIG or TIG welding machine trolley EUROPA

In stock

Telwin

Reference: 803073

Large-size MIG or TIG welding machine trolley EUROPA

(3 reviews)

€263.31

215,83 € tax excl.

or 3 x 87,77 €

Free delivery

2-year warranty

This trolley is the ideal way to move your welding machine.

This is a 2-in-1 trolley: welding machine + gas cylinder on the same support.
Welding machine up to 65 cm in height.
Gas cylinder up to 4 m³
Assembled dimensions: 940 x 480 x H 1180 mm

The cylinder and the welding machine are secured to the trolley with straps (included).

Trolley sold without equipment.
The stated price does not include the gas cylinder or the welding machine.
Delivered unassembled.

In stock

Soudexpert

Reference: 486

Disposable PURE ARGON gas cylinder

(150 reviews)

€29.49

24,17 € tax excl.

Fast delivery

2-year warranty

Disposable PURE Argon gas cylinder for aluminium welding in MIG-MAG mode or for welding all metals in TIG mode.

M10 Valve thread.

Capacity: 2.2 L Pressure 110 Bar: i.e. 220 Litres of welding gas

Gas supply adapter kit for disposable cylinder

In stock

Telwin

Reference: 990702

Gas supply adapter kit for disposable cylinder

(117 reviews)

€13.73

11,25 € tax excl.

Fast delivery

2-year warranty

This kit allows you to connect your Mig or Tig machine and your gas cylinder to your regulator for disposable cylinders.
It fits onto the rubber hose connected to the gas outlet fitting of your welding machine, and the other end of this small-diameter hose connects directly to the quick connector on the regulator for disposable cylinders.
Outer diameter of hose: 4 mm
Length 65 cm

In stock

Sacit

Reference: CAV000081

2-row brush + welding hammer SACIT

(5 reviews)

€4.94

4,05 € tax excl.

Fast delivery

2-year warranty

Reversible hammer-brush, combining a hammer and a brush for chipping and brushing slag from the weld bead.
Practical 2-in-1 tool for post-weld cleaning.
Carefully sized handle to keep the user away from the hot zone.
Dimensions:
Total length (brush + handle): 290 mm (brush + handle length)
Handle length: 145 mm
Wire length: 25 mm

Flow regulator for disposable neutral gas cylinder (Argon and Argon +CO²)

In stock

Oxyturbo

Reference: OXY215

Flow regulator for disposable neutral gas cylinder (Argon and Argon +CO²)

(257 reviews)

€40.57

33,25 € tax excl.

Fast delivery

2-year warranty

Flow regulator for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O²
The maximum flow rate possible with this regulator is 6 litres per minute when fully open
M10 thread
Quick connector for Ø 4 mm outer diameter hose
Depending on the model and brand of your welding machine, the connection kit reference 990702 may be required to connect this regulator to your welder

3 models are available:
Without gauge
With one gauge to adjust the flow rate precisely
With two gauges to check the cylinder fill level and adjust the flow rate precisely

Regulators accepting gas hoses with 4 mm inner diameter

Combinations	Price	quantity
0	€19.22
1	€26.33
2	€40.57

In stock

Le Lorrain

Reference: 150380

ISOCOUPLE quick connector

(34 reviews)

€27.94

22,90 € tax excl.

Fast delivery

2-year warranty

Quick connector for easy connection between the regulator and your welding machine
Gas hose connection: stepped olive fitting for hose Ø 4 to 6 mm
Regulator inlet: swivel nut 12 x 100 D

Trolley for MIG or TIG welding machine ARCTIC

Supplier stock

Telwin

Reference: 803059

Trolley for MIG or TIG welding machine ARCTIC

(2 reviews)

€299.91

245,83 € tax excl.

or 3 x 99,97 €

Free delivery

2-year warranty

This trolley is the ideal way to move your welding machine.
It is a 2-in-1 trolley: welding machine + gas cylinder on the same support.
Welding machine up to 55 cm in height
Assembled dimensions: 560 X 480 X H 1100 mm
Gas cylinder maximum 4 m3.
The cylinder and the welding machine are secured to the trolley with straps (included).
Trolley sold unequipped.
The price shown does not include the gas cylinder or the welding machine.
Delivered unassembled.

In stock

Le Lorrain

Reference: 054200

DDI Regulator

(16 reviews)

€161.65

132,50 € tax excl.

or 3 x 53,88 €

Free delivery

2-year warranty

The DDI regulator is a new generation regulator for rechargeable gas cylinders — compact, extremely sturdy and easy to use
This regulator is designed for use with neutral welding gases such as pure Argon or Argon + CO²
It offers many advantages:
It corrects overpressure issues related to the use of gas welding equipment
It is very easy to use: the recommended welding pressures are pre-set
The pre-set working pressure allows for gas savings
The high-pressure gauge is protected by a PA casing
Type C connection thread
Made in France

In stock

SOUDO METAL

Reference: MI-MPH25

Small magnetic positioner

(82 reviews)

€12.20

10,00 € tax excl.

Fast delivery

2-year warranty

Small magnetic positioner.
Possible angles: 45 - 90 and 135°.
Dimensions: A: 57 mm and B: 62 mm.
Capacity: 2 kg.

In stock

SOUDO METAL

Reference: MI-MPH35

Medium magnetic positioner

(92 reviews)

€16.26

13,33 € tax excl.

Fast delivery

2-year warranty

Large magnetic positioner.
Available angles: 45 - 90 and 135°
Dimensions A: 92 mm and B: 93 mm
Capacity: 9.2 kg

In stock

Telwin

Reference: 802067

Gas hose length 2 m + fittings

(66 reviews)

€13.18

10,80 € tax excl.

Fast delivery

2-year warranty

Gas hose length 2 m + 2 hose clamps + 1 diameter reducer fitting.
This gas hose connects the regulator for refillable cylinders to your MIG or TIG welding machine.
The fitting (shown in the photo) allows the connection between this gas hose for refillable cylinders and a Ø 4 mm hose for disposable cylinders.

Set chipping hammer + 3-row steel welding brush

Save 10%

In stock

Trafimet

Reference: lot 010341

Set chipping hammer + 3-row steel welding brush

(32 reviews)

€11.35

€12.61

9,31 € tax excl.

Fast delivery

2-year warranty

Chipping hammer for removing welding slag when using coated electrodes (rutile, basic...) or gasless welding wire.
Weight 273 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
Wire brush with wooden handle for brushing the weld to achieve a clean bead.
Total brush length including handle 29 cm
Handle length 13.5 cm

Save 20%

In stock

Sacit

Reference: F11808S

Chipping Hammer

(35 reviews)

€6.80

€8.50

5,58 € tax excl.

Fast delivery

2-year warranty

Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 273 Grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).

Supplier stock

Telwin

Reference: 802666

TELWIN - Gouging / Arc Gouging Kit

€253.15

207,50 € tax excl.

or 3 x 84,38 €

Free delivery

2-year warranty

This kit includes: 802666 / T04050 / T04058. It is compatible with the Superior 400 welding machine models from TELWIN.

$1 Lug TEX-2 35 M2 - Diam 14mm$

In stock

Sacit

Reference: F11533

1 Lug TEX-2 35 M2 - Diam 14mm

(3 reviews)

€3.38

2,77 € tax excl.

Fast delivery

2-year warranty

1 nickel-plated brass lug, clamped by 2 hexagonal head screws This lug provides an excellent electrical connection and very good tensile strength For cables up to 35 mm² Main dimensions: A: 7 mm B: 23 mm V: 14 mm L: 49 mm

Supplier stock

Kemppi

Reference: 6185409

Kemppi remote control R10 5M

€402.60

330,00 € tax excl.

or 4 x 100,65 €

Free delivery

2-year warranty

Remote control 1 potentiometer 5 m

In stock

Sacit

Reference: CX0530

female socket for tx25

(3 reviews)

€3.11

2,55 € tax excl.

Fast delivery

2-year warranty

Female socket for Ø 9 mm connector
Cable 10 -16 and 25 mm²
200A @ 60%

$5 TEX-P Tinned Copper Lugs$

Supplier stock

Sacit

Reference: F11505

5 TEX-P Tinned Copper Lugs

(2 reviews)

€3.87

3,17 € tax excl.

Fast delivery

2-year warranty

5 tinned copper crimp lugs for cable from 10 to 25 mm²
This lug provides an excellent electrical connection and very good tensile strength.
Main dimensions:
A: 7 mm
B: 15 mm
V: 8.4 mm
L: 36 mm
S: 1 mm

In stock

SILICONI

Reference: SBLOCCANTE

SILICONI | SBLOCCANTE PK Releasing Agent - Lubricant

€6.05

4,96 € tax excl.

Fast delivery

2-year warranty

PK is the ultimate versatile unlocking lubricant spray that Siliconi Spa takes pride in as part of its extensive range of high-quality technical aerosols for industry.

The PK multipurpose spray is ideal for releasing, lubricating, cleaning and de-oxidising bolts, gears, work tools, delicate mechanisms, electrical components, seals and industrial machinery from dirt, rust and oxidation.

PK performs seven simultaneous actions:

Action of unlocking nuts, screws, bolts, and components seized by rust;
Lubricating action for moving mechanisms, electronic parts, automotive components, bicycles, work and household tools;
Anti-rust protective action on metal surfaces, through the creation of a thin film that protects the treated surface from corrosion caused by atmospheric agents and salt for a long time;
De-oxidising action on electrical contacts: reactivates oxidised contacts and eliminates electrical dispersion;
Water-repellent action: removes water and moisture from every treated surface;
Anti-freeze action: allows resistance to sub-zero temperatures;
Cleaning and degreasing action: removes grease, oil and deposits from metal surfaces.

Among its many properties, the PK multipurpose spray is particularly suited to surfaces in marine environments, does not attack rubber or plastic, and contains no silicone.

The product is available in both the standard version and with the SMART dispenser button, which allows targeted dispensing, thanks to the practical tube mounted on the dispenser button, which increases spray precision on the least accessible parts and enhances the product's action. The great ease of application of the PK spray is characterised by the ability to dispense the product in any position in which the aerosol can is placed.

The PK multipurpose spray is a green product, as it contains renewable raw materials and the production process used to create it uses 80% renewable energy.

In stock

SILICONI

Reference: CLINOX GREEN

SILICONI | CLINOX GREEN - Stainless steel cleaner

€10.11

8,29 € tax excl.

Fast delivery

2-year warranty

CLINOX Green is a cleaner for stainless steel and chrome surfaces.
CLINOX Green is an innovative product as it contains biodegradable detergents free of hexane and chlorinated compounds, with high detergent power. Furthermore, its formula is highly concentrated in active ingredients, with a reduced propellant content.
It removes rings, grease, oils, and dirt, and leaves a protective film that reduces future scratches and protects machines from stains, dust, marks, and corrosion.
It does not scratch or stain. It contains no substances that could damage, stain, or harm treated surfaces.
CLINOX Green cleans stainless steel surfaces on industrial equipment, kitchens, refrigerators, doors, countertops. Biodegradable. Eco-compatible

500 ml aerosol

DIRECTIONS FOR USE
Shake the dispenser before use.
Spray the product onto a dry cloth and clean the surfaces

SPECIFICATIONS
Base: Biodegradable cleaner
Propellant: Mixture of denatured, odorless and non-toxic propellants
Appearance: White liquid
pH: 6 - 8
Keep away from heat sources and out of direct sunlight.
Store in a dry place at temperatures between +5°C and +35°C.
Shelf life: 12 months

In stock

SILICONI

Reference: SUPER BALL

SILICONI | SUPER BALL - Gas leak detector

€5.04

4,13 € tax excl.

Fast delivery

2-year warranty

SUPER BALL is the best method for finding a gas leak on pressurized parts. Bubbles appear at the location of the leak. It can be used on all gases, even at low pressure (nitrogen, carbon dioxide, refrigeration systems).
Thanks to its formulation with specially selected components, it reveals micro-leaks on low surface tension surfaces

500 ml aerosol

INSTRUCTIONS FOR USE
Shake the aerosol well before use.
Spray the product from a distance of 10 cm;
For professional use only

CHARACTERISTICS
Base: Mixture of foaming components
Propellant: Denatured and odorless hydrocarbon
Appearance: White foamy liquid
Application temperature: -10°C to +130°C (approximately)
Biodegradability: Greater than 80%
Odor: None
CFC-FREE, non-toxic

In stock

GEKA

Reference: 6100T240L1000E5CC

TIG Filler Metal CuAl8 - Ø 2.4 mm

€251.11

205,83 € tax excl.

or 3 x 83,70 €

Free delivery

2-year warranty

TIG filler metal CuAl8 Ø 2.4 mm
5 kg case
Standard AWS A5.7ER CuAl-A1
Standard ISO 24373 s Cu 6100

This filler metal is an alternative to the Castolin Casto tig1185 MF reference.

In stock

ESAB

Reference: 0367556004

ESAB | 1 drive roll for aluminum wire Ø 1/1.2 mm

€36.06

29,56 € tax excl.

Fast delivery

2-year warranty

1 reversible drive roll for aluminum wire, section 1 and 1.2 mm, compatible with the ESAB welder references listed below.

ROGUE EM180
ROGUE EMP 210PRO
REBEL EMP205ic AC/DC
REBEL EMP 215c

In stock

ESAB

Reference: 0349312497

0349312497

€23.85

19,55 € tax excl.

Fast delivery

2-year warranty

1 feed roller for flux-cored wire (gasless) with diameter 0.9 to 1.2 mm, compatible with the ESAB welder references listed below.

ROGUE EM180
ROGUE EMP 210PRO
REBEL EMP205ic AC/DC
REBEL EMP 215c

In stock

ESAB

Reference: 036755

ESAB | 1 roller for stainless steel or steel wire

(2 reviews)

€36.06

29,56 € tax excl.

Fast delivery

2-year warranty

We offer 3 wire feed rollers for steel or stainless steel wire, compatible with the ESAB welder models listed below.

ROGUE EM180
ROGUE EMP 210PRO
REBEL EMP205ic AC/DC
REBEL EMP 215c

Combinations	Price	quantity
0.6 / 0.8 mm	€23.36
0.8 / 1 mm	€23.36
1 - 1.2 mm	€36.06

TIG filler rods Ni055 - cast iron welding - case 0.5 kg

In stock

GEKA

Reference: Ni055

TIG filler rods Ni055 - cast iron welding - case 0.5 kg

(1 review)

€57.95

47,50 € tax excl.

Fast delivery

2-year warranty

TIG cast iron filler rods - Ni055
Diameter: 1.6 to 2 mm
Rod length: 1 metre
Case of 0.5 kg
Requires welding gas (Argon)

For welding:
- Assembly and hardfacing of spheroidal graphite or highly stressed cast iron
- Heterogeneous assembly of nodular cast iron/steel or cast iron/steel

Combinations	Price	quantity
1.6 mm	€70.15
2 mm	€57.95
2.4 mm	€52.86

In stock

ESAB

Reference: 0700300869

ESAB - TIG Torch ET17V length 4 m

(2 reviews)

€269.41

220,83 € tax excl.

or 3 x 89,80 €

Free delivery

2-year warranty

TIG torch with valve type 17, length 4 m
This torch is suitable for the REBEL 215 C welding machine

Duty cycle: 135 A@35%
Recommended gas flow: 5 to 10 L/minute
Shielding gas: AR or AR/He

Supplied with:
A ceramic nozzle GR 5 - Ø 8MM
A gold cerium electrode Ø 2.4 mm
An electrode holder and diffuser 2.4/3.2 mm

In stock

Telwin

Reference: 804362

TELWIN - TIG welding kit 804362

€298.90

245,00 € tax excl.

or 3 x 99,63 €

Free delivery

2-year warranty

This kit includes:

1 TIG torch ST 17 length 4 m.
1 regulator with 2 gauges for refillable cylinder.
1 earth clamp + 25 mm² cable length 3 m
1 gas hose length 2 m

This kit is intended by the manufacturer for the following TELWIN brand TIG welding machine models:
Technology TIG 182

In stock

Telwin

Reference: 802788

TELWIN - TIG Welding Kit 802788

€303.99

249,17 € tax excl.

or 4 x 76,00 €

Free delivery

2-year warranty

This kit includes:

1 TIG ST 26 torch length 4 m.
1 regulator with 2 gauges for refillable cylinder.
1 earth clamp + 25 mm² cable length 3 m
1 gas hose length 2 m

This kit is intended by the manufacturer for the following TELWIN brand TIG welding machine models:

Technology TIG 222 and 230
Superior TIG 251-252-311-322-421-422

Supplier stock

BINZEL

Reference: 317.0220

BINZEL |TIG Lamella Torch SRL 17 PREMIUM

€293.81

240,83 € tax excl.

or 3 x 97,94 €

Free delivery

2-year warranty

Binzel SRL 17 PREMIUM torch length 8 m
Very compact model.

Capacity:
Duty cycle at 60%: 140 A DC and 125 A AC
For use with tungsten electrodes of 0.5 to 2.4 mm diameter

Leather protection on the front part of the cable assembly
Extra flexible quality hoses
Air torches with single cable (gas + current)
Rear reinforcement for effective protection and retention of the cable assembly on the machine side

Supplier stock

Telwin

Reference: 802790

TELWIN - G.R.A. 4500 Cooling Unit for TIG Welder

(1 review)

€808.25

662,50 € tax excl.

or 4 x 202,06 €

Free delivery

2-year warranty

This cooling unit is suitable for TELWIN TIG welding machines whose references are listed below

Technology Tig 222
Superior Tig 252 and 311

Delivered with clamping kit reference 981648

Supplier stock

BINZEL

Reference: 317.0218

BINZEL |Lamella TIG torch SRL 9 PREMIUM

€219.60

180,00 € tax excl.

or 3 x 73,20 €

Free delivery

2-year warranty

Binzel SRL 9 PREMIUM TIG torch length 8 m
Very compact design model.

Capacity:
Duty cycle at 60%: 110 A DC and 95 A AC
For use with tungsten electrodes from 0.5 to 1.6 mm in diameter

Leather protection on the front part of the cable assembly
Extra flexible high-quality hoses
Air-cooled torches with single cable (gas + current)
Rear reinforcement for effective protection and support of the cable assembly on the welder side

In stock

Telwin

Reference: Clear-Cup.L

TELWIN | 1 Clear-cup long glass nozzle

(1 review)

€26.33

21,58 € tax excl.

Fast delivery

2-year warranty

This transparent nozzle is compatible with TIG torches type 17-18 and 26 2 electrode holder diameters available: 1.6 or 2.4 mm Tungsten electrode not included

Combinations	Price	quantity
2.4 mm	€26.33
1.6 mm	€26.33

In stock

Telwin

Reference: Clear-Cup

TELWIN | 1 Clear-cup glass nozzle

(1 review)

€22.97

18,83 € tax excl.

Fast delivery

2-year warranty

This transparent nozzle is compatible with TIG torches of type 17-18 and 26
2 electrode holder diameters are available: 1.6 or 2.4 mm
Tungsten electrode not included

Combinations	Price	quantity
2.4 mm	€23.28
1.6 mm	€22.97

In stock

Telwin

Reference: Crystal

TELWIN | 1 Crystal champagne glass nozzle

(1 review)

€27.40

22,46 € tax excl.

Fast delivery

2-year warranty

This transparent nozzle is compatible with TIG torches of type 17-18 and 26
2 electrode holder diameters available: 1.6 or 2.4 mm
Tungsten electrode not included

Combinations	Price	quantity
2.4 mm	€27.40
1.6 mm	€27.40

In stock

Telwin

Reference: 802976

Telwin - Coolant Liquid for MIG or TIG Torch

€76.25

62,50 € tax excl.

Fast delivery

2-year warranty

Coolant liquid for MIG-MAG or TIG torch cooling system 5L container

LINCOLN - Remote control pedal k870 for TIG welder

Supplier stock

Lincoln Electric

Reference: K870

LINCOLN - Remote control pedal k870 for TIG welder

€526.64

431,67 € tax excl.

or 4 x 131,66 €

Free delivery

2-year warranty

Essential when the welding machine cannot be placed directly next to the welder, remote controls improve work efficiency and reduce welder fatigue.
Supplied with a 7.6 m cable.

Compatible with the following Lincoln machines:
Invertec 175 TP - 220TPX
Invertec V27 -TP
Inverter 275S
Invertec 300 TPX - 400 TPX
Aspect 200 - aspect 300

TIG filler metal rods CuSn12 case 0.5 kg - bronze welding

Supplier stock

GEKA

Reference: TIG - CUsn12

TIG filler metal rods CuSn12 case 0.5 kg - bronze welding

€58.56

48,00 € tax excl.

Fast delivery

2-year warranty

TIG filler metal rods CuSn12 - ER5410
Diameter: 1.6 mm
Rod length: 1 metre
Sleeve of 0.5 kg
Requires use of welding gas (Argon)

Ideal for welding deoxidized copper and copper alloys, copper-tin alloys or castings, bronze, repair of cast bronze parts or the rebuilding of anti-friction surfaces and wear parts

Standards: AWS A5.7 ER CuSI-A

In stock

Trafimet

Reference: ME0579

2 nozzles for torch 400/500A

(1 review)

€3.21

2,63 € tax excl.

Fast delivery

2-year warranty

2 white ceramic nozzles Ø 16 mm for Ergoplus torch type 400 / 500 / 600 and 601

2 contact tube holders for 400/500A torch

In stock

Trafimet

Reference: ME0076

2 contact tube holders for 400/500A torch

(1 review)

€3.44

2,82 € tax excl.

Fast delivery

2-year warranty

M8 threaded contact tube holder for Ergoplus torch type 400 / 500 / 600 and 601

In stock

Kemppi

Reference: W008366

KEMPPI - EURO MINARC MIG Adapter

€192.15

157,50 € tax excl.

or 3 x 64,05 €

Free delivery

2-year warranty

This adapter allows you to convert your MINARC MIG unit to accept a EURO connector torch.
It must be used with the appropriate wire liner guides references SP008856 or SP008878

In stock

Soudure pro

Reference: VIP

MMA Welder Storage Carry Case

€29.48

24,17 € tax excl.

Fast delivery

2-year warranty

This carrying case allows you to store your welding machine.
Its dimensions:
Length: 44 cm - Width 33 cm - Height 18.6 cm
It is lined with foam to provide additional protection for your welding machine

In stock

Kemppi

Reference: W00

KEMPPI - Drive rolls for Minargmig welder

(1 review)

€39.65

32,50 € tax excl.

Fast delivery

2-year warranty

These drive rolls are suitable for the Minarmig 170 and 200 EVO welding machines.

2 references depending on your needs

For use with flux-cored wire diameter 0.8 to 1 mm (without gas): W001692
For use with solid steel, stainless steel or aluminum wire diameter 0.6 to 1 mm (without gas): W000749

Combinations	Price	quantity
W001692	€52.86
W000749	€39.65

In stock

Kemppi

Reference: 9591079

KEMPPI - 5 insulating rings

€17.39

14,25 € tax excl.

Fast delivery

2-year warranty

5 insulating rings compatible with KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5

* Torch model found on the MINARMIG 170 AND 200 EVO welding machines sold on our website.

In stock

Kemppi

Reference: 9580173

KEMPPI - 1 gas diffuser

(1 review)

€7.63

6,25 € tax excl.

Fast delivery

2-year warranty

1 gas diffuser compatible with KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5

* Torch model fitted on MINARMIG 170 AND 200 EVO welding machines sold on our website.

Lincoln - Remote control 1 potentiometer - 6 pins - 15 m MMA

Supplier stock

Weldline

Reference: K10095-1-15M

Lincoln - Remote control 1 potentiometer - 6 pins - 15 m MMA

(1 review)

€188.09

154,17 € tax excl.

or 3 x 62,70 €

Free delivery

2-year warranty

Remote control 1 potentiometer - 6 pins - 15 m for MMA welding machines

Supplier stock

Trafimet

Reference: MA4202-030-ALU

Trafimet - MIG Torch 250 A Ergoplus 25 Premium Aluminium

(2 reviews)

€116.91

95,83 € tax excl.

Fast delivery

2-year warranty

New MIG-MAG Torch Trafimet model Ergoplus 25 Premium

The MIG ERGOPLUS torch series has been redesigned, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new flexible spring plastic support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more durable,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.

Length 3 m fitted with a liner and a contact tip for aluminium wire Ø 1 mm

Euro connector
Air cooling.

Duty cycle: 220 A @ 60%

Supplier stock

Trafimet

Reference: MA4200-030-ALU

Trafimet - Mig Torch 150 A Ergoplus 15 Premium Aluminium

(3 reviews)

€91.50

75,00 € tax excl.

Fast delivery

2-year warranty

New MIG-MAG Torch Trafimet model Ergoplus 15 Premium

The MIG ERGOPLUS torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new flexible plastic spring support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.

Length 3 m equipped with a liner and a contact tip for aluminium wire Ø 0.8 mm

Euro connection
Air-cooled.

Duty cycle: 150 A @ 60%

In stock

Trafimet

Reference: ME0517P

TRAFIMET - 5 ceramic gas diffusers for ERGOPLUS 36 torch

(1 review)

€10.83

8,88 € tax excl.

Fast delivery

2-year warranty

5 ceramic gas diffusers for ERGOPLUS 36 and ERGOPLUS 36 Premium torch

In stock

Trafimet

Reference: MD0064-00

TRAFIMET - 5 contact tip holders for ERGOPLUS 36 torch

€12.52

10,26 € tax excl.

Fast delivery

2-year warranty

5 contact tip holders (M8 thread) for ERGOPLUS 36 and ERGOPLUS 36 Premium torches

In stock

Trafimet

Reference: ME00

TRAFIMET - 5 gas diffusers for ERGOPLUS 25 torch

(2 reviews)

€12.61

10,34 € tax excl.

Fast delivery

2-year warranty

Two references of contact tip holder/gas diffuser are available depending on the thread of your ERGOPLUS 25 and ERGOPLUS 25 Premium torch

Reference ME0016 if you have an M6 thread on the swan neck of your torch
Reference ME0040 if you have an M8 thread on the swan neck of your torch

Combinations	Price	quantity
ME0040	€21.33
ME0016	€12.61

Lincoln - BASO G basic electrodes Ø 2.5 mm pack of 1.4 kg

In stock

Lincoln Electric

Reference: 511819-1

Lincoln - BASO G basic electrodes Ø 2.5 mm pack of 1.4 kg

€36.50

29,92 € tax excl.

Fast delivery

2-year warranty

Lincoln BASO G basic electrodes length 350 mm - Ø 2.5 mm.
Vacuum packed.
Compliant with standards
AWS A5.1 / E7018-1 H4R
ISO 2560-A: E 42 5 B 32 H5
One pack contains approximately 60 electrodes

Trafimet

Reference: F490

TRAFIMET - 50 gouging electrodes length 300 mm

€17.08

14,00 € tax excl.

Fast delivery

2-year warranty

Graphite copper-coated electrodes - pencils - operating on direct current.

Combinations	Price	quantity
8 mm	€25.22
6	€17.08

Supplier stock

Trafimet

Reference: F11441

TRAFIMET - Gouging torch 600/1000A

€249.09

204,17 € tax excl.

or 3 x 83,03 €

Free delivery

2-year warranty

KRIC 5 GOUGING TORCH 1000 AMPS

KRIC 5 gouging torch, used for weld preparation or removal of defective burrs.

TELWIN - Remote control for MMA or TIG welder

Save 20%

In stock

Telwin

Reference: 802336

TELWIN - Remote control for MMA or TIG welder

€199.27

€249.09

163,34 € tax excl.

or 3 x 66,42 €

Free delivery

2-year warranty

Essential when the welding machine cannot be placed directly next to the welder, remote controls improve work efficiency and reduce welder fatigue.
Supplied with a 10 m cable.

In stock

Trafimet

Reference: ERGOPLUS-36P

MIG-MAG Torch 360 A Trafimet Ergoplus 36 Premium

(2 reviews)

€147.95

121,27 € tax excl.

Free delivery

2-year warranty

New Trafimet MIG-MAG Torch model Ergoplus 36 Premium

The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new flexible plastic spring support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more durable,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.

Length 3 m and 4 m

Euro connection
Air-cooled.

Duty cycle 300 A @ 60%
For use with welding wire Ø 0.6 to 1.6 mm
Accepts M6 threaded contact tips

originally equipped with a 1/1.2 liner and a 1.2 mm contact tip

Combinations	Price	quantity
3 M	€147.95
4 M	€168.62

In stock

Trafimet

Reference: ERGOPLUS-15P

MIG-MAG Torch 150 A Trafimet Ergoplus 15 Premium

(8 reviews)

€72.88

59,74 € tax excl.

Fast delivery

2-year warranty

New MIG-MAG Torch Trafimet model Ergoplus 15 Premium

The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural grip handle,
- new plastic spring flexible support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- reduced swan neck temperature,
- reduced consumable utilization rate.
Consumables are compatible with most European brands.

Length 3 m and 4 m

Euro connection
Air-cooled.

Duty cycle: 150 A @ 60%
For use with Ø 0.6 to 0.9 mm welding wire
Accepts M6 threaded contact tips

Originally equipped with a liner for 0.6 / 0.9 mm wire, and a 0.8 mm contact tip.

Combinations	Price	quantity
3 M	€72.88
4 M	€103.35

In stock

Trafimet

Reference: MA4202

MIG-MAG Torch 250 A Trafimet Ergoplus 25 Premium

(4 reviews)

€92.51

75,83 € tax excl.

Fast delivery

2-year warranty

New Trafimet MIG-MAG Torch model Ergoplus 25 Premium

The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new flexible plastic spring support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.

Length 3 m and 4 m

Euro connection
Air-cooled.

Duty cycle: 220 A @ 60%
For use with welding wire Ø 0.8 to 1.2 mm
Accepts M6 threaded contact tips

factory-fitted with a 1/1.2 liner and a 1mm contact tip.

Combinations	Price	quantity
3 M	€92.51
4 M	€125.10
5 M	€157.73

15 kg Spool of 600HB D1.2 Hard-Facing Wire

In stock

GEKA

Reference: 010201

15 kg Spool of 600HB D1.2 Hard-Facing Wire

(1 review)

€375.15

307,50 € tax excl.

or 4 x 93,79 €

Free delivery

2-year warranty

600 HB D1.2 hard-facing wire
Spool Ø 300 Weight: 15 kg

Rebuilding of carbon or alloy steel parts subjected to temperatures up to 300°C maximum and to wear through
combined action of metallic or mineral abrasion, with or without impact and pressure.
Quarries, mines, civil engineering, automotive industries...

Maintenance kit for PROTIG 30 and 30 W torch

Supplier stock

Weldline

Reference: W000306443

Maintenance kit for PROTIG 30 and 30 W torch

€80.31

65,83 € tax excl.

Fast delivery

2-year warranty

Maintenance kit for PROTIG 30 and 30W torch

This torch is fitted on welding machines of the Lincoln and SAFPRO brands

This kit contains:
1 short cap - 1 medium cap and 1 long cap
1 collet body Ø 1 - 1.6 - 2 - 2.4 and 3.2 mm
1 Standard nozzle 6.4 - 8 - 9.6 and 12.8 mm

GYS - 045682 Remote control foot pedal RC-FA1 for MMA or TIG machine

Supplier stock

Gys

Reference: 045682

GYS - 045682 Remote control foot pedal RC-FA1 for MMA or TIG machine

(2 reviews)

€350.75

287,50 € tax excl.

or 4 x 87,69 €

Free delivery

2-year warranty

Indispensable when the welding machine cannot be placed directly next to the welder, remote controls improve work efficiency and reduce welder fatigue.
Supplied with a 4 m cable.
8 m remote control length possible (reference 045675) available on the website

Compatible with the following Gys machines:
• PROGYS CEL 250 A TRI
• PROGYS FLEX 280 CEL
• GYSARC 300 TRI
• GYSARC 400 TRI
• EXAGON 400 CC/CV
• TIG 220 DC HF
• TIG 300 DC HF
• TITAN 400 DC HF
• TIG 201 AC/DC
• TIG 201L AC/DC
• PROTIG 201 AC/DC
• PROTIG 201L AC/DC
• TIG 220 AC/DC
• TIG 250 AC/DC
• TITANIUM 400 AC/DC

In stock

Trafimet

Reference: TT0100/1

TRAFIMET - Installation kit for TIG torch type TG 17 - 18 - 26

€12.85

10,53 € tax excl.

Fast delivery

2-year warranty

2 kits are available depending on your needs

The kit with the Ø 1.6 mm tungsten electrode reference TT0103 includes:
- 1 ceramic nozzle gr. 6 10N48,
- 1 collet 1.6 10N23,
- 1 diffuser 1.6 10N31,
- 1 turquoise tungsten (all-material welding) 1.6 length 175 mm.

The kit with the Ø 2.4 mm tungsten electrode reference TT0104 includes:
- 1 ceramic nozzle gr. 6 10N48,
- 1 collet 2.4 10N24,
- 1 diffuser 2.4 10N32,
- 1 turquoise tungsten (all-material welding) 2.4 length 175 mm.

Combinations	Price	quantity
2.4 mm	€13.42
1.6 mm	€12.85

In stock

Trafimet

Reference: TT0100/2

TRAFIMET - Installation kit for TIG torch type TG 9 - 20 - 25

€6.92

5,67 € tax excl.

Fast delivery

2-year warranty

2 kits are available depending on your needs

The kit with tungsten electrode Ø 1.6 mm reference TT0101 includes:
- 1 ceramic nozzle gr. 6 13N10,
- 1 collet 1.6 13N22,
- 1 diffuser 1.6 13N27,
- 1 turquoise tungsten (all-material welding) 1.6 length 175 mm.

The kit with tungsten electrode Ø 2.4 mm reference TT0102 includes:
- 1 ceramic nozzle gr. 6 13N10,
- 1 collet 2.4 13N23,
- 1 diffuser 2.4 13N28,
- 1 turquoise tungsten (all-material welding) 2.4 length 175 mm.

Combinations	Price	quantity
2.4 mm	€9.36
1.6 mm	€6.92

In stock

Lincoln Electric

Reference: WTT2-17B

WELDLINE WTT2-17 button TIG torch

€151.49

124,17 € tax excl.

or 3 x 50,50 €

Free delivery

2-year warranty

The BUTTON TIG WTT2-17-EB-C5B torches offer the best performance for optimised welder comfort.
Designed to meet the challenges of a variety of applications on maintenance, manufacturing or construction sites.
High-quality components, a studied and modern design — the guarantee of efficient and comfortable welding for the welder.
The torches are manufactured to high quality standards. Consumables are compatible with international standards.

Duty cycle 135A@35% -100A@60%
Usable electrode diameter: from 1 to 3.2 mm.

Supplied with: one blue lanthanum tungsten electrode Ø 2 mm + ceramic nozzle GR 6 + 1 long cap

Combinations	Price	quantity
4 M	€151.49
8 M	€174.86

2 Contact tip holders for ERGOPLUS 15 torch

In stock

Trafimet

Reference: FB0117

2 Contact tip holders for ERGOPLUS 15 torch

(5 reviews)

€6.64

5,44 € tax excl.

Fast delivery

2-year warranty

2 Contact tip holders for ERGOPLUS 15 and ERGOPLUS 15 Premium torch

In stock

Trafimet

Reference: BAGUE/3

Insulating ring for TIG torch

(1 review)

€4.67

3,83 € tax excl.

Fast delivery

2-year warranty

Two ring models depending on the type of TIG torch you have:

TQ0001P: For type 9 - 20 or 25 torch
TQ0002P: For type 17 - 18 and 26 torch

Combinations	Price	quantity
TQ0001P	€4.58
TQ0002P	€4.67

In stock

Trafimet

Reference: BAGUE/2

Insulating ring for JUMBO NOZZLE

(4 reviews)

€4.90

4,02 € tax excl.

Fast delivery

2-year warranty

Two ring models depending on the type of TIG torch you have:

TQ0026: For type 9 - 20 or 25 torch
TQ0027: For type 17 - 18 and 26 torch

For use with a JUMBO nozzle

Combinations	Price	quantity
TQ0026	€5.16
TQ0027	€4.90

Save 15%

In stock

DECA

Reference: 010821

MIG Torch for DECA MIGA 215 Welder

(2 reviews)

€45.75

€53.83

37,50 € tax excl.

Fast delivery

2-year warranty

MIG torch for DECA brand welding machine, adapted to the MIGA 215 model
Allows the use of solid wire Ø 0.6 / 0.8 mm or flux-cored wire of section Ø 0.6 to 0.9 mm

Length 2 m

110 A @ 35 %

This reference is a replacement accessory; it is not required when purchasing a new welding machine.

Sacit

Reference: F11950

1 Cleaning felt for MIG welding wire

(1 review)

€6.05

4,96 € tax excl.

Fast delivery

2-year warranty

This special cleaning felt removes all small impurities and oils before the wire enters the liner of your torch.
A clean wire ensures better arc stability and prevents inclusions in the weld pool.
It is placed between the spool and the wire feeder.

PARVA 2 electrode holder + 25 mm² cable 13 mm connector

Supplier stock

Sacit

Reference: KIT-565/567

PARVA 2 electrode holder + 25 mm² cable 13 mm connector

(10 reviews)

€47.43

38,88 € tax excl.

Fast delivery

2-year warranty

Product highlights:

Extra-flexible 25 mm² cable, both highly manageable and particularly durable
Cable duty cycle: 230 A at 60% - 180 A at 100%
High-performance electrode holder: supports 200 A at 35% and 150 A at 60%.
25 connector (9 mm male connector).
Compatible with electrodes up to 3.2 mm² in diameter
Robust die-cast brass structure
Insulating coating in thermosetting materials for optimal safety
Simple and quick stub ejection with one hand for added convenience
Product delivered assembled, ready to use

This electrode holder kit is available in lengths of 3 or 5 m

Combinations	Price	quantity
3 M	€47.43
5 M	€73.97

BINZEL

Reference: 039421

TIG welding torch SR9L for Gys welder

(2 reviews)

€201.30

165,00 € tax excl.

or 3 x 67,10 €

Free delivery

2-year warranty

Lightweight and easy to use, these torches offer ideal maneuverability for smooth and flexible welding. The molded handle with GRIP provides optimal grip for achieving the perfect weld. Thanks to its compact size, the SR 9 torch is particularly recommended for precision work on thin materials.

Cooling: Air

Length 8M
Capacity: - in direct current (DC): 110 A - in alternating current (AC): 80 A
Duty cycle: 35% Tungsten electrode: Ø 0.5 - 1.6 mm

TIG welding torch SR9L for Gys welder

TIG filler metal rods CuSn12 5 kg sleeve - bronze welding

In stock

GEKA

Reference: 5410 - CuSn12

TIG filler metal rods CuSn12 5 kg sleeve - bronze welding

(1 review)

€498.16

408,33 € tax excl.

or 4 x 124,54 €

Free delivery

2-year warranty

TIG filler metal rods CuSn12 - ER5410
Diameter: 1.6 mm
Rod length: 1 meter
5 kg sleeve
Requires the use of welding gas (Argon)

Ideal for welding deoxidized copper and copper alloys, copper-tin alloys or castings, bronze, repair of cast bronze parts or rebuilding of anti-friction surfaces and wear parts

Standards: AWS A5.7 ER CuSI-A

Supplier stock

Gys

Reference: 046238

7-pin male connector Amphenol type

€14.95

12,25 € tax excl.

Fast delivery

2-year warranty

OMEGA 4 brass earth clamp + cable length 4 m - connector 13 mm²

In stock

Sacit

Reference: KIT-255/256

OMEGA 4 brass earth clamp + cable length 4 m - connector 13 mm²

(6 reviews)

€73.97

60,63 € tax excl.

Fast delivery

2-year warranty

Two kits are available depending on the cross-section of the electrical cable

In both cases:
OMEGA 4 brass earth clamp + cable of the chosen cross-section, 4 m in length.
Duty cycle 400 A@60% and 500 A 35%
TX 50 connector

Combinations	Price	quantity
35 mm2	€73.97
50 mm²	€103.35

TIG filler metal rods CuSi3 pack 0.5 kg - copper-tin welding

In stock

GEKA

Reference: TIGCUSI3

TIG filler metal rods CuSi3 pack 0.5 kg - copper-tin welding

(11 reviews)

€35.99

29,50 € tax excl.

Fast delivery

2-year warranty

TIG CuSi3 filler metal rods - ER6560
Diameter: from 1.2 to 3 mm
Rod length: 1 metre
Pack of 0.5 kg
Requires the use of welding gas (Argon)

Filler rod for TIG welding of thin sheet metal, particularly suited to automotive repair, galvanised sheets, low-alloy copper alloys, copper-zinc materials and hardfacing of steel and cast iron

Standards: AWS A 5.7 ER CuS1-A1 - ISO 24373S cU 6560 (CuSi3Mn1)

Combinations	Price	quantity
1.2 mm	€40.05
1.6 mm	€36.42
2 mm	€35.99
2.4 mm	€31.72
3.2 mm	€29.28

Maintenance kit for PROTIG 10 and 10 W torch

Supplier stock

Weldline

Reference: W000306441

Maintenance kit for PROTIG 10 and 10 W torch

€60.49

49,58 € tax excl.

Fast delivery

2-year warranty

Maintenance kit for PROTIG 10 and 10W torch

This torch is fitted on Lincoln and SAFPRO brand welding machines

This kit contains:
1 short cap - 1 medium cap and 1 long cap
1 electrode collet body seat Ø 1 - 1.6 - 2 - 2.4 and 3.2 mm
1 Standard nozzle 6.4 - 8 - 9.6 and 12.8 mm

Electrode Holder Kit 400 A + ground clamp and cables 4 m 50 mm² 13 mm connector

In stock

Weldline

Reference: W000260682

Electrode Holder Kit 400 A + ground clamp and cables 4 m 50 mm² 13 mm connector

€215.54

176,67 € tax excl.

or 3 x 71,85 €

Free delivery

2-year warranty

This Lincoln kit includes:
1 Electrode holder 400 Amperes @35% Segura 600 + cable 50 mm² length 4 m and 35/70 connector
1 Ground clamp 400 Amperes @35% Hippo 600 + cable 50 mm² length 4 m and 35/70 connector

In stock

Weldline

Reference: RESTORINOX-G

WELDLINE - RESTORINOX GEL for stainless steel

(2 reviews)

€24.40

20,00 € tax excl.

Fast delivery

2-year warranty

Final treatment phase to restore the stainless property of steel

Available in 2 and 10 kg pots in gel form

This is the final phase of the entire process, necessary to restore the stainless property of steel.

This removes contamination from the surface of stainless steel after various work phases and thus regenerates the oxide layer that gives stainless steel its properties.

In fact, this work phase recreates the chrome layer damaged by heat, while reducing the spontaneous oxidation time.

Through this process, the oxide layer that protects against external agents is restored.

How to use RESTORINOX?

First, degrease and pickle the area to be treated with the specific products CLEANOX and PICKLINOX. Then apply the product.

Rest times will vary from 20 to 60 minutes.

At the end of the treatment, rinse the product with water. Do not expose the product or the treated surface to sunlight or any atmospheric agent.

Combinations	Price	quantity
2 Kg	€24.40
10 Kg	€125.97

In stock

Weldline

Reference: PICKINOX-P

WELDLINE -PICKLINOX- PASTE Stainless Steel Pickling Agent

(4 reviews)

€23.89

19,58 € tax excl.

Fast delivery

2-year warranty

Removes oxides after stainless steel welding.

Available in 2 kg and 10 kg jars in paste form

Pickling is the operation that removes all oxides after welding, by eliminating the surface layer depleted as a result of heat treatment.
It is the most important step in the treatment process.
It should be noted that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not only mean cleaning the weld beads but primarily consists of restoring the characteristics of stainless steel.

How to use Picklinox paste?

Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable period depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.

Combinations	Price	quantity
2 Kg	€23.89
10 Kg	€94.55

In stock

Weldline

Reference: PICKLINOX- GEL

WELDLINE - PICKLINOX- GEL Stainless steel pickling agent

(4 reviews)

€24.91

20,42 € tax excl.

Fast delivery

2-year warranty

Removes oxides after stainless steel welding.

Available in 2 kg and 10 kg tubs in gel form

Pickling is the operation that removes all oxides after welding, by removing the surface depleted as a result of heat treatment.
It is the most important step in the treatment process.
It must be taken into account that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not simply mean cleaning the weld beads but primarily consists of restoring the stainless steel's characteristics.

How to use Picklinox paste?

Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable time depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.

Combinations	Price	quantity
2 Kg	€24.91
10 Kg	€100.65

Gys

Reference: 039490

Cooling unit for TIG welder GYS 220 DC

€604.91

495,83 € tax excl.

or 4 x 151,23 €

Free delivery

2-year warranty

The WCU 0.5KW A cooling unit enables cooling of liquid-cooled TIG torches.
Controlled and powered by the GYS TIG 220 DC welding generator, its operation is determined by the action on the torch. It activates automatically when TIG welding begins.

Tank capacity: 1.5 L

Adapter for tungsten electrode sharpener WAG 40

In stock

Gys

Reference: AWAG

Adapter for tungsten electrode sharpener WAG 40

€29.74

24,38 € tax excl.

Fast delivery

2-year warranty

Two sizes are available
These adapters are designed to be used with the WAG 40 sharpener

045446 for tungsten electrodes Ø 1 mm
722050 for tungsten electrodes Ø 1.6 mm
045453 for tungsten electrodes Ø 2 mm

Combinations	Price	quantity
045446	€29.74
045453	€29.74
722050	€29.74

LINCOLN | Mig-Mag Torch Lincoln LGS3-360G

In stock

Lincoln Electric

Reference: W10430-36

LINCOLN | Mig-Mag Torch Lincoln LGS3-360G

€146.40

120,00 € tax excl.

Free delivery

2-year warranty

Lincoln LGS3 360G torch - EURO connector.

Available length 3 - 4 and 5 m

Ergonomic handle for comfortable welding day after day
Cable articulation via unique and flexible ball joint for comfortable welding in all positions.

Duty cycle 330 A @ 60% (CO² gas)
For wire diameter 0.8 to 1.6 mm
Supplied with a contact tip Ø 1.2 mm (M8 thread) and a conical gas nozzle Ø 16 mm.

Combinations	Price	quantity
3 M	€146.40
4 M	€161.25
5 M	€202.31

GYS - 045675 manual remote control RC-HA1 for MMA or TIG welding machine

Supplier stock

Gys

Reference: 045675

GYS - 045675 manual remote control RC-HA1 for MMA or TIG welding machine

€198.25

162,50 € tax excl.

or 3 x 66,08 €

Free delivery

2-year warranty

manual remote control RC-HA1

Compatible with the following Gys welding machines:
• PROGYS CEL 250 A TRI
• PROGYS FLEX 280 CEL
• GYSARC 400 TRI
• EXAGON 400 CC/CV
• TIG 200 DC HF FV
• TIG 220 DC HF
• TIG 300 DC HF
• TITAN 400 DC HF
• TIG 200 AC/DC
• TIG 220 AC/DC
• TIG 250 AC/DC
• TITANIUM 400 AC/DC

Supplier stock

Telwin

Reference: 802017

TELWIN - Remote control foot pedal for MMA or TIG machine

(1 review)

€280.60

230,00 € tax excl.

or 3 x 93,53 €

Free delivery

2-year warranty

Indispensable when the welding machine cannot be placed directly next to the welder, remote controls improve work efficiency and reduce welder fatigue.
Supplied with a 10 m cable.

Stainless steel wire 316 L diameter 0.8 mm spool Ø 100 mm weight 700 g

Soudure pro

Reference: 010900

Stainless steel wire 316 L diameter 0.8 mm spool Ø 100 mm weight 700 g

(8 reviews)

€28.37

23,25 € tax excl.

Fast delivery

2-year warranty

Spool of 316 L stainless steel wire Ø 0.8 mm. Weight 700 g

The use of this welding wire requires a shielding gas during operation (Argon + CO² or Argon + O²).

This wire allows welding of STAINLESS STEEL including food-grade stainless steel.
The spool diameter is Ø 100 mm
Delivered in a protective plastic film + cardboard box.

HELVI

Reference: 23005007

2 gas nozzles diameter 10 mm for Helvi Fox 160 - Panther 132

(7 reviews)

€8.89

7,29 € tax excl.

Fast delivery

2-year warranty

This nozzle fits on the end of your MIG torch

Its role is to direct the gas flow toward the weld and the melting wire.
This nozzle has an internal thread fitting the torches of HELVI Fox 160 and Panther 132 welding machines

DECA

Reference: KITBOUT

DECA disposable gas cylinder support kit

(7 reviews)

€4.88

4,00 € tax excl.

Fast delivery

2-year warranty

This support kit for disposable gas cylinders allows you to hold disposable welding gas cylinders with a volume of 1 L or 2.2 L.

It is suitable for DECA machines:

Decastar 135 EVO.
Startwin 135 EVO.

PARVA 2 Electrode Holder + 3 m 16 mm² cable - 9 mm connector

In stock

Sacit

Reference: KIT-514

PARVA 2 Electrode Holder + 3 m 16 mm² cable - 9 mm connector

(23 reviews)

€45.64

37,41 € tax excl.

Fast delivery

2-year warranty

Extra-flexible 16 mm² cable, easy to handle and durable
Cable duty cycle: 230 A at 60% - 180 A at 100%
High-performance electrode holder: supports 200 A at 35% and 150 A at 60%
TSK 25 connector (9 mm male connector)
Compatible with electrodes up to 3.2 mm in diameter
Robust die-cast brass structure
Simple and quick one-handed stub ejection
Product delivered assembled, ready to use

This electrode holder kit is available in lengths of 3 (KIT-565) or 5 meters (KIT-567)

GYS Torch Kit for TIG LIFT welding SR17V - 35/50 - 13mm

BINZEL

Reference: 044401

GYS Torch Kit for TIG LIFT welding SR17V - 35/50 - 13mm

(6 reviews)

€122.00

100,00 € tax excl.

Free delivery

2-year warranty

This GYS TIG torch is delivered with an accessories kit including:
1 tungsten electrode Ø 1.6 and 1 tungsten electrode Ø 2.4 mm
1 ceramic nozzle no. 5 and 1 ceramic nozzle no. 11
1 collet body, collet and nozzle Ø 1.6 mm and 1 collet body, collet and nozzle Ø 2.4 mm
1 short back cap (for hard-to-reach areas) and 1 standard long back cap

Length 4 m. Quarter-turn 35/50 connector
Duty cycle at 60%: 140 A DC and 125 A AC.
Usable tungsten electrodes: up to 2.4 mm

This torch fits in particular on GYS welding machines with reference:
Progys 200E FV CEL - 250 TRI - CEL 250 TRI - FLEX 250 CEL

Save 20%

In stock

Magmaweld

Reference: ESR1132K1

MAGMAWELD

€12.14

€15.18

9,95 € tax excl.

Fast delivery

2-year warranty

1 kg pack - 32 rods Ø 3.2mm

Arc striking from 40V - Direct current. Negative (-) polarity at the electrode.

Classification:

MAGMAWELD | rutile electrodes Ø 3.2 mm for steel welding 5 KG

Save 10%

In stock

Magmaweld

Reference: ESR1132K5

MAGMAWELD | rutile electrodes Ø 3.2 mm for steel welding 5 KG

(1 review)

€28.06

€31.18

23,00 € tax excl.

Fast delivery

2-year warranty

5 kg pack - 165 rods Ø 3.2mm
Easy arc striking and re-striking
Good weldability in all positions
Flat slightly convex beads and easy slag removal
Excellent bead appearance

Arc striking from 40V - Direct current. Negative (-) polarity at the electrode.

Classification:
AWS A 5.1 : E6013
EN ISO 2560-A : E 420 RC 11

Save 20%

Magmaweld

Reference: ESR1125K1

MAGMAWELD | rutile electrodes Ø 2.5 mm for steel welding

€10.37

€12.97

8,50 € tax excl.

Fast delivery

2-year warranty

1 kg box - 54 rods Ø 2.5 mm
Easy arc striking and re-striking
Good weldability in all positions
Flat, slightly convex beads and easy slag removal
Excellent bead appearance

Arc striking from 40V - Direct current. Negative (-) polarity at the electrode.

Classification:
AWS A 5.1 : E6013
EN ISO 2560-A : E 420 RC 11

KEMPPI - Valve type 17 TIG torch 9mm connector TX25

Save 15%

In stock

Kemppi

Reference: TX 163 GV D9 4M

KEMPPI - Valve type 17 TIG torch 9mm connector TX25

€259.25

€305.00

212,50 € tax excl.

or 3 x 86,42 €

Free delivery

2-year warranty

This valve-type 17 TIG torch is supplied with a long back cap, 1 grey cerium tungsten electrode Ø 2.4 mm, 1 nozzle and a diffuser.

Its length is 4 m with a 9 mm connector (for a cable cross-section ranging from 10 to 25 mm²).

This Flexlite TX TIG torch 163 GV 4M offers excellent technical performance, extended consumable life and everyday welding comfort.
The durable silicone rubber material ensures a firm grip while the innovative torch handle design reduces wrist strain, allowing welders to focus on challenging tasks to achieve the perfect weld.

DBP |Acid-resistant brush for stainless steel passivation, wooden handle

dbp

Reference: MATTRA127

DBP |Acid-resistant brush for stainless steel passivation, wooden handle

€12.91

10,58 € tax excl.

Fast delivery

2-year warranty

This brush is used for applying stainless steel cleaning products.
Wooden handle, acid-resistant.

Brush width 30 mm
Handle length 30 cm

In stock

SILICONI

Reference: RIVELEX 200

SILICONI | RIVELEX 200 - Porosity or crack detector

(1 review)

€10.68

8,75 € tax excl.

Fast delivery

2-year warranty

RIVELEX 200 is an aerosol product for detecting cracks or porosity caused by welding in all types of materials. Thanks to its composition, RIVELEX 200 can be applied very quickly, as it contains fast-evaporating solvents that leave a white powder on treated surfaces, enabling crack detection.
It can be used with red and fluorescent penetrants (PENTRIX 100).

400 ml aerosol

INSTRUCTIONS FOR USE
Shake the aerosol for at least one minute before use.
Spray RIVELEX 200 at a distance of approximately 20 to 30 cm onto the part that has been previously treated with a liquid penetrant.
Wait 10 to 20 minutes for the product to be fully effective.
Then inspect the treated materials.
This product causes no damage to treated materials.
The bases used comply with the regulations, ASME 2644 type II; MIL-I-25135 form D type II..

CHARACTERISTICS
Base: Mixture of solvents and white powders
Propellant: Denatured hydrocarbon, odorless
Appearance: White liquid
CFC-FREE

In stock

SILICONI

Reference: SUPER CLEANER

SILICONI | SUPER CLEANER - Detergent for oil, grease, dirt and sludge

€9.66

7,92 € tax excl.

Fast delivery

2-year warranty

SUPER CLEANER is a fast and powerful cleaner for removing: oils, greases, stains, dirt, and sludge. It is suitable for cleaning engines, gears, chains, hard surfaces, chrome parts, plastics, steel, bicycles, aluminium painted parts, chains, and gearboxes. It does not damage rubber, plastic, or carbon frames. Free from petroleum solvents. It contains additives that leave a shiny, protective film on treated surfaces. It does not corrode or scratch treated materials. BIODEGRADABLE.

Thanks to its formula, it can penetrate and dissolve all types of dirt or encrustation.

750 ml spray bottle

It cleans without leaving greasy residues.

Suitable for cleaning: industrial machines, workbenches, engines, chrome frames, chains, chrome parts, external engine parts, nozzles, mechanical movements, plates, iron parts, copper, engine parts, car rims.

SUPER CLEANER reduces the adhesion of dirt on treated surfaces.

✓ Non-flammable
✓ Non-toxic
✓ Ammonia-free
✓ Non-abrasive

INSTRUCTIONS FOR USE
Wet the parts to be cleaned with water, then apply SUPER CLEANER onto them.
Wait a few minutes for the product to act and dissolve the dirt.
Then remove the dirt with a cloth.
Repeat the operation if the dirt is difficult to remove.
It can also be diluted with water to clean delicate surfaces or fabrics.

CHARACTERISTICS
Base: Mixture of detergents and degreasers
Appearance: Transparent amber liquid
Odour: Fragranced
pH: Alkaline
Viscosity: Fluid
Biodegradability: Over 80%

In stock

SILICONI

Reference: PENTRIX 100

SILICONI | PENTRIX 100 - Crack detector

(1 review)

€13.73

11,25 € tax excl.

Fast delivery

2-year warranty

PENTRIX 100 is a red penetrant liquid in aerosol form, formulated to reveal cracks, crazes or porosity caused by welding on ferrous materials and other metals.
Thanks to its intense colour and composition, PENTRIX can penetrate the most complex areas and reveal cracks and crazes caused by welding.

400 ml aerosol

INSTRUCTIONS FOR USE
Shake well before use.
1. Degrease and clean the surface to be treated with METACLEAN aerosol degreaser;
2. Spray PENTRIX 100 on the parts to be inspected;
3. Wait 10 to 70 minutes for the product to fully penetrate.
4. Clean the treated surfaces with water or solvent. Do not spray solvent aerosol directly onto treated surfaces as this could remove all of the red liquid.

CHARACTERISTICS
Base: Mixture of petroleum distillates, dyes and surface tension protectors.
Appearance: Red liquid
Propellant: Denatured hydrocarbon, non-toxic and odourless
CFC-FREE

In stock

SILICONI

Reference: METALCLEAN 300

SILICONI | METALCLEAN 300 - Cleaner for steel or aluminum

(1 review)

€6.05

4,96 € tax excl.

Fast delivery

2-year warranty

METACLEAN is a degreaser and aerosol cleaner for metals.
It removes all types of dirt present on metal: oil traces, grease, incrustations, tar, carbon and adhesive residues. It is also effective on steel and aluminum.

400 ml aerosol can

INSTRUCTIONS FOR USE
(Concentrated product – shake well before use)
Spray onto surfaces to be treated, then clean with a cloth or with compressed air.

CHARACTERISTICS
Base: Mixture of solvents and degreasers with low surface tension
Appearance: Clear liquid
Propellant: Denatured hydrocarbon, non-toxic, odorless, colorless.
DOES NOT CONTAIN CFC

In stock

SILICONI

Reference: PROTECT 700

SILICONI | Can of anti-spatter for welding

(1 review)

€55.82

45,75 € tax excl.

Fast delivery

2-year warranty

PROTECT 700 is an anti-spatter liquid used to prevent the adhesion of slag or welding spatter.
This product contains no silicone and therefore allows subsequent surface treatments (painting, galvanizing, chromating).
PROTECT 700 can be used in an enclosed space as it is neither flammable nor toxic.
It can be diluted with water in a ratio of 1 to 5; for welding robots, it is recommended to dilute the product with water in a ratio of 1 to 1; for application with a pump, it is possible to use the product pure or diluted 1 to 1.

Base: Synthetic oil, silicone-free.
Appearance: Light yellow
Viscosity at 25°C: 30-100 cSt (Brookfield)
Temperature resistance: from -2°C to +200°C
Biodegradability: over 80%
Dilution: with water in all proportions
pH: 7 to 8
Non-flammable, non-toxic, odorless.

INSTRUCTIONS FOR USE
• Fill a sprayer:
• Spray at 20 cm from the part to be protected
• Deposits a thin, uniform film facilitating the rapid removal of welding spatter
• Remove with a degreaser or cleaner before galvanizing or painting the part(s) that have received SOUDURE ANTI GRATTONS

It is also possible to apply this anti-spatter product with a brush on the surface to be treated.

Combinations	Price	quantity
25 L	€145.49
5 L	€55.82

TIG filler rods - STAINLESS STEEL 309 L pack 950 g

In stock

GEKA

Reference: TIG309L

TIG filler rods - STAINLESS STEEL 309 L pack 950 g

(1 review)

€24.40

20,00 € tax excl.

Fast delivery

2-year warranty

Stainless steel 309 L TIG filler rods
Non-food grade welding.
Standard AWS A 5.9 ER 309L
Standard 14343-a w 23 12 L

1.6 - 2 and 2.4 mm.

Rod length 100 cm.
Pack of 950 g.

309L is often used in applications where stainless steels need to be welded to carbon steels or mild steels, as it offers good compatibility with both types of metals, while maintaining good corrosion resistance and good mechanical strength.

The main characteristics of 309L TIG include:

Good corrosion resistance: Thanks to its chromium and nickel content, 309L offers excellent corrosion resistance, even at high temperatures.
High service temperature: It can be used at high temperatures, making it ideal for high-temperature applications.
Low carbon content: The low carbon content reduces susceptibility to intergranular corrosion after welding.

This type of material is often used in industrial applications such as heat exchangers, industrial furnaces, chemical and petrochemical equipment, as well as in shipbuilding and marine applications.

Combinations	Price	quantity
1.6 mm	€24.40
2 mm	€26.84
2.4 mm	€29.28

TIG filler rods - Stainless Steel 309 L tube 5 kg

Supplier stock

GEKA

Reference: TIG309L/5kg

TIG filler rods - Stainless Steel 309 L tube 5 kg

€120.78

99,00 € tax excl.

Free delivery

2-year warranty

309 L stainless steel TIG filler rods
Allows welding of a
Standard AWS A 5.9 ER 309L
Standard ISO 14343-A W 23 12 L

Diameter 1.6, 2 and 2.4 mm.

Rod length 100 cm.
Tube of Kg.

309L is often used in applications where stainless steels need to be welded to carbon steels or mild steels, as it offers good compatibility with both types of metals, while maintaining good corrosion resistance and good mechanical strength.

The main characteristics of 309L TIG include:

Good corrosion resistance: Thanks to its chromium and nickel content, 309L offers excellent corrosion resistance, even at high temperatures.
High service temperature: It can be used at high temperatures, making it ideal for high-temperature applications.
Low carbon content: The low carbon content reduces susceptibility to intergranular corrosion after welding.

This type of material is often used in industrial applications such as heat exchangers, industrial furnaces, chemical and petrochemical equipment, as well as in shipbuilding and marine applications.

Combinations	Price	quantity
1.6 mm	€120.78
2 mm	€115.90
2.4 mm	€108.58

LINCOLN |Lincoln LGS3-250G MIG-MAG Torch

In stock

Lincoln Electric

Reference: W10430-25

LINCOLN |Lincoln LGS3-250G MIG-MAG Torch

(4 reviews)

€89.46

73,33 € tax excl.

Fast delivery

2-year warranty

Lincoln LGS3 250A torch - EURO connector

Available lengths: 3, 4 and 5 m

Ergonomic handle for comfortable welding day after day
Cable articulation via a unique and flexible ball joint for comfortable welding in all positions.

Duty cycle 230 A @ 60% (CO² gas)
For wire diameter 0.8 to 1.2 mm
Supplied with a Ø 1 mm contact tip (M6 thread), a Ø 15 mm conical gas nozzle, and a 1/1.2 liner.

Combinations	Price	quantity
3 M	€89.46
4 M	€105.74
5 M	€122.00

LINCOLN |Lincoln LGS3-150G MIG-MAG Torch

In stock

Lincoln Electric

Reference: W10430-15

LINCOLN |Lincoln LGS3-150G MIG-MAG Torch

(1 review)

€64.05

52,50 € tax excl.

Fast delivery

2-year warranty

Lincoln LGS3 torch 150A - EURO connector

Available length: 3 and 4 m

Ergonomic handle for comfortable welding day after day
Swivel handle, easy to handle
Extra flexible cable

Duty cycle 150 A @ 60%
Applications: Thin sheet metal and automotive
For wire Ø 0.6 to 1 mm
Supplied with a contact tip Ø 0.8 mm (M6 thread) and a conical gas nozzle Ø 12 mm.

Combinations	Price	quantity
3 M	€64.05
4 M	€79.30

In stock

Trafimet

Reference: MT0580

TRAFIMET |Accessory kit for MIG torch 150 A

(1 review)

€29.93

24,53 € tax excl.

Fast delivery

2-year warranty

Compatible with any MB15 type torch, this kit includes:
10 contact tips Ø 0.8 M6 steel / stainless steel
10 contact tips Ø 1.0 M6 steel / stainless steel
2 gas diffusers
2 nozzle springs
2 gas nozzles Ø 12 mm - Length 53 mm

In stock

GEKA

Reference: ELOX R316L

GEKA | ELOX - Stainless Steel Electrodes 316L - 1 kg case

(10 reviews)

€36.45

29,88 € tax excl.

Fast delivery

2-year warranty

Rutile electrodes for welding unstabilised austenitic stainless steels of type 18/8/3.
Supplied in a plastic case.
Standard AWS A 5.4 - E 316-16
Standard ISO 3581-A - E 19 12 3 L R 12

The Ø 2 mm electrode pack contains 0.7 kg, i.e. 104 pieces. Length 250 mm
The Ø 2.5 mm electrode pack contains 1 kg, i.e. 64 pieces. Length 300 mm
The Ø 3.2 mm electrode pack contains 1 kg, i.e. 27 pieces. Length 300 mm

Combinations	Price	quantity
2 mm	€36.45
2.5 mm	€31.01
3.2 mm	€25.72

Supplier stock

GEKA

Reference: LOTUS

Geka|Lotus - RUTILE Electrodes for steel welding 1 kg pack

(3 reviews)

€9.91

8,13 € tax excl.

Fast delivery

2-year warranty

Rutile electrodes for steel welding
Supplied in a plastic case

Standard AWS A 5.1 - E 6013
Standard ISO 2560-A - E 42 0 RC11

The pack of Ø 2.5 mm electrodes contains 1 kg, i.e. 54 pieces, length 350 mm
The pack of Ø 3.2 mm electrodes contains 1 kg, i.e. 34 pieces. Length 350 mm

Combinations	Price	quantity
2.5 mm	€9.91
3.2 mm	€9.56

Lincoln - Remote control 1 potentiometer -6 pins -15 m TIG

Supplier stock

Weldline

Reference: K14147-1

Lincoln - Remote control 1 potentiometer -6 pins -15 m TIG

€228.75

187,50 € tax excl.

or 3 x 76,25 €

Free delivery

2-year warranty

Remote control 1 potentiometer -6 pins -15 m for Lincoln TIG welders

In stock

Trafimet

Reference: MC0025

2 tack welding nozzles Ø 18 mm

€16.17

13,25 € tax excl.

Fast delivery

2-year warranty

This spot welding nozzle fits on the end of your MIG torch and guides you in your spot welding work by allowing you to see your weld point, unlike a standard gas nozzle.
Very useful for bodywork or thin sheet metal work.

Suitable for Lincoln torches models LGS and LGP 250

Length: 68 mm
Diameter: 18 mm

Save 20%

In stock

Telwin

Reference: 803400

Telwin - Site case for welder

€171.82

€214.77

140,83 € tax excl.

or 3 x 57,27 €

Free delivery

2-year warranty

Site case for safely transporting your TIG or MMA welder.
Resistant to shocks and moisture.
Internal dimensions 46.5 x 33.5 x H 22 cm - Weight 3.5 kg.

In stock

SOUDO METAL

Reference: 170.00

Screw-type electrode holder 150 A

(2 reviews)

€9.66

7,92 € tax excl.

Fast delivery

2-year warranty

Screw-type electrode holder 150 Amperes
Duty cycle 200 A@35% - 150 A@ 60%
Compatible with rutile, basic or cellulosic electrodes from Ø 1.6 to 4 mm
Maximum cable cross-section: 35 mm²
Electrode locking by screw
RIGHT-hand thread
Full insulation
Compliant with standard EN-60-974-11

Lincoln - 1 Drive Roll for BESTER 190 C -Multi and 215 MP welder

Lincoln Electric

Reference: S33444

Lincoln - 1 Drive Roll for BESTER 190 C -Multi and 215 MP welder

(2 reviews)

€11.38

9,33 € tax excl.

Fast delivery

2-year warranty

These drive rolls are designed for Lincoln welder models in the BESTER 190C -Multi and 215MP range

4 drive rolls available depending on the Ø and type of wire to be welded:

For solid steel or stainless steel wire Ø 0.6 / 0.8 mm ( Lincoln reference S33444-20 )
For solid steel or stainless steel wire Ø 0.8 / 1 mm ( Lincoln reference S33444-21 )

For solid aluminium wire Ø 0.8/ 1 mm ( Lincoln reference S33444-22 )
For flux-cored wire Ø 0.9 / 1.2 mm ( Lincoln reference S33444-23 )

The drive roll is reversible; with one drive roll you have two possible wire diameters.

Combinations	Price	quantity
0.6 / 0.8 mm	€11.38
0.8 / 1 mm	€11.08
AL 0.8 / 1 mm	€11.08
flux-cored wire 0.8 - 0.9 - 1.2 mm	€14.24

TIG CuSi3 filler metal rods 5 kg sleeve - copper-tin welding

In stock

GEKA

Reference: 6560

TIG CuSi3 filler metal rods 5 kg sleeve - copper-tin welding

(2 reviews)

€298.90

245,00 € tax excl.

or 3 x 99,63 €

Free delivery

2-year warranty

TIG CuSi3 filler metal rods - ER6560
Diameter: 1.2 to 3 mm
Rod length: 1 metre
5 kg sleeve
Requires the use of welding gas (Argon)

TIG filler rod for welding thin sheet metal, particularly suited to automotive repair, galvanised sheet metal, low-alloy copper alloys, copper-zinc materials and build-up welding of steel and cast iron

Standards: AWS A 5.7 ER CuS1-A1 - ISO 24373S cU 6560 (CuSi3Mn1)

Combinations	Price	quantity
1.2 mm	€335.50
1.6 mm	€300.12
2 mm	€298.90
2.4 mm	€279.38
3 mm	€291.58

In stock

Weldline

Reference: W000278885

WELDLINE - TIG valve torch WTT2 -26V 13 mm connector

€119.96

98,33 € tax excl.

Fast delivery

2-year warranty

This type 26 valve torch is supplied with a long cap, 1 blue lanthanum tungsten electrode Ø 2.4 mm, 1 nozzle and a diffuser.

Its length is 4 m - 13 mm connector

Duty cycle: 180 A@35% - 160 A@60%
Accepts tungsten electrodes from 1 mm to 4 mm (with the appropriate diffuser and electrode holder collet).

Supplied with an electrode holder + 1 collet body for tungsten electrode Ø 2.4 mm + 1 ceramic nozzle Ø 12.8 mm

It is used in particular for TIG welding with Inverter machines

DECA:
Mastro 314-416 and 518 HD GEN
JOB 220 - 522 - 523 with adapter (038110 available on the website)

LINCOLN
Bester 170D-ST - 210D-ST-Bester 170D-ND - 210D-ND

TELWIN
Electromig 220 - 300 -400 - 450 -550- Electromig 230 - 330 Wave- Technomig 243 Wave
Superior 400 - 630 CE VRD
Technology 186 XT MPGE - 236 XT - 238 XT CE/MPGE
Advance 227 XT MV/PFC VRD

In stock

Weldline

Reference: W10529-17-4V

WELDLINE - TIG valve torch WTT2 type 17 connector 13 mm TX35/50

(3 reviews)

€137.25

112,50 € tax excl.

Free delivery

2-year warranty

This type 17 valve torch comes with a long cap, 1 blue lanthanum tungsten electrode Ø 2 mm, 1 nozzle and a diffuser.

Its length is 4 m, 13 mm connector

Duty cycle: 135 A@35% - 100 A@60%
Accepts tungsten electrodes from 1 mm to 2.4 mm (with the appropriate diffuser and electrode holder clamp).

Supplied with an electrode holder + 1 clamp for tungsten electrode Ø 2 mm + 1 ceramic nozzle Ø9.6 mm

It is used in particular for TIG welding with Inverter machines

DECA:
Mastro 314-416 and 518 HD GEN
JOB 220 - 522 - 523 with adapter (038110 available on the site)

LINCOLN
Bester 170D-ST - 210D-ST - Bester 170D-ND - 210D-ND

TELWIN
Electromig 220 - 300 - 400 - 450 - 550 - Electromig 230 - 330 Wave - Technomig 243 Wave
Superior 400 - 630 CE VRD -

2 conical gas nozzles diameter 16 mm - Length 76 mm

In stock

Trafimet

Reference: MC0568

2 conical gas nozzles diameter 16 mm - Length 76 mm

(1 review)

€13.70

11,23 € tax excl.

Fast delivery

2-year warranty

2 gas nozzles Ø 16 mm - Length 76 mm
Steel thickness 2.5 mm.
Suitable for use on a 500 A torch

In stock

Trafimet

Reference: ERGOPLUS-500

MIG-MAG 500 A Ergoplus 500 Torch

(1 review)

€185.04

151,67 € tax excl.

or 3 x 61,68 €

Free delivery

2-year warranty

ERGOPLUS 500 EURO TORCH Water-cooled.

The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new double swivel joint,
- removable torch handle (included in all standard torch assemblies),
- cable assembly fitted with a new reduced surface friction, for smooth movement without snagging,
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- new rear housing to prevent crushing of water hoses,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.

Length 3 m and 4 m

Euro connection
Water cooling - 1.6 L/minute

Duty cycle 450 A @ 100% with mixed gas
For use with welding wire Ø 1 to 2.4 mm
Accepts M8 threaded contact tips

factory-equipped with a liner for steel or stainless steel wire Ø 1.2/1.6 mm and a 1.2 mm contact tip

Combinations	Price	quantity
3 M	€185.04
4 M	€223.00

LINCOLN - Valve TIG torch type 9 length 4 m

In stock

Weldline

Reference: W000278876

LINCOLN - Valve TIG torch type 9 length 4 m

(1 review)

€90.49

74,17 € tax excl.

Fast delivery

2-year warranty

Valve-type TIG torch type 9V delivered with:
1 long cap
1 lanthanum tungsten electrode Ø 1.6 mm
1 nozzle and a diffuser

Its length is 4 m, 9 mm connector
DC duty cycle: 110 A@35% - 80 A@60%
Accepts tungsten electrodes from Ø 1 to 3.2 mm (with the appropriate diffuser and electrode holder collet)

LINCOLN - TIG valve torch type 17 9mm connector TX25

In stock

Weldline

Reference: W000278880

LINCOLN - TIG valve torch type 17 9mm connector TX25

(8 reviews)

€96.59

79,17 € tax excl.

Fast delivery

2-year warranty

Type 17V valve TIG torch with valve, supplied with:
1 long cap
1 lanthanum tungsten electrode Ø 1.6 mm
1 nozzle and a diffuser

Its length is 4 m, 9 mm connector
DC duty cycle: 135 A@35% - 100 A@60%
Accepts tungsten electrodes from Ø 1 to 3.2 mm (with the appropriate diffuser and electrode holder)

In stock

Kemppi

Reference: GAINE-SP

KEMPPI - Wire guide liner for steel or stainless steel for EURO MINARMIG adapter

€12.10

9,92 € tax excl.

Fast delivery

2-year warranty

Wire guide liners for steel or stainless steel wire from Ø 0.6 to 1 mm depending on the chosen reference

These liners are designed to be used with the EURO adapter for MINARMIG 170 OR 200 welding machines (reference W008366)

Combinations	Price	quantity
0.6 / 0.8 mm	€12.10
0.9 / 1 mm	€12.10

Supplier stock

Kemppi

Reference: 958010101

KEMPPI - 2 gas nozzles + insulator

(2 reviews)

€19.83

16,25 € tax excl.

Fast delivery

2-year warranty

2 gas nozzles diameter 14 mm - Length 60.5 mm.

Compatible with KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5

* Torch model fitted on MINARMIG 170 AND 200 EVO machines sold on our website.

In stock

Kemppi

Reference: 4307660

KEMPPI - Wire liner for aluminium wire

(1 review)

€58.16

47,67 € tax excl.

Fast delivery

2-year warranty

Teflon wire liner for aluminium wire Ø 0.6 to 1 mm.
Compatible with KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5

* Torch model fitted on MINARMIG 170 AND 200 EVO welding machines sold on our website.

In stock

Kemppi

Reference: 4307650

KEMPPI - Wire guide liner for steel or stainless steel

€27.80

22,79 € tax excl.

Fast delivery

2-year warranty

Wire guide liner for steel or stainless steel wire Ø 0.6 to 1 mm.
Suitable for KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5

* Torch model fitted on the MINARMIG 170 AND 200 EVO welding machines sold on our website.

In stock

Trafimet

Reference: GM0512

Trafimet wire liner for MIG torch steel or stainless steel welding Length 5 M

€8.59

7,04 € tax excl.

Fast delivery

2-year warranty

Wire liner for steel or stainless steel wire - Length 5 m for wire Ø 1 and 1.2 mm.
Inner diameter 2 mm and outer diameter of the liner 4.6 mm

In stock

Trafimet

Reference: MF15

TRAFIMET - Swan neck for Mig Ergoplus Premium torch

€11.19

9,17 € tax excl.

Fast delivery

2-year warranty

Swan neck for MIG-MAG torch Trafimet, Ergoplus

Reference MF1515 is intended for the Ergoplus Premium 15 model
Reference MF0017 is intended for the Ergoplus Premium 25 model
Reference MF0019 is intended for the Ergoplus Premium 36 model

Combinations	Price	quantity
MF1515	€11.19
MF1517	€21.35
MF1519	€35.59 €28.47

In stock

GEKA

Reference: ELHARD 600R1KG

GEKA Hard-Facing Electrodes CASE 1 kg

(5 reviews)

€19.83

16,25 € tax excl.

Fast delivery

2-year warranty

Electrode for hard-facing of construction machine parts or tools subject to heavy abrasion, high pressure or impact.
Compact deposit, machinable by grinding.
Smooth fusion, low spatter, compatible with welding machines with very low arc ignition voltage.

Example of use:
Hard-facing of dies, scrapers, buckets and bucket teeth, excavation equipment, chisels, conveyor screws, crawler chain links, cutting tools

The Ø 3.2 mm electrode pack contains 1 kg, i.e. 24 pieces, length 350 mm - welding current from 90 to 135 A

In stock

GEKA

Reference: ELHARD 600R

GEKA HARDFACING Electrodes Case of 4.5 / 6 kg

(4 reviews)

€80.31

65,83 € tax excl.

Fast delivery

2-year warranty

Electrode for use in hard hardfacing of construction machine parts or tools subject to heavy abrasion, high pressure or impact.
Compact deposit, machinable by grinding.
Smooth fusion, low spatter, usable with machines with very low arc ignition voltage.

Examples of use:
Hardfacing of dies, scrapers, buckets and bucket teeth, excavation equipment, chisels, conveyor screws, track links, cutting tools

The Ø 3.2 mm electrode pack contains 4.5 kg, i.e. 108 pieces. Length 350 mm - welding current from 90 to 135 A
The Ø 4 mm electrode pack contains 6 kg, i.e. 72 pieces. Length 450 mm - welding current from 135 to 180 A
The Ø 5 mm electrode pack contains 6 kg, i.e. 48 pieces. Length 450 mm - welding current from 180 to 230 A

Combinations	Price	quantity
3.2 mm	€80.31
4 mm	€70.15
5	€70.15

Lincoln Protig NGS 30 EB C5B-S TIG Torch - 5M

Supplier stock

Lincoln Electric

Reference: W000278398-2

Lincoln Protig NGS 30 EB C5B-S TIG Torch - 5M

€360.91

295,83 € tax excl.

or 4 x 90,23 €

Free delivery

2-year warranty

NGS 30 EB C5B-S-5M Torch

Length 5 m
Duty cycle: 200 A @35% - 130 A @60%

This torch is supplied with:
1 long cap
1 ceramic nozzle Ø 12 mm
1 tungsten electrode Ø 2.4 mm

Lincoln - Cap for TIG torch PROTIG NG S 10W

Supplier stock

Weldline

Reference: Capuchon-PROTIG

Lincoln - Cap for TIG torch PROTIG NG S 10W

€14.59

11,96 € tax excl.

Fast delivery

2-year warranty

3 cap options for your TIG torch LINCOLN PROTIG NG S 10 W

Short
Medium
Long

Combinations	Price	quantity
Short	€7.22
Medium	€10.07
Long	€14.59

Special MIG MAG multi-purpose pliers Original Fix

In stock

Soudure pro

Reference: ORIGINAL FIX

Special MIG MAG multi-purpose pliers Original Fix

(11 reviews)

€29.49

24,17 € tax excl.

Fast delivery

2-year warranty

Special pliers for MIG/MAG torch

Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Helps unscrew the contact tip or gas nozzle from the torch.
Suitable for gas nozzles Ø 12 to 15 mm.

Welding electrodes for Corten type steels

Supplier stock

GEKA

Reference: TEMPO B W2

Welding electrodes for Corten type steels

(12 reviews)

€43.70

35,82 € tax excl.

Fast delivery

2-year warranty

Basic electrodes designed for welding low-alloy steels of the Corten type and all steels resistant to atmospheric corrosion (marine, industrial, rural).
Pleasant fusion, easy slag removal. Fine bead appearance.
Standard AWS A 5. - E 8018 W2 H4
Standard ISO 2560-A - E 46 Z(NICrCu) B42 H5

The Ø 2.5 mm electrode pack contains 4.5 kg, i.e. 215 pieces. Length 350 mm - Welding current from 80 to 110 A
The Ø 3.2 mm electrode pack contains 5 kg, i.e. 143 pieces. Length 350 mm - Welding current from 130 to 150 A

For better arc starting, it is recommended to bake the electrodes at 150°C before use

Combinations	Price	quantity
2.5 mm	€43.70
3.2 mm	€43.92

Replacement torch for HELVI FOX 165 welding machine

Save 20%

In stock

HELVI

Reference: 23000132

Replacement torch for HELVI FOX 165 welding machine

(1 review)

€49.61

€62.01

40,66 € tax excl.

Fast delivery

2-year warranty

Replacement torch for Helvi FOX 165 welding machine

Length 2.7m

TIG welding torch SR20 DB 35/50 Amphenol 7-pin connector

Supplier stock

BINZEL

Reference: SR20DB

TIG welding torch SR20 DB 35/50 Amphenol 7-pin connector

(3 reviews)

€203.13

166,50 € tax excl.

or 3 x 67,71 €

Free delivery

2-year warranty

Binzel brand TIG GRIP SR 20 DB torch (double button) 35/50 Amphenol 7-pin connector

Length: 4 or 8 m
WATER cooling.
Capacity: - direct current (DC): 220 A - alternating current (AC): 200 A
Duty cycle: 100%
Usable tungsten electrode: Ø 0.5 to 3.2 mm

TIG welding torch SR20 DB 35/50 Amphenol 7-pin connector

Combinations	Price	quantity
4 M	€203.13
8 M	€294.84

TIG welding torch SR17 DB connector 35/50 amphenol 7-pin

In stock

BINZEL

Reference: SR17DB-AMPH

TIG welding torch SR17 DB connector 35/50 amphenol 7-pin

(1 review)

€198.76

162,92 € tax excl.

or 3 x 66,25 €

Free delivery

2-year warranty

Binzel TIG GRIP SR 17 DB torch (double button), 35/50 connector, Amphenol 7-pin

Length 4 m and 8 m
Air-cooled.
Capacity: - direct current (DC): 140 A - alternating current (AC): 125 A
Duty cycle: 60 %
Usable tungsten electrode: Ø 0.5 to 2.4 mm

Combinations	Price	quantity
4 M	€138.26
8 M	€198.76

DECA

Reference: 010241

Steel wire guide liner for DECA MIG torch

(3 reviews)

€8.09

6,63 € tax excl.

Fast delivery

2-year warranty

Aluminium wire guide liner. Wire Ø 0.6/1 mm for steel wire - stainless steel wire and flux-cored wire (gasless)

Length 3 m

This liner fits DECA welding machines
MIGA 215
D-MIG 230 AC - Starflux 130 AC
D-MIG 235 - 265 - 350 - 380 with fixed torch

Lever electrode holder PERFECTA 3 - 250A

In stock

Sacit

Reference: PERFECTA 3

Lever electrode holder PERFECTA 3 - 250A

(1 review)

€27.19

22,29 € tax excl.

Fast delivery

2-year warranty

Lever electrode holder 250 Amperes
Duty cycle 250 A@35% - 200 A@ 60%
Electrode fixing in 9 positions
Compatible with rutile, basic or cellulosic electrodes Ø 1.6 to 4 mm
Maximum cable cross-section: 35 mm²
Cable clamped by hexagonal nuts
Die-cast brass lever
Electrode fixing in 9 positions
Compliant with standard EN-60-974-11

DBP | Angled acid-resistant brush for stainless steel passivation

dbp

Reference: MATTRA0232

DBP | Angled acid-resistant brush for stainless steel passivation

(2 reviews)

€11.08

9,08 € tax excl.

Fast delivery

2-year warranty

This brush is used for applying stainless steel cleaning products.
Plastic handle, acid-resistant.

Brush width 30 mm
Handle length 30 cm

In stock

Weldline

Reference: SRAYMIG SVB W000011092

WELDLINE - SPRAYMIG SVB silicone-free anti-spatter W000011092

(5 reviews)

€6.92

5,67 € tax excl.

Fast delivery

2-year warranty

Silicone-free anti-spatter spray for protection of contact tips and gas nozzles.
Volume 400 ml
For use on cold parts, compatible with paint.

TIG filler rods - CORTEN steel 5 kg case

In stock

Soudure pro

Reference: CORTEN/5kg

TIG filler rods - CORTEN steel 5 kg case

(1 review)

€85.16

69,80 € tax excl.

Fast delivery

2-year warranty

CORTEN steel TIG filler rods type 80SG
Standard AWS A 5.28 ER 80S-G
Standard ISO 16834-A G Z Mn3N1Cu

Diameter 1.6, 2 and 2.4 mm

Rod length 100 cm.
5 kg case

Combinations	Price	quantity
1.6 mm	€85.16
2 mm	€83.57
2.4 mm	€95.77

GEKA

Reference: LOTUS

Geka|Lotus - RUTILE Electrodes for steel welding 5kg pack

(13 reviews)

€30.30

24,83 € tax excl.

Fast delivery

2-year warranty

Rutile electrodes for welding steels
Supplied in cardboard case

AWS Standard A 5.1 - E 6013
ISO Standard 2560-A - E 42 0 RC11

The Ø 2.5 mm electrode pack contains 5 kg, i.e. 270 pieces. Length 350 mm
The Ø 3.2 mm electrode pack contains 5 kg, i.e. 170 pieces. Length 350 mm
The Ø 4 mm electrode pack contains 5 kg, i.e. 115 pieces. Length 350 mm
The Ø 5 mm electrode pack contains 5 kg, i.e. 70 pieces. Length 350 mm

Combinations	Price	quantity
2.5 mm	€30.30
3.2 mm	€28.67
4 mm	€29.28
5	€30.29

TIG filler metal rods - CORTEN steel case 950 g

Supplier stock

GEKA

Reference: TIGCORTEN

TIG filler metal rods - CORTEN steel case 950 g

(5 reviews)

€24.91

20,42 € tax excl.

Fast delivery

2-year warranty

CORTEN steel TIG filler rods type 80SG
Standard AWS A 5.28 ER 80S-G
Standard ISO 16834-A G Z Mn3N1Cu

Diameter 1.6, 2 and 2.4 mm

Rod length 33 / 35 cm.
Case of 950 g

Combinations	Price	quantity
1.6 mm	€24.91
2 mm	€24.71
2.4 mm	€26.84

In stock

Gys

Reference: 044654

Consumable kit for TIG torch SR9

(4 reviews)

€17.08

14,00 € tax excl.

Fast delivery

2-year warranty

This consumable kit for TIG torch type SR9 includes:

- 2 nozzles (N4 and N6)
- 1 nozzle and collet body Ø1.6
- 1 collet Ø1.6
- 2 caps (1 short + 1 long)
- Universal tungsten electrode WR2 AC/DC Ø1.6 for welding steel, stainless steel and aluminium.

In stock

Gys

Reference: 044685

Consumable kit for TIG torch SR20

(1 review)

€22.36

18,33 € tax excl.

Fast delivery

2-year warranty

This kit includes:

- 2 nozzles (N4 and N6)
- 2 collet body and nozzle holders (Ø1.6 + /2.4)
- 2 collets (Ø1.6+Ø 2.4)
- 2 back caps (1 short + 1 long)
- 2 universal WR2 AC/DC tungsten electrodes (Ø1.6 + Ø2.4) for welding steels, stainless steel, and aluminium.

Supplier stock

Lincoln Electric

Reference: WTT2-9

TIG Flex-Head Torch Lincoln WTT2-9

(1 review)

€99.64

81,67 € tax excl.

Fast delivery

2-year warranty

The TIG WTT2-9-RL-C5B flex-head torches offer the best performance for optimised welder comfort.
Designed to meet the challenges of a variety of applications on maintenance, manufacturing or construction sites. High-quality components and a well-thought-out modern design ensure efficient and comfortable welding for the operator.
The torches are manufactured to high quality standards. Consumables are compatible with international standards.

Duty cycle 110A@35% - 80A@60%
Usable electrode diameter: from 1 to 1.6 mm.

Supplied with: one blue lanthanated tungsten electrode Ø 1.6 mm + ceramic nozzle + 1 long back cap

Combinations	Price	quantity
4 M	€99.64
8 M	€131.76

In stock

GEKA

Reference: ELOX R316L

GEKA | ELOX - Stainless Steel Electrodes 316L Case of 3 / 4.5 kg

(6 reviews)

€91.50

75,00 € tax excl.

Fast delivery

2-year warranty

Rutile electrodes for welding 18/8/3 type stainless steel.
Supplied in a plastic case.
Standard AWS A 5.4 - E 316-16
Standard ISO 3581-A - E 19 12 3 L R 12

The Ø 2 mm electrode pack contains 3 kg, i.e. 315 pieces, length 250 mm
The Ø 2.5 mm electrode pack contains 3 kg, i.e. 165 pieces, length 300 mm
The Ø 3.2 mm electrode pack contains 4.5 kg, i.e. 130 pieces. Length 350 mm

Combinations	Price	quantity
2 mm	€101.47
2.5 mm	€91.50
3.2 mm	€96.38

2 Ceramic gas nozzles for TIG torch PROTIG 10 and 10W

Supplier stock

Weldline

Reference: W0306

2 Ceramic gas nozzles for TIG torch PROTIG 10 and 10W

€13.02

10,67 € tax excl.

Fast delivery

2-year warranty

Pack of 2 ceramic nozzles for TIG torch PROTIG 10 and 10 W
This PROTIG 10 torch is found on welding machines from Lincoln or Safpro brands

Nozzles with diameter 10 and 12 are short while the nozzle with diameter 9.6 is long

Combinations	Price	quantity
8	€13.02
10	€13.02
Long 9.6	€9.97
12	€13.02
6.4	€9.97

Seat for electrode holder of PROTIG 10 or 10 W torch

Supplier stock

Weldline

Reference: W000306205

Seat for electrode holder of PROTIG 10 or 10 W torch

€11.19

9,17 € tax excl.

Fast delivery

2-year warranty

This seat is required for use with any size of electrode holder for the PROTIG 10 and 10 W torch model.
This torch is found on Lincoln and SAFPRO brand welding machines.

Electrode holder for TIG torch PROTIG NS S 10 and 10W

Supplier stock

Weldline

Reference: W000306

Electrode holder for TIG torch PROTIG NS S 10 and 10W

(1 review)

€5.65

4,63 € tax excl.

Fast delivery

2-year warranty

Pack of 2 electrode holder collets for TIG torch PROTIG 10 and 10 W
This PROTIG 10 torch is found on welding machines from Lincoln or Safpro brands

Combinations	Price	quantity
1 mm	€5.65
1.6 mm	€7.32
2 mm	€7.06
2.4 mm	€7.06
3.2 mm	€5.59

Cap for TIG torch type SR17 - SR18 or SR 26

In stock

Trafimet

Reference: Capuchon17

Cap for TIG torch type SR17 - SR18 or SR 26

(8 reviews)

€2.23

1,83 € tax excl.

Fast delivery

2-year warranty

3 cap options for your TIG torch of type SR 17 - SR 18 or SR26

Short
Medium
Long

Combinations	Price	quantity
Short	€1.83
Medium	€2.00
Long	€2.23

In stock

Trafimet

Reference: Capuchon9

Cap for TIG torch type SR9 or SR 20

(3 reviews)

€2.23

1,83 € tax excl.

Fast delivery

2-year warranty

3 cap options for your TIG torch type SR 9 or SR20

Short
Medium
Long

Combinations	Price	quantity
Short	€2.14
Medium	€1.74
Long	€2.23

In stock

Telwin

Reference: 804139

NEUTRALISE IT 1L can

(1 review)

€26.94

22,08 € tax excl.

Fast delivery

2-year warranty

Stainless steel weld cleaning liquid for small weld beads
1 L can.
Applied with a suitable brush. Reference 981863

Steel wire for welding galvanized sheet spool Ø 200 mm weight 5 kg

GEKA

Reference: FIL-GALV

Steel wire for welding galvanized sheet spool Ø 200 mm weight 5 kg

(5 reviews)

€51.85

42,50 € tax excl.

Fast delivery

2-year warranty

Welding wire for carbon, zinc-coated, electro-zinc-coated or galvanized steels.
Applications:
General-purpose construction. Metal joinery. Construction and maintenance of agricultural equipment.

Spool Ø 200 mm, weight 5 kg

2 wire sizes are available: 0.8 and 1 mm

Standards: AWS A5.18: ER70S-2

This wire requires argon + CO² 12/15% shielding gas for use

This wire is designed to weld on a sheet to be galvanized or an already galvanized sheet.
In the second case, the galvanization is burned off and will need to be renewed on the weld bead by cold galvanization.

Welding fumes from galvanized steel are particularly harmful and it is strongly recommended to wear respiratory protection during this welding operation.
In order to be exposed to fewer such fumes during the welding process, you can beforehand grind the metal bare at the weld bead location to remove the galvanization.
Even in this second case, respiratory protection is advised.

Combinations	Price	quantity
0.8 mm	€51.85
1 mm	€51.85

In stock

Weldline

Reference: CERASKIN

WELDLINE - Anti-spatter spray CERASKIN W000277679

(4 reviews)

€32.54

26,67 € tax excl.

Fast delivery

2-year warranty

Ceramic-based anti-spatter spray with very fast drying that protects welding equipment and wear parts against welding spatter.

Extremely fast drying (a few seconds)
Long-lasting hold and resistance of the protective film

Ceraskin guarantees 8 hours of continuous welding work without needing to reapply the product

In stock

Weldline

Reference: NETMIG

NET MIG - POT 300G

(20 reviews)

€11.69

9,58 € tax excl.

Fast delivery

2-year warranty

NETMIG is a paste that prevents welding spatter from adhering to nozzles or contact tips.
Does not clog orifices or threads
Does not cause porosity
Solvent-free, silicone-free and odourless.

Compatible with all MIG-MAG torches except fume extraction torches.

Volume 300g

Supplier stock

Lincoln Electric

Reference: W000278403-2

Lincoln TIG Torch Protig NGS 10W

€386.34

316,67 € tax excl.

or 4 x 96,59 €

Free delivery

2-year warranty

PROTIG NGS 10W C5B-S TIG torch length 8 m
Duty cycle: 220 A @100%.
Water cooling - Minimum water flow: 1 l/min - Water pressure 3.3 Bar - Maximum water inlet temperature 45°C
Gas flow: Min 7 l/min - Max 13 l/min

This torch is supplied with:
1 long cap
1 nozzle Ø 12 mm
1 tungsten electrode Ø 2.4 mm

Combinations	Price	quantity
5 M	€386.34
8 M	€447.34

In stock

Lincoln Electric

Reference: WTT2-17RL

WELDLINE WTT2-17 TIG flex head torch

€127.09

104,17 € tax excl.

Free delivery

2-year warranty

The TIG WTT2-17-RL-C5B flex head torches offer the best performance for optimized welder comfort.
Designed to meet the challenges of a variety of applications on maintenance, manufacturing or construction sites. High-quality components, a studied and modern design — the guarantee of efficient and comfortable welding for the operator.
The torches are manufactured to high quality standards. Consumables are compatible with the international standard.

Duty cycle 135A@35% - 100A@60%
Usable electrode diameter: 1 to 3.2 mm.

Delivered with: a Ø 2 mm blue lanthanum tungsten electrode + GR 6 ceramic nozzle + 1 long cap

Combinations	Price	quantity
4 M	€127.09
8 M	€187.06

swan neck for TW 160 and TW 180 Telwin torch

Save 10%

In stock

Telwin

Reference: 722078

swan neck for TW 160 and TW 180 Telwin torch

(4 reviews)

€9.97

€11.08

8,17 € tax excl.

Fast delivery

2-year warranty

Gooseneck for MIG-MAG torch reference TW 160 or TW 180 fitted on Telwin brand welders models

Bimax 120- 140- 152 Bimax 4.165 Turbo - Bimax 162 Turbo
Maxima 160 - Maxima 190
Telmig 170/1 - Telmig 180/2

VESTALETTE screw-lock electrode holder 250 A

Supplier stock

SOUDO METAL

Reference: 110.00

VESTALETTE screw-lock electrode holder 250 A

(7 reviews)

€23.28

19,08 € tax excl.

Fast delivery

2-year warranty

Screw-lock electrode holder 250 Amperes
Duty cycle 250A @ 35% - 200A @ 60%
Compatible with rutile, basic or cellulosic electrodes Ø 1.6 to 4 mm
Maximum cable cross-section: 35 mm²
Electrode locking by screw
Left-hand thread
Full insulation
Compliant with standard EN-60-974-11

In stock

SOUDO METAL

Reference: 130.00

Lever electrode holder 300 A COBRA

€32.94

27,00 € tax excl.

Fast delivery

2-year warranty

Lever electrode holder 300 Amperes
Duty cycle 300 A@35% - 250 A@ 60%
Compatible with rutile, basic or cellulosic electrodes Ø 1.6 to 4 mm
Electrode locking by brass jaws
Head and handle in polyester resin reinforced with fiberglass
Maximum cable cross-section: 35 mm²
Cable fastening by hexagon socket screws
Compliant with standard EN-60-974-11

Supplier stock

Telwin

Reference: 804028

Marking kit

€89.46

73,33 € tax excl.

Fast delivery

2-year warranty

Marking kit for Cleantech 200 Telwin

In stock

Telwin

Reference: 722305

Swan neck for MT 15 Telwin torch

(2 reviews)

€17.24

14,13 € tax excl.

Fast delivery

2-year warranty

Swan neck for MIG-MAG torch reference MT 15 found on Telwin brand welding machines, models

Technomig 180 Euro - Technomig 210 and 215
Electromig 220 - Mastermig 220/2

HELVI

Reference: 23000133

Replacement torch for Fox 160 Helvi MIG welder

(1 review)

€50.42

41,33 € tax excl.

Fast delivery

2-year warranty

Replacement torch for Fox 160 Helvi MIG welder

Length 2m
Sold without contact tip or contact tube.

In stock

GEKA

Reference: 010830

GEKA |UHSS solid wire Ø 0.8 mm for bodywork welding weight 5 kg

(5 reviews)

€80.31

65,83 € tax excl.

Fast delivery

2-year warranty

UHSS* steel wire.
Wire spool Ø 200 mm. Weight 5 KG - Wire Ø: 0.8 mm

UHSS (Ultra High Strength Steel) wire. UHSS steel is particularly used in bodywork. This material makes it possible to reduce thickness and weight while preserving extreme robustness and collision resistance of components.

Classification of this wire: AWS/ASME SFA-5.28: ER 120 S-G
Standard ISO 16834 W Mn4Ni2.5CrMo

Pure Argon shielding gas

*Ultra High Strength

In stock

Trafimet

Reference: GM07

Teflon Liner for aluminium wire

(8 reviews)

€29.93

24,53 € tax excl.

Fast delivery

2-year warranty

Trafimet Teflon wire liner with copper terminal for aluminium wire
2 lengths available: 3 metres and 4 metres

2 liner diameters available:

For aluminium wire Ø 0.6 to 0.9 mm reference GM0710 (blue liner) length 3 metres
For aluminium wire Ø 1 and 1.2 mm reference GM0715 length 3 metres (red liner) and GM0716 length 4 metres

Combinations	Price	quantity
GM0710	€29.93
GM0715	€29.93
GM0716	€34.27

Save 20%

In stock

Gys

Reference: 045415

Tungsten electrode sharpener WAG 40

€969.90

€1,212.38

795,00 € tax excl.

or 4 x 242,48 €

Free delivery

2-year warranty

The quality of a TIG weld depends on the proper sharpening of the tungsten electrode. The WAG 40 is the portable solution for optimal preparation.

This sharpener allows:
Sharpening of 6 electrode diameters (Ø 1 to 4 mm).
Angle adjustment for all situations: angular adjustment from 15 to 180°.

It features an integrated grinding particle filter to protect the operator from dust.

Included upon delivery:
Adapter for electrode Ø 1.6, 2.4 and 3.2 mm.
1 dust filter
1 diamond disc Ø 40

In stock

Trafimet

Reference: MC0026

2 highly conical gas nozzles diameter 12 mm - Length 84 mm Trafimet

€13.70

11,23 € tax excl.

Fast delivery

2-year warranty

2 gas nozzles Ø 12 mm
Length 84 mm.

This nozzle fits on the end of your Trafimet Ergoplus 36 MIG torch.
Its role is to direct the gas flow toward the weld and the melting wire.

Suitable for welders equipped with a 320 A @ 60% torch

Supplier stock

Trafimet

Reference: MC0527P

2 conical gas nozzles diameter 16 mm - Length 84 mm Trafimet

(1 review)

€12.61

10,34 € tax excl.

Fast delivery

2-year warranty

2 gas nozzles Ø 16mm
Length 84 mm.

This nozzle fits onto the end of your MIG 350 A torch
Its role is to direct the gas flow towards the weld and the molten wire.

Suitable for machines equipped with a 320 A @ 60% torch

TIG filler metal rods - STEEL SG2 5 kg sleeve

In stock

GEKA

Reference: TIGAC/5kg

TIG filler metal rods - STEEL SG2 5 kg sleeve

(40 reviews)

€42.09

34,50 € tax excl.

Fast delivery

2-year warranty

STEEL filler metal rods type SG 2 for TIG welding
Standard AWS A 5.18 ER 70S-6

Diameter 1.2 - 1.6 - 2 and 2.4 mm.

Rod length 100 cm.
5 kg sleeve

Combinations	Price	quantity
1.2 mm	€42.09

In stock

Gys

Reference: 041523

Nail welding nozzle for 150A torch

€23.13

18,96 € tax excl.

Fast delivery

2-year warranty

1 nail welding nozzle for 150 A torch

This nozzle fits onto the end of your torch as a replacement for the gas nozzle.
It allows you to weld studs for dent pulling on car bodywork.

TIG welding torch SR26 DB for Gys machine Amphenol 7-pin connector

BINZEL

Reference: SR26DB-A

TIG welding torch SR26 DB for Gys machine Amphenol 7-pin connector

(4 reviews)

€223.66

183,33 € tax excl.

or 3 x 74,55 €

Free delivery

2-year warranty

Binzel brand TIG GRIP SR 26 DB torch (double button).

Length 4 and 8 M.
Air cooling.
Capacity: - in direct current (DC): 180 A - in alternating current (AC): 130 A
Duty cycle: 35%
Usable tungsten electrode: Ø 0.5 to 4.0 mm

This torch fits notably on Gys TIG 220DC FV - TIG 300DC - TIG220 AC/DC machines

Combinations	Price	quantity
4 M	€223.66
8 M	€252.14

In stock

Telwin

Reference: BRUSH IT

BRUSH IT 1L or 5L container

(4 reviews)

€27.35

22,42 € tax excl.

Fast delivery

2-year warranty

Stainless steel weld cleaning liquid for small weld beads
1 L or 5 L container.
Applied with a suitable brush.

Combinations	Price	quantity
1 L	€27.35
5 L	€90.49

In stock

Trafimet

Reference: GM0720

Carbon liner Ø 1 - 1.2 mm Trafimet for MIG torch aluminium welding

€31.51

25,83 € tax excl.

Fast delivery

2-year warranty

Teflon / 20% carbon wire guide liner for aluminium wire Ø 1 - 1.2 mm

Designed for Trafimet Ergoplus 36 and 36 M8 torches

2 lengths available: 3 and 4 m

Combinations	Price	quantity
3 M	€31.51
4 M	€35.38

In stock

Trafimet

Reference: MC0023P

3 gas nozzles diameter 15 mm - Length 55 mm Trafimet

(9 reviews)

€15.45

12,66 € tax excl.

Fast delivery

2-year warranty

3 gas nozzles Ø 15 mm
Length 55mm.

This nozzle fits onto the end of your Trafimet Ergoplus 25 - 25 Flex MIG torch
Its role is to direct the gas flow towards the weld and the melting wire.

Suitable for welders equipped with a 220 A @ 60% torch

Jelt

Reference: 5418

BIO Cutting Oil + Jelt

(4 reviews)

€14.63

11,99 € tax excl.

Fast delivery

2-year warranty

Cutting fluid, lubricant and coolant, compatible with all metals.
Adheres strongly to the tool and allows for high working speeds.

Prevents wear, corrosion and ensures better performance, reduces friction and facilitates machining operations.
Resistant to oxidation and high temperatures.
Produces virtually no fumes, approved for incidental food contact.

Jelt

Reference: 5090

Jelt Anti-Spatter Welding Spray

(72 reviews)

€7.06

5,79 € tax excl.

Fast delivery

2-year warranty

The active ingredient of the SOUDURE ANTI-GRATTONS is effective over time and benefits from high anti-adhesion properties that prevent the adhesion of metal spatter and weld spatters on welding torch nozzles or any surfaces near the work area. Formulated without chlorinated or petroleum solvents, the SOUDURE ANTI-GRATTONS is neither toxic nor irritating.

Thanks to its specific water-based formulation, the SOUDURE ANTI-GRATTONS is non-flammable, releases no unpleasant odour and generates neither smoke nor dangerous vapours for the user during welding operations. The SOUDURE ANTI-GRATTONS is 92% biodegradable.

The SOUDURE ANTI-GRATTONS rinses off very easily with water and contains corrosion inhibitors. Silicone-free, it is compatible with post-finishing operations and can be used on surfaces that are to be painted, bonded or varnished.

The SOUDURE ANTI-GRATTONS is particularly recommended when you want to avoid any trace of grease on metal surfaces. It also facilitates the demoulding of parts made of polyurethane, polyester, epoxy, various plastics or rubber moulded by injection, compression or casting.

SOUDURE ANTI GRATTONS Silicone-free water-based anti-adhesion spray

MAIN CHARACTERISTICS
• Water-based formula without chlorinated or petroleum solvents
• Prevents the adhesion of molten metal spatter: welding spatter.
• Non-flammable
• Easy removal of welding spatter by simple brushing
• Transparent film in the form of micro-droplets
• Long-lasting protection
• Releases no vapour or smoke
• No unpleasant odour • Mould release action
• Contains a corrosion inhibitor
• Very easy removal of the SOUDURE ANTI GRATTONS film
• Silicone-free to facilitate post-finishing operations

FIELDS OF APPLICATION
• Protection of the welding station environment
• Protection of parts before welding
• Nozzle, soldering iron tip
• Welding robots
• Steel or aluminium moulds • Mould release agent for plastic injection moulding

Jelt

Reference: 5501

Detect fuites Jelt

(3 reviews)

€8.04

6,59 € tax excl.

Fast delivery

2-year warranty

The DETECT FUITES is a water-based product containing an antifreeze additive, anti-corrosion additives and surfactants that give it very high efficiency in immediately locating gas leaks on all circuits. It can be used with all types of gas (compressed air, hydrocarbons, CO2, nitrogen… except pressurised oxygen)
The DETECT FUITES works by forming air bubbles around the gas leak. The DETECT FUITES is frost-resistant and can be used down to -20°C.
The DETECT FUITES is over 80% biodegradable.
Safe to use on pneumatic circuits, fittings, valves, taps, safety valves or cylinders.

MAIN FEATURES
• Immediately visible detection
• Instant bubble or foam formation
• Neutral towards substrates
• Non-flammable
• Over 99% biodegradable
• Leaves no residue
• Contains anti-corrosion agents
• Formulated with an antifreeze agent -20°C
• Do not use on pressurised oxygen — use DETECTO FUITES Ref.: 005511
• Aerosol usable in all positions
FIELDS OF APPLICATION
• Suitable for detecting leaks of:
• Compressed air, CO², Nitrogen
• Butane, Propane
• Gas used in air conditioning systems
• Refrigerant gas
• Leak detection on: • Pipework, • Valves, • Fittings, • Gate valves, • Safety valves, • Gas cylinders

Net capacity 400 ml - 650 ml aerosol can.
Made in France.

Jelt

Reference: Jelt56

Detect fissures Jelt

(1 review)

€12.46

10,21 € tax excl.

Fast delivery

2-year warranty

3 products for complementary use:

PENETRANT:
Red dye used to highlight small defects that may cause leaks.

DEVELOPER:
White powder product. It is used in conjunction with the PENETRANT and highlights small defects that may cause leaks.
Its white powder draws out by capillary action the red penetrant embedded in the crack from a thickness of 30 microns.
Easy to apply, non-destructive testing.

CLEANER:
Surface cleaner to be used before and after dye penetrant testing.
Penetrates into the smallest cracks and removes excess PENETRANT.

Combinations	Price	quantity
Developer	€12.46
Penetrant	€12.46
Cleaner	€12.46

Supplier stock

Gys

Reference: 041486

Spool Gun Torch 150 A 4M Gys

€432.09

354,17 € tax excl.

or 4 x 108,02 €

Free delivery

2-year warranty

Spool-Gun torch for Ø 100 mm wire spool, length 4 M.
Equipped with a Ø 0.8 mm contact tip M6 thread.

Duty cycle 150 A @ 60%

Compatible with Gys welding machines:

M1 and T1 Gys auto - T1 Gys auto DV - M3 and T3 Gys auto - T3 Gys auto DV - AUTOPULSE 320-T3

5 gas nozzles diameter 15 mm Lincoln for torch LGS and LGP

In stock

Lincoln Electric

Reference: W000010790

5 gas nozzles diameter 15 mm Lincoln for torch LGS and LGP

(8 reviews)

€26.02

21,33 € tax excl.

Fast delivery

2-year warranty

5 gas nozzles designed for Lincoln torch LGS 250 G - LGP 250 G - LGP 250 G FX - LG 250 G-E

DBP | Round acid-resistant brush for stainless steel passivation

Lincoln Electric

Reference: W000267116

DBP | Round acid-resistant brush for stainless steel passivation

(1 review)

€6.87

5,63 € tax excl.

Fast delivery

2-year warranty

This brush is used for applying stainless steel cleaning products.
Plastic handle, acid-resistant.

Two diameters available: 6 and 8 mm

Combinations	Price	quantity
8	€8.14
11	€6.87
21	€11.69

In stock

Trafimet

Reference: GM05

Trafimet wire guide liner for MIG welding torch steel length 3 m

(7 reviews)

€6.05

4,96 € tax excl.

Fast delivery

2-year warranty

Steel or stainless steel wire guide liner:

3 liner diameters available:

Inner diameter 1.4 mm and outer Ø of the liner 4.6 mm for wire Ø 0.6 to 0.9 mm.
Inner diameter 2 mm and outer Ø of the liner 4.6 mm for wire Ø 1 and 1.2 mm.
Inner diameter 2.4 mm and outer Ø of the liner 4.7 mm for wire Ø 1.2 and 1.6 mm.

Length 3 m

Combinations	Price	quantity
0.6 - 0.9 mm	€6.05
1 - 1.2 mm	€6.05
1.2 - 1.6 mm	€6.05

In stock

Trafimet

Reference: MC0018

2 gas nozzles diameter 12 mm Trafimet

(76 reviews)

€6.20

5,08 € tax excl.

Fast delivery

2-year warranty

2 gas nozzles Ø 12 mm
Length 53 mm.

This nozzle fits onto the end of your MIG torch
Its role is to direct the gas flow towards the weld and the molten wire.

Suitable for machines equipped with a 150 A @ 60% torch

In stock

Trafimet

Reference: MF00

Swan neck for MIG Ergoplus Trafimet torch

(5 reviews)

€13.05

10,70 € tax excl.

Fast delivery

2-year warranty

Swan neck for Trafimet MIG-MAG torch, Ergoplus

Reference MF0032 is intended for the Ergoplus 15
Reference MF0033 is intended for the Ergoplus 25
Reference MF0034 is intended for the Ergoplus 36 and Ergoplus 36 M8

Combinations	Price	quantity
MF0032	€13.05
MF0034	€39.16
MF0033	€22.27

In stock

Gys

Reference: 044678

TIG torch SR17/18/26 consumable kit

(12 reviews)

€19.31

15,83 € tax excl.

Fast delivery

2-year warranty

This kit includes:

- 2 nozzles (N5 and N7)
- 2 collet body and nozzle holders (Ø1.6 + Ø2/2.4)
- 2 collets (Ø1.6+Ø2.4)
- 2 back caps (1 short + 1 long)
- 2 universal tungsten electrodes WR2 AC/DC (Ø1.6 + Ø2.4) for welding steel, stainless steel and aluminium.

It is particularly useful for the Gys machines listed below and all those fitted with a torch reference SR 17 -18 and 26
TIG 160 DC
TIG 168 DC HF
TIG 200 DC HF FV

1 spot welding nozzle Ø 16 for 150 A torch

In stock

Trafimet

Reference: MC0020

1 spot welding nozzle Ø 16 for 150 A torch

(15 reviews)

€6.81

5,58 € tax excl.

Fast delivery

2-year warranty

This spot welding nozzle fits onto the end of your MIG torch and guides you in your spot welding work by allowing you to see your welding spot, unlike a standard gas nozzle.
Very useful for bodywork or thin sheet metal work.

It is suitable for any torch brand with a duty cycle of 150A @ 60%

Length 61.5 mm
Diameter: 16 mm

In stock

Lincoln Electric

Reference: WTT2-26

TIG flex-head torch Lincoln WTT2-26

(2 reviews)

€141.31

115,83 € tax excl.

Free delivery

2-year warranty

The TIG WTT2-26-RL-C5B flex-head torches offer the best performance for optimised welder comfort.
Designed to meet the challenges of a variety of applications on maintenance, manufacturing or construction sites. High-quality components, a thoughtful and modern design ensure efficient and comfortable welding for the operator.
The torches are manufactured to high quality standards. Consumables are compatible with the international standard.

Duty cycle 180A@35% - 130A@60%
Usable electrode diameter: 1 to 4 mm.

Supplied with: one blue lanthanum tungsten electrode Ø 2.4 mm + GR 8 ceramic nozzle + 1 long back cap

Combinations	Price	quantity
4 M	€141.31
8 M	€228.75

In stock

Lincoln Electric

Reference: R-1019-125-1/08R

Adapter for Ø 200 spool Lincoln

(3 reviews)

€27.15

22,25 € tax excl.

Fast delivery

2-year warranty

This adapter allows the use of Ø200 wire spools on welding machines originally designed to accommodate 15 kg spools.

In stock

Gys

Reference: 041332

Special MIG MAG multi-purpose pliers Original Fix

(40 reviews)

€37.52

30,75 € tax excl.

Fast delivery

2-year warranty

Special pliers for MIG/MAG torch

Uses:
- To clean the inside of the nozzle
- Cut excess wire at the torch outlet before the welding operation
- Assists in unscrewing the contact tip or gas nozzle from the torch.
- Suitable for gas nozzles sz Ø 12 to 15 mm.

Flexible head torch for TIG welding SR26 Amphenol 7-pin connector Ø 35/50

BINZEL

Reference: SR 26 L

Flexible head torch for TIG welding SR26 Amphenol 7-pin connector Ø 35/50

(1 review)

€182.49

149,58 € tax excl.

or 3 x 60,83 €

Free delivery

2-year warranty

Binzel brand TIG SR26 L flexible head torch.

Length 4 or 8 M.
Air cooling.

Duty cycle:
DC = 240 A @60% - AC = 200 @ 60%

Usable tungsten electrode: diameter 0.5 to 4 mm.

Amphenol 7-pin connector Ø 35/50 mm

Light and easy to use, these torches offer ideal manoeuvrability for smooth welding. The moulded handle with GRIP provides optimal grip for achieving the perfect weld. The SR 26 torch is the most powerful in the air-cooled range.

Compatible with the following GYS TIG welding machines:
220DC FV - 300 DC - 220 AC/DC

Combinations	Price	quantity
4 M	€182.49
8 M	€284.47

In stock

SOUDO METAL

Reference: MIMTSM

Magnetic holder for MIG torch

(68 reviews)

€10.11

8,29 € tax excl.

Fast delivery

2-year warranty

Magnetic holder for MIG torch

In stock

SOUDO METAL

Reference: MITTSM

Magnetic holder for TIG torch

(47 reviews)

€10.11

8,29 € tax excl.

Fast delivery

2-year warranty

Magnetic holder for TIG torch

Adapter for 5 kg wire spool on 15 kg spool holder

In stock

Gys

Reference: 042889

Adapter for 5 kg wire spool on 15 kg spool holder

(13 reviews)

€4.58

3,75 € tax excl.

Fast delivery

2-year warranty

This adapter for a 5 kg welding wire spool is mounted on the shaft of your 15 kg spool holder so that your welding machine accepts Ø 200 mm spools.

It is used in particular with the Multi-Pearl 201-4 welding machine available on our website.

In stock

SOUDO METAL

Reference: STUBBY

STUBBY 400 A electrode holder

(12 reviews)

€38.64

31,67 € tax excl.

Fast delivery

2-year warranty

Screw-type electrode holder 400 Amperes - STUBBY®400
Duty cycle 300A @ 60% - 400 A@ 35%
Compatible with rutile, basic or cellulosic electrodes Ø 1.6 to 6.3 mm
Maximum cable cross-section: 50 mm²
Electrode locking by screw
Right-hand thread
Full insulation
Compliant with standard EN-60-974-11

TIG welding torch PROP 17 DB for Gys welding machine

In stock

BINZEL

Reference: 087521

TIG welding torch PROP 17 DB for Gys welding machine

(10 reviews)

€188.09

154,17 € tax excl.

or 3 x 62,70 €

Free delivery

2-year warranty

This GYS TIG PRO 17 brand torch features a EURO connector for connection to your welding machine.

Length 4 M.
Air cooling.
Duty cycle 100A@35%

This torch is compatible in particular with the 3 models of Gys Multipearl welding machines that we sell on our website.

Advantage of this Euro connection torch:

Compared to the TIG SR 17 torch with Gys valve reference W000278880 also compatible with the Gys Multipearl welding machine.

Post-gas with adjustable duration.
This parameter defines the time during which the gas continues to flow after the arc is extinguished. It protects the workpiece and the electrode from oxidation.

Arc fade-out with adjustable duration
This corresponds, at the end of welding, to the time required for the progressive reduction of the welding current until the arc stops. This function prevents cracks and end-of-weld craters. By default, this function is set to 0 sec.

2 gas nozzles diameter 9.5 mm for Helvi Fox 181 - 185 Flex-Line welder

In stock

Trafimet

Reference: MC0017

2 gas nozzles diameter 9.5 mm for Helvi Fox 181 - 185 Flex-Line welder

(3 reviews)

€8.89

7,29 € tax excl.

Fast delivery

2-year warranty

This nozzle fits onto the end of your MIG torch

Its role is to direct the gas flow towards the weld and the molten wire.
Its small diameter allows work in tight spaces where room is limited.

1 nozzle for gasless welding suitable for MB15 torch

In stock

Gys

Reference: 041868

1 nozzle for gasless welding suitable for MB15 torch

(18 reviews)

€7.02

5,75 € tax excl.

Fast delivery

2-year warranty

Special nozzle for gasless welding
Suitable for all MB15 type torches

In stock

Telwin

Reference: 990703

Adapter for wire spool Ø 100 mm TELWIN

(16 reviews)

€18.18

14,90 € tax excl.

Fast delivery

2-year warranty

This accessory allows the use of wire spools with a diameter of 100 mm (flux-cored, stainless steel or aluminum wire) on Telwin welding machine models when not supplied upon purchase.

This is particularly the case for the welding machine: Technomig 215 Dual Synergic.

In stock

HELVI

Reference: 33805104

Drive roller for aluminum MIG welding wire Ø 0.8-1 mm Helvi Fox welder

(2 reviews)

€13.16

10,79 € tax excl.

Fast delivery

2-year warranty

Drive roller for Helvi Mig-Mag welder for aluminum welding wire Ø 0.8 and 0.1 mm.

Also compatible with the following Helvi welder models:

Monomig 216 / 246 / 286 / 296
maximig 278 / 298
Unimig 298
Fox 185 Flex-Line
Tp 195

TIG filler metal rods - STEEL SG2 950 g pack

Supplier stock

GEKA

Reference: TIGAC

TIG filler metal rods - STEEL SG2 950 g pack

(80 reviews)

€11.74

9,62 € tax excl.

Fast delivery

2-year warranty

STEEL filler metal rods type SG 2 for TIG welding
Standard AWS A 5.18 ER 70S-6

Diameter 1.2 - 1.6 - 2 and 2.4 mm.

Rod length 100 cm.
950 g pack

Combinations	Price	quantity
1.2 mm	€11.74

Wire liner for MIG torch aluminium welding for Startwin and Decastar

In stock

Trafimet

Reference: 010370 - GM0600

Wire liner for MIG torch aluminium welding for Startwin and Decastar

(6 reviews)

€20.13

16,50 € tax excl.

Fast delivery

2-year warranty

Wire liner for aluminium wire Ø 0.8 mm, 1 mm.
Length 3 m
This liner fits DECA machines: Startwin 135 EVO and 165/1EVO - Startwin 180 E - Decastar 135 EVO - Decastar 150 E and Decastar 180E

DECA

Reference: CDC-DECA

Swan neck for Mig DECA torch

(9 reviews)

€13.93

11,42 € tax excl.

Fast delivery

2-year warranty

Swan neck for MIG-MAG DECA torch.
This product is a replacement accessory, it is not required when purchasing a new welder.
The swan neck reference must be selected according to your DECA welder reference:
Swan neck 010240 for DECA welders:
Decastar 130 and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Swan neck 010485 for DECA welders:
Decastar 150 E and 180 E
Decamig 180 E.
D-MIG 350 and 380 if your welder is fitted with a torch without EURO connection fixed to your welder.
Swan neck 010488 for DECA welders:
Decamig 2500
D-MIG 390 and 420S
JOB220 LAB -522-523
D-Mig 520T - 525T - 530S - 520SD -530SD - 525TD
MIGA 218- 220-225XL
Swan neck 010824 for DECA welder
MIGA 215

Combinations	Price	quantity
010240	€13.93
010485	€16.98
010488	€13.16
010824	€13.32

CuSi3 wire Ø 0.8 mm for MIG Brazing welding 800g spool

Soudure pro

Reference: 010845

CuSi3 wire Ø 0.8 mm for MIG Brazing welding 800g spool

(20 reviews)

€40.57

33,25 € tax excl.

Fast delivery

2-year warranty

CuSi3 solid wire
Wire spool Ø 100 mm - Weight 0.8 KG - Wire Ø: 0.8 mm
Welding wire suitable for HSS steel in MIG Brazing mode on electro-galvanized or galvanized steels or Cu-Si, Cu-Mn alloys.
Wire recommended for joining copper materials and various steel sheets.
Wire particularly used in the automotive industry (HSS steel, better wetting performance)
Wire classification: AWS A5.7: ERCuSi-A EN ISO 24373: S Cu 6560 (CuSi3Mn1) DIN 1733 SG-CuSi3
Shielding gas required during welding: Pure Argon

MIG torch for DECA welding machine gasless

Save 10%

In stock

DECA

Reference: 010464

MIG torch for DECA welding machine gasless

(12 reviews)

€76.25

€84.72

62,50 € tax excl.

Fast delivery

2-year warranty

MIG torch for DECA welding machine using flux-cored wire (gasless) suitable for the following machines:
DECASTAR 130 AC
STARFLUX 130 AC
D-MIG 230
Length 2 m
140 A @ 60%
This reference is a replacement accessory; it is not required when purchasing a new welding machine.

In stock

Sacit

Reference: PARVA2

Lever electrode holder PARVA 2 - 200A

(9 reviews)

€14.24

11,67 € tax excl.

Fast delivery

2-year warranty

Lever electrode holder 200 Amperes
Duty cycle 200A @35% - 150A @ 60%
Electrode fixing in 9 positions
Compatible with rutile, basic or cellulosic electrodes Ø 1.6 to 4 mm
Maximum cable cross-section: 25 mm²
Cable clamped by hexagonal nuts
Die-cast brass lever
Electrode fixing in 9 positions
Compliant with standard EN-60-974-11

Supplier stock

Lincoln Electric

Reference: K14037-1

LINCOLN COOL ARC 25 Cooling Unit

€608.99

499,17 € tax excl.

or 4 x 152,25 €

Free delivery

2-year warranty

Water cooling system for use with conventional and CV Powertec generators.
Equipped with an input cable with plug for 230V 50/60Hz power supply.
The quick connect/disconnect function makes changing MIG torches achievable in just a few seconds.
Coolant level inspection window.

Specifications

Equipped with an input cable with a 16A Schuko plug for 230V 50/60Hz power supply.
The quick connect/disconnect function makes changing MIG torches achievable in just a few seconds.
Tank capacity of 8.5 liters
Coolant level inspection window.
Vertical position
Lincoln Electric FREEZCOOL recommended coolant W000010167.

Dimensions: 748 X 238 X 148 mm
Weight: 17 kg
Capacity: 8.5 L
Warranty: 3 years

For use with Powertec® 365S, 425S, 505S and CV generators.

can operate independently, by plugging into a 16A power outlet.

In stock

SILICONI

Reference: MOLISIL

SILICONI | MOLISIL welding torch protection

(2 reviews)

€9.10

7,46 € tax excl.

Fast delivery

2-year warranty

MOLISIL is used as an anti-spatter product to protect the torch "nozzle" against droplet adhesion.
It is a very effective anti-spatter because it contains MOS2 and graphite in slightly higher quantities than a standard anti-spatter product
(oil-based).
MOLISIL can also be used as a lubricant to lubricate moving mechanical parts, prevent friction and reduce wear. It is used for high-temperature lubrication.

500 ml aerosol can

INSTRUCTIONS FOR USE

Clean and degrease the parts to be treated. Shake the aerosol vigorously until the ball moves, and during application, continue to shake the product occasionally to keep it homogeneous. Spray from a distance of 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent valve clogging.

SPECIFICATIONS

Base: Molybdenum disulphide and graphite
Propellant: Odourless denatured hydrocarbon.
Temperature resistance: 700°C
Appearance: Dry grey film
CFC-FREE CHLORINE-FREE

In stock

SILICONI

Reference: ZINCOSIL 430

SILICONI |ZINCOSIL 430 Cold galvanising gloss finish

€6.87

5,63 € tax excl.

Fast delivery

2-year warranty

ZINCONSIL 430 is used for cold galvanising on all metals. An aerosol with a high zinc content used particularly for touch-ups on welds, to restore or galvanise metal parts, to galvanise and protect bolts exposed to weathering for long periods, to restore grilles, gates, metal parts, containers and metal structures.
ZINCOSIL 430 is also an effective protector against corrosion from atmospheric agents, salt and moisture.

400 ml aerosol

PROPERTIES:
- Contains no chlorinated solvents,
- High zinc content,
- Fast drying,
- Does not drip,
- High coverage power,
- High corrosion resistance,
- Good resistance to atmospheric agents, washing agents, oxidising agents.
- Colour identical to galvanising,
- Durable protection
- The aerosol is fitted with an anti-drip diffuser; its use does not cause stains.

INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from becoming blocked.

SPECIFICATIONS
Base: Pure zinc 98% on synthetic backing
Pigment purity:>98%
Propellant: Denatured and odourless hydrocarbon
Appearance: Light grey colour
Dry film thickness: 20 to 40 µm (cross-coat)
Coverage capacity: high
Coverage rate: approx. 120 ml/m²
Temperature resistance: -50°C to +250°C (Metal powder resists up to 700°C)
Drying time: 5 to 10 minutes. Fast drying, does not drip.
Electrical conductivity: high
Abrasion resistance: Very high
Cross-cut: DIN 53151 - ISO 2409 = GTO/GT1
Oxidation resistance: Very good corrosion resistance

SILICONI

Reference: ZINCO 98

SILICONI |ZINCO 98 Cold galvanising dark grey colour

(2 reviews)

€8.09

6,63 € tax excl.

Fast delivery

2-year warranty

ZINCO 98 is an aerosol with a high zinc content, particularly suitable for welding touch-ups, for restoring or galvanising parts, and for galvanising and protecting nuts and bolts exposed to the weather over a long period.
This product creates a solid, resistant zinc film that protects steel materials from oxidation and can be painted over or left as is. It withstands salt spray for several hours.
The can is fitted with an anti-drip feature to prevent mess during use.

400 ml aerosol

INSTRUCTIONS FOR USE
Concentrated product
Shake the aerosol vigorously for at least 1 minute before use until the ball inside the aerosol is moving.
Never use without shaking the aerosol, otherwise the heavy concentrated zinc powder at the bottom settles inside the nozzle and blocks the valve, rendering the aerosol unusable

SPECIFICATIONS
Base: Pure zinc at 98%
Pigment purity:>98%
Appearance: Dark grey colour
Propellant: Odourless denatured hydrocarbon. Does not contain CFC
Dry film thickness: 30-60 microns
Coverage power: High
Coverage value: approx. 150ml/m2
Drying time: 5-10 minutes (fast drying, does not drip)
Electrical conductivity: High
Abrasion resistance: Very high
Oxidation resistance: Very good corrosion resistance
Temperature resistance: From -50°C to +500°C

In stock

SILICONI

Reference: DISTAC WELD

SILICONI | DISTAC WELD anti -spatter- welding spatters

(5 reviews)

€6.31

5,17 € tax excl.

Fast delivery

2-year warranty

DISTAC WELD is a silicone-free anti-spatter aerosol for metal.
It is used as an anti-spatter product for parts to be welded and also as protection for welding torch nozzles.
Thanks to its silicone-free composition, it allows subsequent treatments such as varnishing, galvanising, chrome plating, etc.
It makes welding easier and faster and helps prevent the formation of cracks and crevices.

500 ml aerosol

DIRECTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Spray the product around the parts to be welded at a distance of 25 cm.

SPECIFICATIONS
Base: Mixture of synthetic silicone-free anti-spatter agents
Propellant: Denatured and odourless hydrocarbon, flammable
Appearance: Clear oil
Temperature resistance: Up to 250°
Biodegradability: More than 85%
Film thickness: 2 to 3 microns
CONTAINS NO CFC OR DICHLOROMETHANE

In stock

SILICONI

Reference: CERAMSTAK

SILICONI | CERAMSTAK protection for welding torch

(2 reviews)

€16.78

13,75 € tax excl.

Fast delivery

2-year warranty

CERAM STAK is used to protect the torch from welding spatter.
Suitable for MIG/TIG torches, laser and plasma cutting, automatic welding machines.
Lubricant for high-temperature surfaces.

500 ml aerosol can

DESCRIPTION
CERAM STAK is an excellent anti-spatter product for protecting the torch tip from droplet adhesion. It lasts several hours (up to 8 hours) and has a superior anti-adhesive effect compared to standard silicone-free anti-spatter products, because it withstands high temperatures.
CERAM STAK is also an excellent lubricant. It deposits a thin dry film that improves action, prevents friction and reduces deformation. It can be used to lubricate work tables, furnaces, foundry slides, and whenever a high-temperature lubricant is needed.

INSTRUCTIONS FOR USE
Apply to the surface to be treated, which must first be thoroughly cleaned and degreased.
Shake the aerosol for at least one minute. During application, shake the aerosol regularly to keep the product homogeneous.
Spray the product from a distance of 15 cm to deposit a thin film.
After use, shake the aerosol for a few seconds to unblock the valve.
Shelf life is 2 years from the date of manufacture.

SPECIFICATIONS
Base: Microfine ceramic
Propellant: Denatured odourless hydrocarbon
Appearance: White dry film
Temperature resistance: 1500°C – at 200° the resins blend and become a nano-ceramic powder.
Drying time: 5 minutes
Contains no CFCs or silicone.

In stock

SILICONI

Reference: ANTITEK

SILICONI | ANTITEK anti-spatter welding

(2 reviews)

€6.61

5,42 € tax excl.

Fast delivery

2-year warranty

ANTITEK® is a new generation water-based anti-spatter aerosol, harmless to users. Thanks to its composition, silicone-free and with selected raw materials, ANTITEK® allows subsequent and successive surface treatments (painting, galvanizing or chrome treatment)
ANTITEK® is used to prevent the adhesion of impurities or spatter on welded elements or on the wear parts of welding torches.

500 ml aerosol

INSTRUCTIONS FOR USE
Spray around the end of the torch or on the metal to be welded or cut.
Do not spray on welding strips.
Shake before use.
Apply a first burst into the air when the aerosol is new.
Spray at a distance of 25-30 cm from the parts to create a film that will prevent spatter. Do not spray too long, or closer than 25 cm from the part.
Do not spray an excessive amount of product.
Degrease the welded part with detergent products before proceeding with surface treatments.
Use-by date: 10 months from the production date indicated on the aerosol.

CHARACTERISTICS
Base: Synthetic oil mixed with water base. SILICONE-FREE.
Propellant: Mixed, denatured, non-toxic, ecological gas.
Appearance: Clear liquid
Viscosity at 25°C: 20-50 cst
Odor: None
Anti-spatter performance: Very good

In stock

SILICONI

Reference: ALUSIL

SILICONI | ALUSIL Aluminum paint

(1 review)

€8.09

6,63 € tax excl.

Fast delivery

2-year warranty

ALUSIL is a spray product containing a high level of aluminum. It is suitable for welding touch-ups and for protecting aluminum parts from oxidation.
It forms a film that restores and protects aluminum surfaces.
It can be painted over or left without a final protective coating.

400 ml aerosol

INSTRUCTIONS FOR USE
Clean and degrease the parts to be treated. Shake the aerosol vigorously until the ball moves, and during application, continue to shake the product occasionally to keep it homogeneous. Spray from a distance of 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent valve blockage.

CHARACTERISTICS
Base: Pure aluminum paint
Propellant: Odorless denatured hydrocarbon
Coverage power: High
Dry film thickness: 15/20 microns
Drying: Fast
Temperature resistance: High
Color: Metallic
Specific gravity: 0.9 kg/lt
Dry residue: Approximately 30'

In stock

SILICONI

Reference: ZINCOSIL 400

SILICONI |ZINCOSIL 400 Cold galvanizing colorless

€8.89

7,29 € tax excl.

Fast delivery

2-year warranty

ZINCONSIL 400 is to be used for cold galvanizing on all metallic materials with a high zinc content.
This aerosol product with a high zinc content is particularly suitable for touch-ups after welding, for restoration or galvanizing of metal sheets, for galvanizing and protecting metal parts outdoors, and for restoring the zinc surfaces of grilles, gates, sheets, tanks and metal structures.
The aerosol is fitted with a drip-free diffuser; its use does not cause stains.
ZINCONSIL 400 also provides good protection against corrosion caused by atmospheric agents such as salinity and humidity.

500 ml aerosol

PROPERTIES
High zinc content
Fast drying, drip-free
High covering power
Durable protection
High resistance to corrosion, atmospheric agents and oxidation
Paintable
Colour identical to galvanizing

INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from clogging.

Dry film thickness: 20 to 40 µm (cross-coat coverage)
Covering power: high
Coverage capacity: approx. 120 ml/m²
Drying time: 5 to 10 minutes. Fast drying, drip-free

In stock

Trafimet

Reference: MT0581

TRAFIMET |Accessories kit for MIG torch 250 A

€35.90

29,43 € tax excl.

Fast delivery

2-year warranty

This kit includes:
10 contact tips Ø 0.8 M6 steel / stainless steel
10 contact tips Ø 1.0 M6 steel / stainless steel
2 gas diffusers
2 nozzle springs
2 gas nozzles Ø 15 mm - Length 57 mm

In stock

Hyundai

Reference: Supershield.11

HYUNDAI |Flux-cored wire Ø 0.9 mm gasless spool Ø 200 mm weight 5 kg

(3 reviews)

€81.29

66,63 € tax excl.

Fast delivery

2-year warranty

Flux-cored wire spool for welding structural steels for general use and galvanized steels.
All-position welding.
Stable arc, easy to control, low spatter.

Application field: Light metal construction, Automotive bodywork, round steel for concrete .....
Perfectly suitable for outdoor welding work and repair work, when the use of gas-shielded wire is not possible.

Wire section offered: 0.9 mm
Standard AWS A5.20 - E71T-11

The use of this welding wire does not require a gas shielding during operation. It is the flux core of the melting wire that provides protection during the welding process.

Delivered in cardboard box.
Spool Ø 200 mm weight 5 kg

In stock

GEKA

Reference: FIL-300-Corten

GEKA | Corten Steel Wire Spool Ø 300 mm weight 15 Kg

€171.81

140,83 € tax excl.

or 3 x 57,27 €

Free delivery

2-year warranty

Corten 80 SG wire for welding low-alloy Cu Cr Ni steels
Standard AW A5.28 : ER80S-G
Standard ISO 16834-A : G Z Mn3NiCu

Combinations	Price	quantity
0.8 mm	€171.81
1 mm	€159.61
1.2 mm	€147.41

In stock

GEKA

Reference: FIL-300

GEKA | SG2 Steel Wire Spool Ø 300 mm weight 15 kg

(3 reviews)

€64.97

53,25 € tax excl.

Fast delivery

2-year warranty

SG2-70S6 steel wire - available in Ø 0.6 - 0.8, 1 and 1.2 mm
Used for steel construction, machine manufacturing, boats, tanks, pipes, tubes, thin sheet metal, steel furniture, bodywork, chassis and reinforcements
The use of this welding wire requires a shielding gas supply (Argon + CO² mixture)

AWS standard A5.18 ER70S-6
ISO standard: 14341 -A G 42 3 M G3Si1

Combinations	Price	quantity
0.8 mm	€64.97
1 mm	€60.98
1.2 mm	€57.95
0.6 mm	€126.06

In stock

GEKA

Reference: super 299

GEKA - SUPER 299 | Rutile electrodes for welding dissimilar steel or stainless

(5 reviews)

€47.98

39,33 € tax excl.

Fast delivery

2-year warranty

Rutile-basic electrode depositing an austenitic-ferritic steel.
Specially suited for welding dissimilar steels (steel, stainless with non-alloy steel), and materials known to be difficult to weld such as tool steels, manganese steels, cast steels, spring steels, gears, cylinder rods...
The deposited metal is particularly resistant to cracking and is also suitable as an underlay before hard facing and for facing cutting or shearing tools.
Smooth fusion, attractive bead appearance - self-releasing slag.
Electrode baking: 250°C / 2 h if necessary.
Inter-pass temperature: max 250°C
Standard AWS A 5.4 / E312-16
Standard ISO 3581-A / E29 9 R 12

Available in 1 or 5 kg cases and two diameters: 2.5 and 3.2 mm

For Ø 2.5: the 1 kg case contains 68 electrodes and the 5 kg case: 370
For Ø 3.2: the 1 kg case contains 30 electrodes and the 5 kg case: 150

Combinations	Price	quantity
2.5 mm	€225.70
2.5 mm	€47.98
3.2 mm	€42.49
3.2 mm	€201.81

LINCOLN - Kit 35 C 50 accessories electrode holder + earth clamp Lincoln

In stock

Lincoln Electric

Reference: W000011139

LINCOLN - Kit 35 C 50 accessories electrode holder + earth clamp Lincoln

(2 reviews)

€167.75

137,50 € tax excl.

or 3 x 55,92 €

Free delivery

2-year warranty

This 35C50 kit includes:

1 SEGURA 300 electrode holder + 35 mm² cable 4 m long
1 Hippo 400 earth clamp + 35 mm² earth cable 4 m long

Conductor diameter 13 mm
Duty cycle 300A@35%

In stock

Kemppi

Reference: MG000601

KEMPPI - Accessories kit for MINARMIG welding machine

(1 review)

€80.31

65,83 € tax excl.

Fast delivery

2-year warranty

This kit includes:
10 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 steel / stainless steel
2 gas diffusers
2 insulating rings
2 gas nozzles

In stock

Weldas

Reference: 44-7110

Split leather electrode holder

(1 review)

€7.32

6,00 € tax excl.

Fast delivery

2-year warranty

Split leather electrode holder
Capacity 2.3 kg

In stock

Trafimet

Reference: TC0

10 JUMBO ceramic nozzles for TIG torch

(2 reviews)

€28.28

23,18 € tax excl.

Fast delivery

2-year warranty

10 jumbo ceramic nozzles for TIG torch type
9-20-20HC-25
17 - 18 - 20-25 - 26

Various diameters available:

GR 8: Ø 12.7 mm (TC0118)
GR 10: Ø 15.7 mm (TC0119)
GR 12: Ø 19.5 mm (TC120)

The indicated diameter is the inner diameter of the nozzle.

Combinations	Price	quantity
GR 8	€25.13
GR 10	€28.28
GR 12	€28.28

2 Diffusers for type 17-18 and 26 torch for JUMBO nozzle

In stock

Trafimet

Reference: TE0009

2 Diffusers for type 17-18 and 26 torch for JUMBO nozzle

(2 reviews)

€19.91

16,32 € tax excl.

Fast delivery

2-year warranty

This diffuser is suitable for TIG torches of type 17-18 or 26 with JUMBO nozzle

Available in several diameters from 1.6 to 3.2 mm.

Combinations	Price	quantity
1.6 mm	€19.91
2.4 mm	€19.91
3.2 mm	€17.74

2 Diffusers for type 9-20 and 25 torch for JUMBO nozzle

In stock

Trafimet

Reference: TE0088

2 Diffusers for type 9-20 and 25 torch for JUMBO nozzle

(1 review)

€17.74

14,54 € tax excl.

Fast delivery

2-year warranty

This diffuser is suitable for TIG torches with the following duty cycles:

DC: 110 A @ 35 %
AC: 95 A @ 35 %

Available in several diameters from 1.6 to 3.2 mm.

Combinations	Price	quantity
1.6 mm	€17.74
2 mm	€17.74
2.4 mm	€17.74
3.2 mm	€17.74

2 Electrode collets for TIG torch type 9-20 and 25 for JUMBO nozzle

In stock

Trafimet

Reference: TD0088

2 Electrode collets for TIG torch type 9-20 and 25 for JUMBO nozzle

€30.85

25,29 € tax excl.

Fast delivery

2-year warranty

This electrode collet is suitable for TIG torches type 9-20 and 25 when used with a JUMBO nozzle

Available in several diameters for use with tungsten electrodes from 1.6 to 3.2 mm.
Length 40 mm.

Combinations	Price	quantity
1.6 mm	€30.85
2 mm	€30.85
2.4 mm	€30.85
3.2 mm	€30.85

Lincoln Innershield NR-211-MP Wire Ø 0.9 mm

In stock

Lincoln Electric

Reference: ED016354

Lincoln Innershield NR-211-MP Wire Ø 0.9 mm

(3 reviews)

€175.89

144,17 € tax excl.

or 3 x 58,63 €

Free delivery

2-year warranty

Main Characteristics

Suitable for outdoor use on site in winds up to 50 km/h
All-position welding (including downhill) of sheet metal up to 12 mm thickness
Suitable for thin sheet> 1.2 mm with Ø 0.9 mm
Excellent choice for welding galvanised steels

Applications

Metal sheet or thin sheet scrap.
Galvanised metal scrap
Robotic/automatic applications
General fabrication
Maximum plate thickness: 5/16" for tubes up to 0.045" diameter for 0.045" (1.14 mm)
Maximum plate thickness: 1/2" (12.7 mm) for tubes from 0.068 to 3/32" diameter.

Welding Positions

All positions

Spool weight: 4.5 kg

Electrode holder 200 A + 25 mm² cable connector 9 mm

In stock

Sacit

Reference: KIT-562/KIT-564

Electrode holder 200 A + 25 mm² cable connector 9 mm

(17 reviews)

€53.30

43,69 € tax excl.

Fast delivery

2-year warranty

Electrode holder PARVA2 200 Amperes + 25 mm² cable length 3 m (KIT-562) or length 4 m (KIT 564)
Earth clamp opening 45 mm

Duty cycle 150 A @60% - 200 A @ 35%
Connector 9 mm

Combinations	Price	quantity
3 M	€53.30
4 M	€61.68

Electrode holder 250 A + 35 mm² cable - 13 mm connector

In stock

Sacit

Reference: KIT-516/KIT-566

Electrode holder 250 A + 35 mm² cable - 13 mm connector

(5 reviews)

€98.99

81,14 € tax excl.

Fast delivery

2-year warranty

Perfecta 3 electrode holder 250 Amperes + 35 mm² cable length 4 m (KIT-516) or length 5 m (KIT 566)
Ground clamp opening 45 mm

Duty cycle 200 A @60% - 250 A @ 35%
TX 50 connector

Combinations	Price	quantity
4 M	€98.99
5 M	€109.87

In stock

GEKA

Reference: 4043

Electrodes for ALUMINIUM welding GEKA

(1 review)

€100.14

82,08 € tax excl.

Fast delivery

2-year warranty

Metal case containing 2 kg of vacuum-packed aluminium electrodes.
Standard AWS A5.3 / 4043
Standard TS 9604 / EL AlSli 5

The Ø 2.5 mm electrode pack contains 112 pieces - Length 350 mm
The Ø 2.5 mm electrode pack contains 70 pieces - Length 350 mm

Before ordering these electrodes, make sure your MMA (stick) welding machine is capable of welding aluminium.
This is not possible with all machines. Please check with the manufacturer or the instruction manual in your possession before purchasing.
These rods are sold in a vacuum-sealed case: no returns will be accepted

Combinations	Price	quantity
2.5 mm	€100.14
3.2 mm	€114.89

250 A ground clamp + 25 mm² cable - 13 mm connector

In stock

Sacit

Reference: KIT-251/259

250 A ground clamp + 25 mm² cable - 13 mm connector

(3 reviews)

€43.41

35,58 € tax excl.

Fast delivery

2-year warranty

NEVADA 3 ground clamp with 25 mm² cable, length 3m (KIT-251) or 4m (KIT-259)

Duty cycle 200 A @60% - 250A @ 35%
Dinse TX 50 connector

H01N2-D-HAR rubber electrical wiring

Electrogalvanized steel sheet clamp with brass contacts bridged by a copper braid. Cable secured with a copper strip and steel cable clamp
Maximum opening 45 mm.

Combinations	Price	quantity
3 M	€43.41
4 M	€53.52

Earth clamp 250 A + 25mm² cable - 9 mm connector

In stock

Sacit

Reference: KIT-243/244

Earth clamp 250 A + 25mm² cable - 9 mm connector

(9 reviews)

€40.04

32,82 € tax excl.

Fast delivery

2-year warranty

Earth clamp 250 Amperes + 25 mm² cable length 3 m (KIT-243) or length 4 m (KIT 244)
Earth clamp opening 45 mm

Duty cycle 200 A @60% - 250 A @ 35%
Connector TX 25
Opening 45 mm

Combinations	Price	quantity
3 M	€40.04
4 M	€49.72

Electrode holder + earth clamp Lincoln accessory kit - 9 mm connector

In stock

Lincoln Electric

Reference: W000011138

Electrode holder + earth clamp Lincoln accessory kit - 9 mm connector

(2 reviews)

€102.69

84,17 € tax excl.

Fast delivery

2-year warranty

This kit includes:

1 Caïman 200 electrode holder + 25 mm² cable 3 m long
1 Hippo 200 earth clamp + earth cable 3 m long

Connector diameter 9 mm

Supplier stock

Lincoln Electric

Reference: K14190-1

LINCOLN COOL ARC 24 cooling unit

€1,418.25

1 162,50 € tax excl.

or 4 x 354,56 €

Free delivery

2-year warranty

This cooling unit is intended for use with the Lincoln Aspect 200 AC/DC TIG welder equipped with a water-cooled torch

4 flux-cored wire rollers for Lincoln I-POWERTEC Standard or Advanced welding machine

In stock

Lincoln Electric

Reference: LINCOLN-GALET-POWERTEC-Flux

4 flux-cored wire rollers for Lincoln I-POWERTEC Standard or Advanced welding machine

€128.10

105,00 € tax excl.

Free delivery

2-year warranty

Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For flux-cored wire (gasless)

Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:

1 Metal wire guide for EURO connector
1 Plastic wire guide set

Combinations	Price	quantity
0.9 / 1 mm	€128.10
1 /1.2 mm	€128.10

4 Aluminum wire rollers for Lincoln I-POWERTEC Standard or Advanced welder

In stock

Lincoln Electric

Reference: LINCOLN-GALET-POWERTEC-Aluminium

4 Aluminum wire rollers for Lincoln I-POWERTEC Standard or Advanced welder

€109.80

90,00 € tax excl.

Fast delivery

2-year warranty

Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For solid aluminum wire

Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:

1 Metal wire guide for EURO connector
1 Plastic wire guide set

Combinations	Price	quantity
0.6 / 0.8 mm	€109.80
0.8 / 1 mm	€109.80
1 - 1.2 mm	€109.80
1.2 - 1.6 mm	€109.80
1.6 / 2.4 mm	€109.80

4 steel wire drive rolls for Lincoln I-POWERTEC Standard or Advanced welder

Supplier stock

Lincoln Electric

Reference: LINCOLN-GALET-POWERTEC-Acier

4 steel wire drive rolls for Lincoln I-POWERTEC Standard or Advanced welder

(3 reviews)

€109.80

90,00 € tax excl.

Fast delivery

2-year warranty

Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For solid steel or stainless steel wire

Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:

1 Metal wire guide for EURO connector
1 Plastic wire guide set

Combinations	Price	quantity
0.6 / 0.8 mm	€109.80
0.8 / 1 mm	€109.80
1 - 1.2 mm	€109.80
1.2 - 1.6 mm	€109.80
1.6 / 2.4 mm	€109.80

In stock

Trafimet

Reference: KCF

1 Female quarter-turn connector

(5 reviews)

€3.27

2,68 € tax excl.

Fast delivery

2-year warranty

1 Female quarter-turn connector.

Combinations	Price	quantity
35 - 50	€4.67
50 - 70	€5.67
10 - 25	€3.27

Accessories kit for MIG torch MB 36 350A

In stock

Gys

Reference: 041417

Accessories kit for MIG torch MB 36 350A

€55.91

45,83 € tax excl.

Fast delivery

2-year warranty

This kit includes:
5 contact tips Ø 1.0 M8 steel / stainless steel
5 contact tips Ø 1.2 M8 steel / stainless steel
5 contact tips Ø 1.0 M8 aluminium
5 contact tips Ø 1.2 M8 aluminium
3 diffusers 350 A
3 gas nozzles 350 A

In stock

Telwin

Reference: 742729

2 Drive Rolls for Flux-Cored Wire MIG Welding TELWIN Machine

(1 review)

€49.11

40,25 € tax excl.

Fast delivery

2-year warranty

2 Double-groove rollers for Mig-Mag TELWIN welder for flux-cored wire, available for wire diameter: 1 / 1.2 mm

Compatible with Telwin welders:

TECHNOMIG 223 TREO - 240-260

ELECTROMIG 281/2 Turbo - 300 SYN. - 230- 330 WAVE - 400, 450 Synergic -550 Synergic

MASTERMIG 300 -270/2 - 400 - 500

ELECTROMIG 300 Synergic - 330 Wave - 430 WAVE - 450 - 550 -330-

SUPERMIG 380

SUPERIOR 400 MIG PACK - 630 MIG PACK -

INVERPULSE 60.30, 60.40

In stock

Telwin

Reference: 742402

TELWIN TW 160 replacement MIG-MAG torch

(1 review)

€100.65

82,50 € tax excl.

Fast delivery

2-year warranty

Telwin TW 160 replacement MIG-MAG torch, length 2 m, for the welding machine references listed below

BIMAX 132 - 140 - BIMAX 152 - BIMAX 4.165 Turbo - BIMAX 162 Turbo
TECHNOMIG 150 DUAL SYNERGIC
MAXIMA 160

Supplier stock

DECA

Reference: DECA-GAL-MIGA

Steel wire drive roller for DECA MIGA 215 - 218 - 220 unit

(13 reviews)

€11.90

9,75 € tax excl.

Fast delivery

2-year warranty

The drive rollers listed below are compatible with the following DECA units:

MIGA 215 - MIGA 218 - MIGA 220

for welding wire:

Steel Ø 0.6 / flux-cored wire Ø 0.6 to 1.2* mm
Steel or stainless steel Ø 0.8 / 1** mm

* Flux-cored wire Ø 1.2 mm is possible with the MIGA 220 and MIGA 225XL units
For MIGA 215 and 218 models, flux-cored wire up to Ø 0.9 mm only.

** solid wire Ø1 mm steel or stainless steel is possible from the MIGA 220 unit

Combinations	Price	quantity
0.8 / 1 mm	€8.94
Flux-cored 0.6 to 1.2mm / steel wire 0.6 mm steel	€11.90

DECA

Reference: 011252

Drive roller aluminium wire for DECA MIGA 215-218-220 welding machine

(5 reviews)

€11.90

9,75 € tax excl.

Fast delivery

2-year warranty

Reversible drive roller for aluminium wire Ø 0.8 / 1 mm for the DECA welding machines listed below:

MIGA 215 - MIGA 218 - MIGA 220

This drive roller should also be used with the MIGA 220 welding machine when welding with aluminium wire Ø 1.2 mm.

In stock

Gys

Reference: 041233

Accessory kit for MIG torch MB 25 250A

(14 reviews)

€50.63

41,50 € tax excl.

Fast delivery

2-year warranty

This kit includes:
5 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 aluminium
3 contact tip holders 250 A
5 nozzle springs
3 gas nozzles

10 contact tips for Aluminium wire M6 thread - length 28 mm

In stock

Trafimet

Reference: MD0009

10 contact tips for Aluminium wire M6 thread - length 28 mm

(13 reviews)

€9.08

7,44 € tax excl.

Fast delivery

2-year warranty

Pack of 10 Trafimet contact tips for welding with steel or stainless steel wire

3 diameters available: 0.8 - 1 and 1.2 mm

M6 thread. Length 28 mm

For MIG-MAG torch 250A @60%

Combinations	Price	quantity
0.8 mm	€9.08
1 mm	€9.08
1.2 mm	€9.08

GYS | 1 Type B roller for flux-cored wire MIG-MAG welding

In stock

Gys

Reference: GYS-GAL1B-FLUX

GYS | 1 Type B roller for flux-cored wire MIG-MAG welding

(1 review)

€24.35

19,96 € tax excl.

Fast delivery

2-year warranty

We offer 1 reversible roller for flux-cored wire for MIG-MAG welder GYS

Ø 0,6 /0,9 mm
0,9 / 1,2 mm

Compatible with Gys welders:

MONOGYS 200-2CS
MONOGYS 250/320
TRIMIG
PROMIG
MULTIPEARL 210 and 211
MULTIWELD 320 and 400
NEOPUSE 220
KRONOS
Wire feeder WF35

Combinations	Price	quantity
0.9 / 1.2 mm	€24.35
0.6 / 0.9 mm	€24.35

1 Type B roller for aluminium wire MIG welding GYS welder

In stock

Gys

Reference: GYS-GAL-B-ALUMINIUM

1 Type B roller for aluminium wire MIG welding GYS welder

€19.22

15,75 € tax excl.

Fast delivery

2-year warranty

1 double V-groove roller 35° for GYS MIG welder for solid aluminium wires, available for wire diameters:
0.8/ 1 mm
1 / 1.2 mm

GYS welder compatibility:

• MONOGYS 200-2CS et 250-4CS
• TRIMIG 200-4S, 250-4S et 300-4S
• PROMIG 350-4S et 350-4S DUO DV
• TF-4R
• MULTIPEARL 200.4 XL et 201.4
• CARMIG
• M1, M3, T1 et T3 GYS
• W5S-4L

Combinations	Price	quantity
0.8 / 1 mm	€19.22
1 / 1.2 mm	€19.22

1 Type B Roller for Steel Wire MIG Welding GYS Welder

In stock

Gys

Reference: GYS-GAL-B-ACIER

1 Type B Roller for Steel Wire MIG Welding GYS Welder

€19.78

16,21 € tax excl.

Fast delivery

2-year warranty

1 double-groove roller for GYS MIG-MAG welder for steel or stainless wire, available for wire diameter:
0.6 / 0.8 mm
0.8 / 1 mm
1 / 1.2 mm

Compatible with GYS welders:

• MONOGYS 200-2CS

Combinations	Price	quantity
0.6 / 0.8 mm	€19.78
0.8 / 1 mm	€19.78
1 / 1.2 mm	€19.78

In stock

Telwin

Reference: 981863

Cleaning brush kit

(2 reviews)

€90.99

74,58 € tax excl.

Fast delivery

2-year warranty

Cleaning brush kit for Cleantech 200 Telwin
This item is used when cleaning with the BRUSH IT cleaner
These brushes are suitable for cleaning small weld beads

In stock

DECA

Reference: DECA-GAL-JOB220-F

Flux-cored wire feed roller for DECA JOB 220 and MIGA 225XL welder

€18.15

14,88 € tax excl.

Fast delivery

2-year warranty

The rollers listed below are compatible with the following DECA welding machines:

JOB 220 LAB
MIGA 225 XL

for gasless welding wire

Ø 0.8 / 0.9 mm
Ø 0.9 / 1.2 mm

Combinations	Price	quantity
0.8 solid / 0.9 mm	€18.15
1 - 1.2 mm	€18.15

In stock

DECA

Reference: DECA-2GAL-JOB522-AL

2 Aluminum wire drive rolls for DECA JOB 522 and 523 LAB

(1 review)

€33.55

27,50 € tax excl.

Fast delivery

2-year warranty

The drive rolls proposed below are compatible with the following DECA multi-process welding machines:

JOB 522 and 523 LAB

for aluminum welding wire

Ø 0.8 / 1 mm
Ø 1 / 1.2 mm

Combinations	Price	quantity
0.8 / 1 mm	€33.55
1 - 1.2 mm	€33.55

In stock

DECA

Reference: DECA-2GAL-JOB522

2 Steel wire drive rolls for DECA JOB 522 and 523 LAB welding machine

€33.04

27,08 € tax excl.

Fast delivery

2-year warranty

The drive rolls listed below are compatible with the following DECA welding machines:

JOB 522 and 523 LAB

for welding wire:

Steel or stainless steel Ø 0.6 / 0.8 mm
Steel or stainless steel Ø 1 / 1.2 mm

Combinations	Price	quantity
0.6 / 0.8 mm	€33.04
1 - 1.2 mm	€33.04

In stock

DECA

Reference: DECA-GAL-JOB220-AL

Aluminum Wire Drive Roller for DECA JOB 220 and Miga 225 XL

€14.03

11,50 € tax excl.

Fast delivery

2-year warranty

The drive rollers listed below are compatible with the following DECA machines:

JOB 220 LAB
MIGA 225 XL

for aluminum welding wire of diameter

0.8 / 1 mm
1 / 1.2 mm

Combinations	Price	quantity
0.8 / 1 mm	€14.13
1 - 1.2 mm	€14.03

In stock

DECA

Reference: 011224

2 flux-cored wire drive rollers for DECA JOB 522-523 LAB

€42.19

34,58 € tax excl.

Fast delivery

2-year warranty

2 drive rollers for DECA multi-process machine reference JOB 522 or 523 LAB, for flux-cored welding wire (gasless) with diameter 0.8 to 1.2 mm.

Pack of 5 ALUMINIUM electrodes Ø 3.2 mm GYS

In stock

Gys

Reference: 084803

Pack of 5 ALUMINIUM electrodes Ø 3.2 mm GYS

(18 reviews)

€7.93

6,50 € tax excl.

Fast delivery

2-year warranty

Aluminium Electrodes - D 3.2 mm - L 350mm
Welds aluminium parts and alloys
5% silicon content
Electrode diameter: 3.2 mm
Welding thickness: 3.2 mm
Welding power setting: 90 Amp
Ideal for the automotive, marine, chemical industry…
Connect the electrode holder to the + terminal of the welder
Arc striking from 60V

Classification:
AWS A5.3 : E4043
ISO 18273 : Al 4043 A
DIN 1732 : EL-AlSi5

In stock

Trafimet

Reference: GM0501

Trafimet wire guide liner for MIG torch welding steel or stainless steel Length 4 M

(4 reviews)

€7.94

6,51 € tax excl.

Fast delivery

2-year warranty

Wire guide liner for steel or stainless steel wire - Length 4 m

3 liners available to choose according to the diameter of the selected welding wire

For wire Ø 0.6 to 0.9 mm: Inner diameter 1.4 mm and outer Ø of the liner 4.6 mm (GM0501)
For wire Ø 1 and 1.2 mm: Inner diameter 2 mm and outer Ø of the liner 4.6 mm (GM0511)
For wire Ø 1.2 and 1.6 mm: Inner diameter 2.4 mm and outer Ø of the liner 4.7 mm (GM0541)

Combinations	Price	quantity
0.6 - 0.9 mm	€7.94
1 - 1.2 mm	€7.94
1.2 - 1.6 mm	€7.94

In stock

Telwin

Reference: 804031

CLEAN IT 1L container

€29.49

24,17 € tax excl.

Fast delivery

2-year warranty

Stainless steel weld cleaning liquid for wide or long weld beads
1 L container.
Applied with a suitable pad. Reference 981866

In stock

Telwin

Reference: 981866

Cleaning pad kit

€40.57

33,25 € tax excl.

Fast delivery

2-year warranty

Cleaning pad kit for Cleantech 200 Telwin
This item is used when cleaning with the CLEAN IT cleaner
These pads are suitable for cleaning large weld beads

10 Aluminium contact tips for LGS-LGP 250 Lincoln torch

In stock

Lincoln Electric

Reference: KP10441A

10 Aluminium contact tips for LGS-LGP 250 Lincoln torch

(5 reviews)

€12.81

10,50 € tax excl.

Fast delivery

2-year warranty

10 contact tips for steel or stainless steel welding, designed for Lincoln torch LGS 250 G - LGP 250 G - LGP 250 G FX - LG 250 G-E

M6 thread, length 28 mm.
3 available diameters: 0.8, 1 and 1.2 mm.

Combinations	Price	quantity
0.8 mm	€8.59
1 mm	€12.81
1.2 mm	€8.85

In stock

Sacit

Reference: WP2116

Rubber-insulated copper welding cable

(39 reviews)

€5.28

4,33 € tax excl.

Fast delivery

2-year warranty

Specific cable for welding, compliant with the European low voltage directive.
Sheath color: BLACK.
Reference standard: H01N2-D HAR.

Operating characteristics:
Maximum operating temperature of the copper braid: 90 °C.
Short-circuit temperature: 250 °C.
Good resistance to abrasion, atmospheric agents and ozone.
Good resistance to frequent bending and twisting.
Type of use: Production of ground cables and electrode holder cables.
During application the welding cable must not be coiled.

Three sections available:

16 mm² for use 120 A @60% - 130 A @35%
25 mm² for use 164 A @60% - 184 A @35%
35 mm² for use 210 A @60% - 241 A @35%

Sold by the linear meter
If you want 2 linear meters of cable, you must order 2 pieces in your cart.

Combinations	Price	quantity
16 mm²	€5.28
25 mm²	€10.55
35 mm²	€13.82

1 Drive roll for Lincoln Speedtec and Powertec welder

In stock

Lincoln Electric

Reference: LINCOLN-GALET

1 Drive roll for Lincoln Speedtec and Powertec welder

(10 reviews)

€35.59

29,17 € tax excl.

Fast delivery

2-year warranty

4 drive rolls available depending on the Ø and type of welding wire:

For solid steel or stainless steel wire Ø 0.8 / 1 mm (Lincoln reference KP14016-1.0)
For solid steel or stainless steel wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2)

For solid aluminium wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2A)
For flux-cored wire Ø 0.9 / 1.2 mm (Lincoln reference KP14016-1.1R)

The drive roll is reversible; with one roll you have two possible welding wire diameters.

These drive rolls fit the following Lincoln welders:
Speedtec 180-200-215 C
POWERTEC 161C-191C-213C-271C

Combinations	Price	quantity
0.6 / 0.8 mm	€39.65
0.8 / 1 mm	€35.59
1 - 1.2 mm	€39.65
flux-cored wire 0.9 - 1.2 mm	€39.65
Flux-cored 1.2 / 1.6 mm	€31.59
AL 1 / 1.2 mm	€39.65

In stock

Telwin

Reference: 802663

Aluminum welding kit for Telwin welder

€91.29

74,83 € tax excl.

Fast delivery

2-year warranty

This kit is used for aluminum welding in MIG-MAG mode with Telwin welding machines: Electromig 300 and Electromig 330 Wave

This welding is performed under pure argon shielding gas.

It includes:

1 wire liner 3 m for wire Ø 1 and 1.2 mm
1 wire feed roller 1 / 1.2 mm
3 contact tips Ø 1 and 1.2 mm.

Supplier stock

Telwin

Reference: 742576 TELW-GAL2-ACIER

2 Drive rollers for steel wire MIG welding TELWIN welder

(1 review)

€14.74

12,08 € tax excl.

Fast delivery

2-year warranty

2 double-groove rollers for Telwin MIG-MAG welding machine for steel or stainless steel wire, available for wire diameters: 0.6 / 0.8 mm and 1 / 1.2 mm

Compatible with Telwin welding machines:

TECHNOMIG 243 WAVE - 223 TREO 240 - 260

ELECTROMIG 230 - 300 Synergic - 330 Wave - 430 WAVE - 550 SYNERGIC - 281/2 Turbo - 400 - 450 SYNERGIC -

MASTERMIG 270/2 - 300 400 - 500

SUPERMIG 380

SUPERIOR 400 MIG PACK - 630 MIG PACK

INVERPULSE 60.30- 60.40

Combinations	Price	quantity
0.6 / 0.8 mm	€14.74
0.8 / 1 mm	€40.47
1 / 1.2 mm	€30.45

In stock

Telwin

Reference: 722167 TELW-GAL2-ALU

2 Drive Rolls for Aluminium Wire MIG Welding Telwin Welder

(1 review)

€40.05

32,83 € tax excl.

Fast delivery

2-year warranty

2 double-groove rollers for Telwin welding machine for aluminum wires, available for wire diameters: 0.8 / 1 mm and 1 / 1.2 mm

Compatible with Telwin welding machines:

TECHNOMIG 243 WAVE - 240 - 260

ELECTROMIG 281/2 Turbo -300 SYN. - 230 - 330 WAVE -400 - 450 SYNERGIC - 300 Synergic - 430 WAVE - 550 SYNERGIC -

MASTERMIG 270/2 - 300 - 400 - 500

SUPERMIG 380

SUPERIOR 400 MIG PACK -630 MIG PACK -

INVERSEPULSE 60.30 - 60.40

Combinations	Price	quantity
0.8 / 1 mm	€47.07
1 / 1.2 mm	€40.05

10 contact tips for steel-stainless steel wire M8 thread - Length 30mm

In stock

Trafimet

Reference: MD0005-1

10 contact tips for steel-stainless steel wire M8 thread - Length 30mm

(1 review)

€11.32

9,28 € tax excl.

Fast delivery

2-year warranty

Pack of 10 Trafimet contact tips for welding with steel or stainless steel wire

3 diameters available: 0.8 - 1 and 1.2 mm

M8 thread. Length 30 mm

For Mig-Mag torch 450A @100%

Combinations	Price	quantity
0.8 mm	€10.58
1 mm	€11.32
1.2 mm	€11.32

10 contact tips for aluminum wire M8 thread - Length 30 mm

In stock

Trafimet

Reference: MD0005

10 contact tips for aluminum wire M8 thread - Length 30 mm

€11.32

9,28 € tax excl.

Fast delivery

2-year warranty

Bag of 10 Trafimet contact tips for welding with aluminum wire

3 diameters available: 0.8 - 1 and 1.2 mm

M8 thread. Length 30 mm

For MIG-MAG torch 450A @100%

Combinations	Price	quantity
0.8 mm	€11.32
1 mm	€10.77
1.2 mm	€11.32

In stock

Trafimet

Reference: EA030

5 springs for MIG-MAG torch swan neck

(11 reviews)

€9.74

7,98 € tax excl.

Fast delivery

2-year warranty

5 Springs for MIG-MAG torch swan neck

Depending on the type of your torch (MB15 or MB25), you will need to choose one of the two available references

Combinations	Price	quantity
150A	€9.74
250A	€7.32

In stock

Trafimet

Reference: MD0009

10 contact tips for Aluminium wire M6 thread - length 28 mm

(31 reviews)

€9.08

7,44 € tax excl.

Fast delivery

2-year warranty

Pack of 10 Trafimet contact tips for welding with steel or aluminium wire

3 diameters available: 0.8 - 1 and 1.2 mm

M6 thread. Length 28 mm

For Mig-Mag torch 250A @60%

Combinations	Price	quantity
0.8 mm	€9.08
1 mm	€9.08
1.2 mm	€9.08

10 contact tips for steel or stainless steel wire M6 thread - Length 25 mm

In stock

Trafimet

Reference: MD0008

10 contact tips for steel or stainless steel wire M6 thread - Length 25 mm

(148 reviews)

€9.08

7,44 € tax excl.

Fast delivery

2-year warranty

Pack of 10 Trafimet contact tips for welding with steel wire or stainless steel wire

Available diameter: 0.6 - 0.8 - 0.9 - 1 and 1.2 mm

M6 thread.
Length 25 mm

For Mig-Mag torch 150A @60%

Combinations	Price	quantity
0.8 mm	€9.08
0.9 mm	€9.08
1 mm	€9.08
1.2 mm	€9.08
0.6 mm	€9.08

10 Lincoln contact tips for LGS-LGP 250 torch

In stock

Lincoln Electric

Reference: KP10441

10 Lincoln contact tips for LGS-LGP 250 torch

(17 reviews)

€9.25

7,58 € tax excl.

Fast delivery

2-year warranty

10 contact tips for steel or stainless steel welding designed for Lincoln torch LGS 250 G - LGP 250 G - LGP 250 G FX - LG 250 G-E

M6 thread Length 28 mm.
3 diameters available: 0.8 - 1 and 1.2 mm.

Combinations	Price	quantity
0.8 mm	€9.25
0.9 mm	€6.81
1 mm	€11.99
1.2 mm	€7.78

Save 10%

In stock

Gys

Reference: 060258

Isothermal quiver for welding rod

(10 reviews)

€29.48

€32.76

24,17 € tax excl.

Fast delivery

2-year warranty

Capacity 7 kg
For electrodes up to 45 cm
Maximum electrode temperature 105°C
Dimensions: 500 x 120 x 110 mm - 430g

10 contact tips for steel or stainless steel wire thread M5 - Length 18 mm

In stock

Trafimet

Reference: MD0001

10 contact tips for steel or stainless steel wire thread M5 - Length 18 mm

(26 reviews)

€6.81

5,58 € tax excl.

Fast delivery

2-year warranty

These contact tips are available in 3 diameters: 0.6, 0.8 and 1 mm.
The Ø 1 mm diameter allows the use of flux-cored wire.

Thread M5
Length: 18 mm

These contact tips are intended in particular on our site for the Fox 160 and Panther 132 welding machines

Combinations	Price	quantity
0.8 mm	€6.81
1 mm	€6.81
0.6 mm	€6.81

Pack of 12 INOX 316L Ø 2 mm GYS electrodes

In stock

Gys

Reference: 082359

Pack of 12 INOX 316L Ø 2 mm GYS electrodes

(34 reviews)

€8.64

7,08 € tax excl.

Fast delivery

2-year warranty

Stainless Steel 316L Electrodes - D2 mm - L 300mm
Welds stainless steel 316L/308L/304L
Electrode diameter: 2 mm
Weldable thickness: 2 mm
Welding power setting: 40 to 70 Amp
Multiple positions (except downhill)
Fine-looking weld bead
Good slag detachment
Connect the electrode holder to the + terminal of the machine
Arc striking from 40V

Classification:
EN 1600 : 19123 LR12
AWS 5.4: E 316L-16

GYS Ø 2.5 mm rutile electrodes for steel welding

In stock

Gys

Reference: ELEC-2.5-ACIER-GYS

GYS Ø 2.5 mm rutile electrodes for steel welding

(103 reviews)

€18.81

15,42 € tax excl.

Fast delivery

2-year warranty

GY38 Steel Rutile Electrodes - Ø 2.5mm - L 350mm

Welds steel
Electrode diameter: 2.5 mm
Material thickness: 2.5 to 6mm
Welding power setting: 80Amp
Easy arc striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welder

Classification:
AWS A 5.1 : E6013
EN ISO 2560-A : E 420 RC 11

Combinations	Price	quantity
11	€3.45
50	€8.64
110	€18.81
230	€30.48

In stock

Gys

Reference: WS3915G

WS 3915G Cooling Liquid

(2 reviews)

€68.11

55,83 € tax excl.

Fast delivery

2-year warranty

Special welding coolant is essential for optimizing and preserving the performance of your spot welder's cooling system, and is also suitable for other welding processes. Its unique formula, anti-corrosive and low-conductivity, reduces the effects of electrolysis. The special welding coolant prevents the build-up of deposits and blockage of the cooling circuit compared to a standard coolant.

Its advantages:

1) Its low conductivity limits the risk of electrolysis in the cooling circuit and prevents deposits responsible for blockages in the cooling circuit.
2) Anti-corrosive in contact with heavy metals.
3) Frost-resistant down to -20°C, for operation even in the most demanding conditions.
4) Its ready-to-use formula can be used pure without any dilution.

Available in two packaging sizes of 5 or 10 litres

Combinations	Price	quantity
10 L	€142.13
5 L	€68.11

In stock

Gys

Reference: AMF

1 male / female adapter

(26 reviews)

€10.02

8,21 € tax excl.

Fast delivery

2-year warranty

Male / Female Adapter AMF 50/25
Note: 2 references available:
Female: Ø 9 mm - Male 13 mm for reference 038127
Female: Ø 13 mm - Male 9 mm for reference 038110
Duty cycle 300A @ 35% - 200 A @60%

Combinations	Price	quantity
F Ø 13 and M Ø 9 mm	€10.02
F Ø 9 and M Ø 13 mm	€12.71

Ceramic nozzles for type 17 - 18 - 26 TIG torch

In stock

Trafimet

Reference: TC000

Ceramic nozzles for type 17 - 18 - 26 TIG torch

(33 reviews)

€6.81

5,58 € tax excl.

Fast delivery

2-year warranty

Ceramic nozzles length 47 mm for TIG torch 140 A DC @ 35% and 125 A @35% AC

Various diameters available:

GR 4: Ø 6.4 mm (TC0002) sold in packs of 10
GR 5: Ø 8 mm (TC0003) sold in packs of 6
GR 6: Ø 9.8 mm (TC0004) sold in packs of 6
GR 7: Ø 11.2mm (TC0005) sold in packs of 6
GR 8: Ø 12.7 mm (TC0006) sold in packs of 6
GR 10: Ø 15.7 mm (TC0007) sold in packs of 6

Compatible with type 17 - 18 - 26 torches

The diameter indicated is the inner diameter of the nozzle.

Combinations	Price	quantity
GR 4	€8.59
GR 5	€6.81
GR 6	€6.81
GR 7	€6.81
GR 8	€6.81
GR 10	€9.14

6 Ceramic Nozzles for TIG Torch Type 9, 20 and 25

In stock

Trafimet

Reference: TC00

6 Ceramic Nozzles for TIG Torch Type 9, 20 and 25

(5 reviews)

€5.70

4,67 € tax excl.

Fast delivery

2-year warranty

6 ceramic nozzles for valve torch No. 6 for Tig torch 110 A DC @35% and 95 A @35% AC

Compatible with type 9 and 20 torches

Various diameters available:

GR 4: Ø 6.4 mm (TC0012P)
GR 6: Ø 9.8 mm (TC004P)

The indicated diameter is the inner diameter of the nozzle.

Combinations	Price	quantity
GR 4	€5.70
GR 6	€5.70

2 Electrode holder collets for TIG torch type 17-18 and 26

In stock

Trafimet

Reference: TD0001

2 Electrode holder collets for TIG torch type 17-18 and 26

(46 reviews)

€4.56

3,74 € tax excl.

Fast delivery

2-year warranty

This electrode holder collet is suitable for TIG torches of type 17-18 and 26

Available in several diameters for use with tungsten electrodes from 1 to 3.2 mm.

Length 50 mm.

Combinations	Price	quantity
1 mm	€4.56
1.6 mm	€4.56
2 mm	€4.56
2.4 mm	€4.56
3.2 mm	€4.56

2 Collets for TIG torch type 9-20 and 25

In stock

Trafimet

Reference: TD0003

2 Collets for TIG torch type 9-20 and 25

(12 reviews)

€2.39

1,96 € tax excl.

Fast delivery

2-year warranty

This collet is suitable for TIG torches of type 9-20 and 25

Available: in several diameters for use with tungsten electrodes from 1 to 3.2 mm.
Length 25 mm.

Combinations	Price	quantity
1 mm	€2.39
1.6 mm	€2.39
2 mm	€2.39
2.4 mm	€2.23
3.2 mm	€2.14

In stock

Trafimet

Reference: TE0001

2 Diffusers for torch type 17-18 and 26

(34 reviews)

€6.75

5,53 € tax excl.

Fast delivery

2-year warranty

This diffuser is suitable for TIG torches with the following duty cycles:

DC: 140 A @35 %
AC: 125 A @ 35 %

Available in several diameters from 1 to 3.2 mm.
Length 47 mm.

Combinations	Price	quantity
1 mm	€6.75
1.6 mm	€6.75
2 mm	€6.75
2.4 mm	€6.75
3.2 mm	€6.75

In stock

Trafimet

Reference: TE0003

2 Diffusers for type 9-20 and 25 torch

(9 reviews)

€3.00

2,46 € tax excl.

Fast delivery

2-year warranty

This diffuser is suitable for TIG torches with the following duty cycles:

DC: 110 A @35 %
AC: 95 A @ 35 %

Available in several diameters from 1 to 3.2 mm.
Length 21 mm.

Combinations	Price	quantity
1 mm	€3.00
1.6 mm	€3.38
2 mm	€3.38
2.4 mm	€3.38
3.2 mm	€3.21

2 Type B drive rolls for aluminum wire MIG welding GYS welder

In stock

Gys

Reference: GYS-GAL2-ALUMINIUM

2 Type B drive rolls for aluminum wire MIG welding GYS welder

(7 reviews)

€32.84

26,92 € tax excl.

Fast delivery

2-year warranty

2 double V-groove 35° drive rolls for GYS welder for solid aluminum wire, available for wire diameters:
0.8/ 1 mm
1 / 1.2 mm

GYS welder compatibilities:

• MONOGYS 200-4CS and 250-4CS
• TRIMIG 200-4S, 250-4S and 300-4S
• PROMIG 350-4S and 350-4S DUO DV
• TF-4R
• MULTIPEARL 200.4 XL and 201.4
• CARMIG
• M1, M3, T1 and T3 GYS
• W5S-4L

Combinations	Price	quantity
0.8 / 1 mm	€32.84
1 / 1.2 mm	€32.84

Earth clamp 250 A + 16 mm² cable - 9 mm connector

In stock

Sacit

Reference: KIT-242/245

Earth clamp 250 A + 16 mm² cable - 9 mm connector

(10 reviews)

€30.90

25,33 € tax excl.

Fast delivery

2-year warranty

Earth clamp 250 Amperes + 16 mm² cable 3 m long (kit-245) or 4 m long (kit-242)
Earth clamp opening 45 mm

Duty cycle 200 A @60% - 250 A @ 35%
TX 25 connector

Combinations	Price	quantity
3 M	€30.90
4 M	€37.75

Ground clamp 400 A + 35 mm² cable - 13 mm connector

In stock

Sacit

Reference: KIT-512/528

Ground clamp 400 A + 35 mm² cable - 13 mm connector

(9 reviews)

€70.82

58,05 € tax excl.

Fast delivery

2-year warranty

NEVADA 3 ground clamp + 35 mm² cable available in lengths of 3 and 4 m

Duty cycle 300 A @60% - 400 A @ 35%
Dinse TX 50 connector

H01N2-D-HAR rubber electrical wiring

Electrozinc-plated sheet steel clamp with brass contacts bridged by a copper braid. Cable clamped with a copper strip and steel cable clamp
Maximum opening 73 mm.

Combinations	Price	quantity
3 M	€70.82
4 M	€83.77

In stock

Trafimet

Reference: CX05

1 Male Quarter-Turn Connector

(35 reviews)

€3.21

2,63 € tax excl.

Fast delivery

2-year warranty

1 Male Quarter-Turn Connector

Combinations	Price	quantity
35 mm2	€6.20
50 mm²	€5.44
70 mm²	€6.05
10 - 25 mm²	€3.21

In stock

Telwin

Reference: 722019

Telwin roller for steel and stainless steel MIG welding wire Ø 0.6 - 0.8 mm

(12 reviews)

€4.01

3,29 € tax excl.

Fast delivery

2-year warranty

Telwin drive roller for steel or stainless steel MIG welding wire Ø 0.6 and 0.8 mm and 0.9 flux-cored wire

Compatible with TELWIN welding machines:

TELMIG 170/1 - 180/2 - 195/2 - 200/2 - 203/2 - 250/2 Turbo - 251/2 Turbo - 281/2 Turbo

TECHNOMIG 210 Dual Synergic - 180 EURO-225

MAXIMA 200 - 230 - 270

MINIMAX 100

In stock

Telwin

Reference: 802115

Aluminium Welding Kit for Telwin Machine

(6 reviews)

€81.23

66,58 € tax excl.

Fast delivery

2-year warranty

This kit is required for aluminium welding.

This welding is performed under pure argon shielding gas.

This kit is used for aluminium MIG-MAG welding with Telwin machines:
Telmig 195/2-200/2-203/2-250/2-251/2-281/2
Tecnomig 180 Euro - Technomig 210 dual synergic
Maxima 200 -230 - 270

It includes:

1 aluminium wire spool 0.8 mm Ø 100 mm weight 450g - 1 support kit for Ø 100 spool - 1 wire liner 3 m - 1 wire feed roller 0.8 / 1 mm - 5 contact tips Ø 0.8 mm and 1 mm.

2 Type B drive rolls for steel wire MIG welding GYS welder

In stock

Gys

Reference: GYS-GAL2-ACIER

2 Type B drive rolls for steel wire MIG welding GYS welder

(22 reviews)

€35.59

29,17 € tax excl.

Fast delivery

2-year warranty

2 double-groove drive rolls for GYS MIG-MAG welder for steel or stainless steel wire, available for wire diameters:
0.6 / 0.8 mm
0.8 / 1 mm
1 / 1.2 mm

Compatible with Gys welding machines:

• MONOGYS 200-4CS and 250-4CS
• TRIMIG 200-4S, 250-4S and 300-4S
• PROMIG 350-4S and 350-4S DUO DV
• TF-4R
• MULTIPEARL 200.4 XL and 201.4
• CARMIG
• M1, M3, T1 and T3 GYS
• W5S-4L

Combinations	Price	quantity
0.6 / 0.8 mm	€35.59
0.8 / 1 mm	€35.59
1 / 1.2 mm	€31.51

2 Type B drive rollers for flux-cored wire Ø 0.9-1.2 mm MIG welding GYS welder

In stock

Gys

Reference: 042407

2 Type B drive rollers for flux-cored wire Ø 0.9-1.2 mm MIG welding GYS welder

(8 reviews)

€40.61

33,29 € tax excl.

Fast delivery

2-year warranty

2 double-groove drive rollers for GYS MIG-MAG welder for flux-cored wire Ø 0.9 and 1.2 mm

Compatible with GYS welders:

TRIMIG 200-4S, 250-4S and 300-4S

PROMIG 350-4S and 350-4S DUO DV

TF-4R

MULTIPEARL 200.4 XL and 201.4

W5S-4L

MONOGYS

GYS | Reversible roller type D for flux-cored wire

In stock

Gys

Reference: GYS+GAL1D-FLUX

GYS | Reversible roller type D for flux-cored wire

(7 reviews)

€17.79

14,58 € tax excl.

Fast delivery

2-year warranty

Reversible roller for:

Solid wire Ø0.8 / flux-cored wire 0.9
Flux-cored wire Ø 0.6 / 0.9 mm

Suitable for GYS machines:

Easymig 110 - 130 and 140
Smartmig 110

suitable for DECA machines:

Miga 215 - Miga 218 and Miga 220.

suitable for SCHUMACHER machines:

M 120 NG
D 144WG

Combinations	Price	quantity
0.8 solid / 0.9 mm	€17.79
0.6 / 0.9 mm	€17.79

Type D drive roller for steel or stainless steel wire Ø 0.6 and 0.8 mm square shaft

In stock

Gys

Reference: 039483

Type D drive roller for steel or stainless steel wire Ø 0.6 and 0.8 mm square shaft

(6 reviews)

€19.26

15,79 € tax excl.

Fast delivery

2-year warranty

Drive roller for GYS MIG-MAG welding machine for steel or stainless steel wire of cross-section 0.6 and 0.8 mm.

Compatible with GYS welding machines:

Easymig: 110 - 130 and 140
Smartmig 110
Sparkmig 110
Neomig 130

Compatible with DECA welding machines:

Miga 215 - Miga 218 and Miga 220.

Accessories kit for MIG torch MB 15 150A

In stock

Gys

Reference: 041226

Accessories kit for MIG torch MB 15 150A

(22 reviews)

€49.81

40,83 € tax excl.

Fast delivery

2-year warranty

This kit includes:
5 contact tips Ø 0.6 M6 steel / stainless steel
5 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 0.8 M6 aluminium
3 contact tip holders 150 A
5 nozzle springs
3 gas nozzles

1 Type A drive roll for flux-cored wire MIG welding GYS welder

In stock

Gys

Reference: GYS-GAL1A-FLUX

1 Type A drive roll for flux-cored wire MIG welding GYS welder

(13 reviews)

€23.34

19,13 € tax excl.

Fast delivery

2-year warranty

Reversible drive roll for GYS MIG-MAG welder for flux-cored wire, available in the following diameters:
0.8 mm solid wire / 0.9 mm flux-cored wire
0.9 / 1.2 mm flux-cored wire
0.6 / 0.9 mm flux-cored wire

Compatible with GYS welding machines:

Smartmig 142 - 152 - 162 - 182 - 183 - 3P
Easymig 150 - 160 - 160XL

Multipearl 200-2

Multiweld
Monogys 200-2CS

Combinations	Price	quantity
0.9 / 1.2 mm	€23.34
0.8 solid / 0.9 mm	€23.34
0.6 / 0.9 mm	€23.34

Type A drive roll for aluminium wire Ø 0.8 and 1 mm MIG welding GYS machine

In stock

Gys

Reference: 041196

Type A drive roll for aluminium wire Ø 0.8 and 1 mm MIG welding GYS machine

(28 reviews)

€17.18

14,08 € tax excl.

Fast delivery

2-year warranty

Double-groove drive roll for GYS MIG-MAG welding machine for aluminium wire Ø 0.8 and 1 mm.

Compatible with GYS machines:

Easymig 150 - 160 - 160XL

Smartmig 142 - 152 - 162 - 182 - 183 - 3P

Multipearl 200-2

Multiweld

1 Type A drive roll for steel wire MIG welding GYS machine

In stock

Gys

Reference: GYS-GAL1A-ACIER

1 Type A drive roll for steel wire MIG welding GYS machine

(23 reviews)

€17.17

14,07 € tax excl.

Fast delivery

2-year warranty

Double-groove drive roll for GYS MIG-MAG machine for steel or stainless steel wire, available for diameters:
0.6 / 0.8 mm.
0.8 / 1 mm

Compatible with GYS machines:

Smartmig 142 -152 - 162 - 182 - 183 3P
Easymig 150 - 160 - 160XL
Sparmig 140 - 160
Multipearl 200-2

Multiweld

Combinations	Price	quantity
0.6 / 0.8 mm	€17.17
0.8 / 1 mm	€18.30

In stock

Telwin

Reference: 722629

Telwin Roller for MIG welding wire Ø 1 mm

(19 reviews)

€7.58

6,21 € tax excl.

Fast delivery

2-year warranty

Telwin drive roller for MIG welding wire Ø 1 mm Steel - Stainless Steel and Aluminium

Compatible with TELWIN welding machines:

BIMAX 140 - 152 - 162 Turbo - 4.165 Turbo

TECHNOMIG 150 - 180 - 180 EURO

TECHNOMIG 180 Dual Synergic - 210 Dual Synergic - 225

MAXIMA 160 - 190 - 200 - 230 - 270

TELMIG 170/1 - 180/2 - 195/2 - 200/2 - 203/2 - 250/2 - 251/2 Turbo - 281/2 TURBO - 250/2 TURBO

In stock

Telwin

Reference: 722626

Telwin roller for MIG steel flux-cored wire Ø 0.9- 1.2 mm

(18 reviews)

€5.04

4,13 € tax excl.

Fast delivery

2-year warranty

Telwin drive roller for MIG steel flux-cored wire Ø 0.9 - 1.2 mm

Compatible with TELWIN machines:

BIMAX 140 - 152 - 162 Turbo - 4.165 Turbo

TECHNOMIG 150 - 180 Synergic - 210 - 180 EURO - 210 Dual Synergic - 150 DUAL SYNERGIC - 180 DUAL SYNERGIC -

MAXIMA 160 - 190 - 200 - 230 - 270

TELMIG 281/2 TURBO

In stock

Telwin

Reference: 722529

Telwin drive roller for steel and stainless steel MIG welding wire Ø 0.6 - 0.8 - 0.9 mm

(12 reviews)

€4.01

3,29 € tax excl.

Fast delivery

2-year warranty

Telwin drive roller for MIG steel welding wire Ø 0.6 and flux-cored wire Ø 0.8 and 0.9 mm

Compatible with TELWIN welders:

MINIMAX 100 - BIMAX 110 - 132 -140 -152 - 162 Turbo - 4.165 Turbo

TECHNOMIG 150 Dual Synergic

MAXIMA 160- 190 -200 - 230 - 270

TECHNOMIG 180 EURO - 210 SYNERGIC - 180 DUAL SYNERGIC -

TELMIG 281/2 TURBO

In stock

Telwin

Reference: 802582-804109

Multi-purpose special MIG MAG pliers

(51 reviews)

€18.25

14,96 € tax excl.

Fast delivery

2-year warranty

Special pliers for MIG/MAG torch

Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Replacing the contact tip or torch nozzle

Supplier stock

DECA

Reference: DECA-GAL-JOB220

Steel wire drive roll for DECA JOB 220 and MIGA 225 XL welding machine

(2 reviews)

€14.08

11,54 € tax excl.

Fast delivery

2-year warranty

The drive rolls listed below are compatible with the following DECA welding machines:

JOB 220 LAB
MIGA 225 XL

for welding wire:

Steel or stainless steel Ø 0.6 / 0.8 mm
Steel or stainless steel Ø 1 / 1.2 mm

Combinations	Price	quantity
0.6 / 0.8 mm	€14.08
1 - 1.2 mm	€14.08

In stock

HELVI

Reference: 33805101

Drive roller for MIG welding wire Ø 0.8-1 mm Helvi Fox 185 Flex welder

€9.10

7,46 € tax excl.

Fast delivery

2-year warranty

Drive roller for Helvi Mig-Mag Fox 185 Flex Line welder for steel and stainless steel welding wire Ø 0.8 and 0.1 mm.

Also compatible with the following Helvi welder models:

Monomig 216 / 246 / 286 / 296
maximig 278 / 298
Unimig 298
Fox 185 Flex-Line
Tp 195

In stock

HELVI

Reference: 33805063

Drive roll for steel - stainless steel MIG welding wire Ø 1 - 1.2 mm Helvi machine

(3 reviews)

€15.20

12,46 € tax excl.

Fast delivery

2-year warranty

Drive roller for Helvi Mig-Mag welder for steel or stainless steel welding wire Ø 1 and 1.2 mm.

Also compatible with the following Helvi welder models:

Multimaker 192
Panther 152 / 172
Easymig 177 / 188 / 208N / 238
Monomig 166
Fox 180 / 181
Monomig 186 / 196

Diameter: 30.23 mm
Thickness 15.40 mm
Bore 9 mm

In stock

HELVI

Reference: 33805003

Drive roll for steel and stainless steel welding wire Ø 0.6-0.8 Helvi Fox welder

(1 review)

€10.11

8,29 € tax excl.

Fast delivery

2-year warranty

Drive roller for Helvi Mig-Mag Fox 185 Flex Line welder for Ø 0.6 and 0.8 mm steel and stainless steel wire.

Also compatible with the following Helvi welder models:

Monomig 216 / 246 / 286 / 296
maximig 278 / 298
Unimig 298
Fox 185 Flex-Line
Tp 195

HELVI

Reference: 33805001

Feed roller for MIG welding wire Ø 0.6-0.8 Helvi welder -180 and 181

(7 reviews)

€9.10

7,46 € tax excl.

Fast delivery

2-year warranty

Feed roller for Mig-Mag Helvi Fox 180 and 181 welder for wire Ø 0.6 and 0.8 mm steel and stainless steel and flux-cored wire Ø 0.8-0.9 mm
Also fits the following Helvi welder models:
Panther 132 / 152 / 172
Easymig 177
Monomig 166
Fox 180- 181

Diameter: 30.23 mm
Thickness: 15.40 mm
Bore: 9 mm

In stock

Telwin

Reference: 722130

Telwin drive roller for flux-cored steel MIG welding wire Ø 0.8 - 1.2 mm

(1 review)

€24.35

19,96 € tax excl.

Fast delivery

2-year warranty

Telwin drive roller for flux-cored steel MIG welding wire Ø 0.8 - 0.9 - 1.2 mm
Compatible with TELWIN machines:
TECHNOMIG 215 Dual Synergic - 225 - 230 and 243 WAVE -240 - 260
ELECTROMIG 220 Synergic - 230 - 300 SYN. - 330 WAVE
TELMIG 281/2 TURBO
MASTERMIG 220/2 - 270/2 - 300

In stock

Telwin

Reference: 742090

Telwin drive roller for aluminium MIG welding wire Ø 0.8-1 mm

(3 reviews)

€20.29

16,63 € tax excl.

Fast delivery

2-year warranty

Telwin drive roller for aluminium MIG welding wire Ø 0.8-1 mm
Compatible with TELWIN welding machines:
TECHNOMIG 215 Dual Synergic - 225 - 240 - 260
ELECTROMIG 220 Synergic - 230 - 330 WAVE
MASTERMIG 220/2 - 270/2 - 300

In stock

Telwin

Reference: 742575

Telwin drive roller for MIG steel wire Ø 0.6 - 0.8 mm

(2 reviews)

€10.13

8,30 € tax excl.

Fast delivery

2-year warranty

Telwin drive roller for MIG steel welding wire Ø 0.6 and 0.8 mm
Compatible with TELWIN welders:
TECHNOMIG 215 Dual Synergic - 223 TREO - 225 - 243 WAVE - 240- 260
ELECTROMIG 220 Synergic -300 SYN. - 230,330 WAVE-
MASTERMIG 220/2 - 270-2 - 300
TELMIG 281/2

In stock

Telwin

Reference: 742054

Telwin drive roller for MIG steel welding wire Ø 1- 1.2 mm

(5 reviews)

€15.76

12,92 € tax excl.

Fast delivery

2-year warranty

Telwin drive roller for MIG steel welding wire Ø 1- 1.2 mm
Compatible with TELWIN machines:
TECHNOMIG 215 Dual Synergic - 225 - 243 WAVE - 240- 260
ELECTROMIG 220 Synergic - 300 syn. - 230 - 330 wave-300 syn. -
MASTERMIG 220/2 - 270/2 - 300
TELMIG 281/2

In stock

Telwin

Reference: 802817

Aluminium Welding Kit for Telwin Machine

€96.59

79,17 € tax excl.

Fast delivery

2-year warranty

This kit is required for aluminium welding.

This welding is performed under pure argon shielding gas.

This kit is used for aluminium MIG-MAG welding with Telwin machines: Technomig 215 Dual Synergic - Electromig 220 Synergic and 230 Wave

It includes:

1 wire liner guide - 1 wire feed roller 0.8 / 1 mm - 3 contact tips Ø 0.8 mm and 1 mm.

DECA

Reference: 010673

Drive roller for DECA welder wire

(35 reviews)

€4.58

3,75 € tax excl.

Fast delivery

2-year warranty

Drive roller for DECA MIG-MAG welder compatible with the following DECA welder references:
Decastar 130 AC and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Decastar 150 E and 180 E
D-MIG 350 - 380 - 390
D-MIG 420S
Only the flux-cored wire roller can be fitted on the DECA Starflux 130 - Decastar 130 AC and D-Mig 230AC welders.
These welders operate exclusively with flux-cored wire (gasless).

Combinations	Price	quantity
0.8 mm	€7.02
flux-cored wire 0.8 - 0.9 - 1.2 mm	€4.58
0.6 mm	€4.58

Stainless steel wire 308 L diameter 0.8 mm spool Ø 100 mm weight 700 g

Supplier stock

Soudure pro

Reference: 010892

Stainless steel wire 308 L diameter 0.8 mm spool Ø 100 mm weight 700 g

(24 reviews)

€26.94

22,08 € tax excl.

Fast delivery

2-year warranty

Spool of stainless steel wire 308 L Ø 0.8 mm. Weight 700 g
The use of this welding wire requires the supply of a shielding gas (Argon +CO² or Argon + O²).
This wire allows welding of STAINLESS STEELS
The spool diameter is Ø 100 mm
Supplied in protective plastic film + cardboard box.

In stock

GEKA

Reference: FIL-INOX309L-200/5

GEKA | Stainless wire 309L spool Ø 200 mm weight 5 KG

€186.05

152,50 € tax excl.

or 3 x 62,02 €

Free delivery

2-year warranty

309L Si stainless steel wire spool Ø 200 mm. Weight 5 kg
Standard AWS A5.9 ER 309LSi
ISO 14343-A G 23 12 LSi

Wire section available: 0.8 and 1 mm

The spool diameter is Ø 200 mm

309L is often used in applications where stainless steels need to be welded to carbon steels or mild steels, as it offers good compatibility with both types of metals while maintaining good corrosion resistance and good mechanical strength.

The main characteristics of 309L TIG include:

Good corrosion resistance: Thanks to its chromium and nickel content, 309L offers excellent corrosion resistance, even at high temperatures.
High service temperature: It can be used at high temperatures, making it ideal for high-temperature applications.
Low carbon content: The low carbon content reduces susceptibility to intergranular corrosion after welding.

This type of material is often used in industrial applications such as heat exchangers, industrial furnaces, chemical and petrochemical equipment, as well as in shipbuilding and marine applications.

Combinations	Price	quantity
0.8 mm	€186.05
1 mm	€177.91

Supplier stock

Sacit

Reference: DELTA 6

SACIT | Earth clamp 500 A DELTA 6

(1 review)

€27.19

22,29 € tax excl.

Fast delivery

2-year warranty

Screw-on earth clamp 600 Amperes
Duty cycle 600 A @ 35% and 500 A @ 60%
Special rubber handle with metal core
Ideal for fixed machines and high amperage use
Maximum cable cross-section: 70-95 mm²

In stock

Kemppi

Reference: CTC1S

KEMPPI - 10 standard contact tips M6 thread

(1 review)

€26.33

21,58 € tax excl.

Fast delivery

2-year warranty

Bag of 10 Kemppi contact tips for welding with steel, stainless steel or aluminium wire

Available diameter: 0.6 - 0.8 - 0.9 - 1 mm

M6 thread.

For Mig-Mag torch 150A @60%

Combinations	Price	quantity
0.8 mm	€25.32
0.9 mm	€22.27
1 mm	€29.49
0.6 mm	€26.33

CORTEN steel wire coil diameter Ø 200 mm weight 5 kg

In stock

GEKA

Reference: FIL-200.CORTEN

CORTEN steel wire coil diameter Ø 200 mm weight 5 kg

(26 reviews)

€60.85

49,88 € tax excl.

Fast delivery

2-year warranty

CORTEN steel wire coil type 80 SG Ø 200 mm Weight 5 Kg
Standard AW A5.28 - ER 80S-G
Standard ISO 16834-A - G ZMn3Ni1 Cu

Wire section available: 0.8, 1 and 1.2 mm

The use of this welding wire requires the supply of gas (Argon + CO² mixture) during use.

Combinations	Price	quantity
0.8 mm	€60.85
1 mm	€59.99
1.2 mm	€65.06

In stock

Sacit

Reference: URANIA

URANIA electrode holder

(1 review)

€33.18

27,20 € tax excl.

Fast delivery

2-year warranty

Lever electrode holder
Die-cast brass body
Insulating coating in non-flammable, heat-resistant thermosetting materials
Electrode clamping in 5 positions

URANIA 5 For cable cross-section 35 - 50 mm²
250 A @ 60% and 300 A @ 35% - For electrodes from 3.2 to 5 mm

URANIA 6 For cable cross-section 50-70 mm²
300 A @ 60% and 400 A @ 35% - For electrodes from 4 to 6.3 mm

Combinations	Price	quantity
URANIA 5	€33.18
URANIA 6	€36.33

In stock

Sacit

Reference: GAMMA

GAMMA Brass Earth Clamp

(22 reviews)

€13.38

10,97 € tax excl.

Fast delivery

2-year warranty

Die-cast brass earth clamp
Copper strip shunt for optimum conductivity
Cable secured with malleable copper lamella and copper-plated steel cable clamp

GAMMA 0 For cable cross-section 16 - 25 mm²
150 A @ 60% and 200 A @ 35%
Opening: 45 mm

GAMMA 1 For cable cross-section 25 - 35 mm²
200 A @ 60% and 250 A @ 35%
Opening: 55 mm

GAMMA 2 For cable cross-section 50-70 mm²
400 A @ 60% and 500 A @ 35%
Opening: 65 mm

Combinations	Price	quantity
GAMMA 0	€6.32
GAMMA 1	€13.38
GAMMA 2	€21.22

In stock

Lincoln Electric

Reference: W000010167

Lincoln Freezcool Welding Coolant

€150.46

123,33 € tax excl.

or 3 x 50,15 €

Free delivery

2-year warranty

The Lincoln Freezcool special welding coolant is a ready-to-use heat transfer fluid. It contains an algaecide that limits fouling caused by algae growth in the cooling system.
Its thermal stability and dielectric properties make it a coolant particularly suited to high-technology circuits.

Fields of application:
Cooling of welding torches
Cooling of induction furnaces
Cooling of spot welding circuits, plasma torches

Non-volatile (no product loss), antifreeze protection down to -27°C - does not polarize, non-toxic and non-flammable, anti-corrosion and anti-algae.

Supplied in a 9.6 L container

Aluminium wire AlMg5 spool Ø 300 mm weight 7 kg

In stock

GEKA

Reference: FIL-300-ALU

Aluminium wire AlMg5 spool Ø 300 mm weight 7 kg

(3 reviews)

€136.74

112,08 € tax excl.

Free delivery

2-year warranty

Aluminium wire spool AlMg5 Ø 0.8 - 1 and 1.2 mm. Weight 7 kg

The use of this welding wire requires Argon gas shielding during operation

This wire is suitable for aluminium welding

The spool diameter is 300 mm

The price of the spool depends on the wire diameter chosen.

Combinations	Price	quantity
0.8 mm	€136.74
1 mm	€119.50
1.2 mm	€112.31

316 LSi stainless steel wire spool Ø 300 mm

In stock

GEKA

Reference: FIL-316-INOX

316 LSi stainless steel wire spool Ø 300 mm

€233.84

191,67 € tax excl.

or 3 x 77,95 €

Free delivery

2-year warranty

316 LSi stainless steel wire spool Ø available in wire diameters of 0.8, 1 and 1.2 mm, spool Ø 300 mm.
Spool weight: from 12.5 to 15 kg depending on the wire diameter.

Wire Ø 0.8 mm = 12.5 kg spool.
Wire Ø 1 and 1.2 mm = 15 kg spool.

The use of this welding wire requires a gas supply during use (Argon + CO² mixture).

This wire enables welding of stainless steel in the food industry, marine or boilermaking sectors.

This wire meets the AWS A5.9ER316LSi standard
ISO standard 14343-A G 19 9 L Si

Combinations	Price	quantity
0.8 mm	€233.84
1 mm	€279.59
1.2 mm	€281.61

In stock

Magswitch

Reference: W000373781

Magnetic 300 A MAGSWITCH Earth Clamp

(3 reviews)

€93.12

76,33 € tax excl.

Fast delivery

2-year warranty

Switchable magnetic earth clamp 300 Amperes
Duty cycle 300 A @ 60%
Ideal for welding parts with a large flat or curved surface
Please purchase the lug reference F11533
Maximum cable cross-section: 35-50 mm²

In stock

Sacit

Reference: F11371

Magnetic Ground Clamp 500 A

(2 reviews)

€22.63

18,55 € tax excl.

Fast delivery

2-year warranty

Magnetic ground clamp 500 Amperes
Duty cycle 400 A @ 60% and 500 A @ 35%
Ideal for welding parts with a large flat surface
Maximum cable cross-section: 35-50 mm²

Teflon liner for MIG torch Lincoln LGS 2 aluminium welding

In stock

Lincoln Electric

Reference: WP10419

Teflon liner for MIG torch Lincoln LGS 2 aluminium welding

(3 reviews)

€16.68

13,67 € tax excl.

Fast delivery

2-year warranty

Aluminium wire guide liner Ø 0.1 mm, 1.2 mm

2 lengths available for 3 or 4 m torch.

This liner fits 250 A torches used with Lincoln Speedtec 200 and 215 C welding machines

Combinations	Price	quantity
3 M	€16.68
4 M	€18.51

2 Drive Rolls ring + key for flux-cored wire

Lincoln Electric

Reference: 2GAL-Fourré

2 Drive Rolls ring + key for flux-cored wire

€22.88

18,75 € tax excl.

Fast delivery

2-year warranty

The flux-cored wire drive rolls listed below are compatible with the following welding machines:

DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD

LINCOLN
Quickmig 250 and Quickmig 300

SOL WELDING/OTAI
Futura 2005
Futura 2505

for welding wire: Ø 1.2 / 1.6 mm

Combinations	Price	quantity
0.8 solid / 0.9 mm	€22.88
1 /1.2 mm	€23.58

2 Ring drive rolls + key for aluminium wire

Lincoln Electric

Reference: 2GAL-Aluminium

2 Ring drive rolls + key for aluminium wire

(1 review)

€22.88

18,75 € tax excl.

Fast delivery

2-year warranty

The aluminium wire drive rolls listed below are compatible with the following welding machines:

DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD

LINCOLN
Quickmig 250 and Quickmig 300

SOL-WELDING (OTAI)
Futura 2005 and 0505C

for welding wire:

Aluminium Ø 0.8 / 1 mm
Aluminium Ø 1.2 / 1.6 mm

Combinations	Price	quantity
AL 1.2 / 1.6 mm	€26.33
AL 1 / 1.2 mm	€22.88

In stock

Lincoln Electric

Reference: 2GAL-Acier

2 Ring Drive Rolls + Key for Steel Wire

€48.19

39,50 € tax excl.

Fast delivery

2-year warranty

The drive rolls listed below are compatible with the following welding machines:

DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD

LINCOLN
Quickmig 250 and Quickmig 300

SOL WELDING/OTAI
Futura 2005
Futura 2505

for welding wire:

Steel or stainless steel Ø 0.8 / 1 mm
Steel or stainless steel Ø 0.6 / 0.8 mm

Combinations	Price	quantity
0.6 / 0.8 mm	€51.40
0.8 / 1 mm	€48.19
1 - 1.2 mm	€53.47

In stock

Sacit

Reference: F11373

Magnetic 400 rotating earth clamp

(5 reviews)

€38.83

31,83 € tax excl.

Fast delivery

2-year warranty

Rotating magnetic earth clamp 400 Amperes
Duty cycle 300 A @ 60% and 400 A @ 35%
Ideal for welding parts with a large flat surface
Maximum cable cross-section: 16-25 / 35-50 mm²

Supplier stock

Jelt

Reference: Jelt-58

Jelt cold galvanizing

(18 reviews)

€12.46

10,21 € tax excl.

Fast delivery

2-year warranty

3 products are available for 3 different results after application:

Galva Flash

The durable protection, extreme brilliance.
Protective coating for galvanized steel. Identical appearance to molten zinc straight from a hot-dip galvanizing bath.
Mirror finish for touching up new galvanized parts and welds.
Excellent corrosion resistance (3000 hours salt spray testing). Smooth and flexible film offering good abrasion resistance

Matt Galva

The anti-corrosion shield.
Durable cold galvanizing coating, matt finish. Very high zinc content (99%).
Dual protection: physical and cathodic for touching up and protecting welds.
Excellent corrosion resistance (2500 hours salt spray testing).
Very good adhesion on bare steel or existing paint. Can be overcoated with many varnishes or paints.
Resists without deterioration up to 350°. Good covering power and fast drying.

Gloss Galva

The brilliant protection.
Cold galvanizing coating with gloss finish.
Product designed for touch-ups and protection of welds.
Fine spray providing a magnificent metallic appearance. Dual chemical and mechanical protection.
Very good corrosion resistance (200 hours salt spray testing).
Resists without deterioration up to 350°.
Fast drying, handleable after 15 minutes.

Combinations	Price	quantity
Flash galva	€12.46
Matte galva	€12.46
Bright galva	€12.46

In stock

Telwin

Reference: 802037

Stainless steel kit for welding spool Ø 100 mm Telwin unit

(5 reviews)

€60.79

49,83 € tax excl.

Fast delivery

2-year warranty

This kit allows your Telwin welding unit, whose references are indicated below, to accept welding wire spools of Ø 100 mm.

It contains:

1 spool adapter.
1 stainless steel wire spool Ø 0.8 mm weighing 500 g.
1 drive roller for steel or stainless steel wire Ø 0.6 and 0.8 mm.
10 contact tips for steel wire Ø 0.8 mm
2 gas nozzles Ø 12 mm

This kit fits the following TELWIN units:

Bimax 132-152-162-4.135-4.195

Telmig 150/1- 170/1 - 180/2 -195/2 -200/2 -203/2 -250/ 2 - 251/2 - 281/2

Mastermig 200/2 - Technomig Synergic Dual 150 - 180 -210- 215

Electromig 220 Synergic - Technomig 223 Treo Synergic - Technomig 225.

Steel wire spool diameter Ø 200 mm weight 5 kg

GEKA

Reference: FIL-200

Steel wire spool diameter Ø 200 mm weight 5 kg

(244 reviews)

€25.36

20,79 € tax excl.

Fast delivery

2-year warranty

Steel wire spool Ø 200 mm. Weight 5 kg
Available wire sections: 0.6 - 0.8 - 1
Used for steel construction, machine manufacturing, boats, tanks, pipes, tubes, thin sheet metal, steel furniture, bodywork, frames and reinforcements
The use of this welding wire requires a shielding gas supply (Argon + CO² mixture)
Standard AWS A5.18 ER70S-6
ISO Standard: 14341 -A G 42 3 M G3Si1
Delivered in individual cardboard box.

Combinations	Price	quantity
0.8 mm	€25.36
1 mm	€22.88
1.2 mm	€23.79
0.6 mm	€40.61

GYS - Gasless welding kit for 250 A torch and type A roller

In stock

Gys

Reference: 072336

GYS - Gasless welding kit for 250 A torch and type A roller

(1 review)

€50.79

41,63 € tax excl.

Fast delivery

2-year warranty

This kit is suitable for the GYS MULTIPEARL 210-2 welding machine

It includes:
- 1 plastic ring
- 3 ceramic nozzles "No Gas"
- 1 type A roller with 2 grooves for flux-cored wire Ø 0.9/1.0 & 1.2 mm
- 3 contact tips Ø 0.9/1.0 mm

GYS - gasless welding kit for 250 A torch and type B roller

In stock

Gys

Reference: 072343

GYS - gasless welding kit for 250 A torch and type B roller

€71.11

58,29 € tax excl.

Fast delivery

2-year warranty

This kit is compatible with GYS MULTIPEARL 210-4 and MULTIPEARL 214-4 welders

It includes:
- 1 plastic ring
- 3 ceramic nozzles "No Gas"
- 2 type B rollers with 2 grooves for flux-cored wire Ø 0.9/1.0 & 1.2 mm
- 3 contact tips Ø 0.9/1.0 mm

GYS - gasless welding kit for 150A torch

In stock

Gys

Reference: 041240

GYS - gasless welding kit for 150A torch

(33 reviews)

€28.98

23,75 € tax excl.

Fast delivery

2-year warranty

This kit allows gasless welding on GYS EasyMig and SmartMig welders

It includes:
1 drive roller with a Ø 0.9/1.2 mm groove for Ø 0.9 and 1.2 mm gasless wire
3 contact tips for Ø 0.9 mm flux-cored wire
1 special gas nozzle for flux-cored wire

Compatible with 150A torches only.

Dual-gauge regulator for Argon and Argon +CO² gas

In stock

Le Lorrain

Reference: 094200

Dual-gauge regulator for Argon and Argon +CO² gas

(101 reviews)

€96.59

79,17 € tax excl.

Fast delivery

2-year warranty

This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO²
They comply with and are designed according to standard EN 585/ISO 2503
Both gauges are individually covered with a soft rubber casing to protect them from possible impacts. Gauge dimensions: Ø 50 mm
This regulator has an adjustable flow rate from 0 to 30 liters/minute
Type C connection thread.
French Manufacturing

Supplier stock

DECA

Reference: 010470

MIG torch for DECA STAR 150 or 180 machine

(20 reviews)

€161.65

132,50 € tax excl.

or 3 x 53,88 €

Free delivery

2-year warranty

MIG torch for DECA brand machine suitable for models:
DECASTAR 140 - 150E and 180E.
DECAMIG 4180 E and DECAMIG 4190 E
D-MIG 350 - D-MIG 380 (if torch is fixed to the machine)

Length 2 m

160 A @ 60 %

This reference is a replacement accessory; it is not required when purchasing a new machine.

NEVADA earth clamp in electrogalvanised steel sheet

In stock

Sacit

Reference: NEVADA

NEVADA earth clamp in electrogalvanised steel sheet

(6 reviews)

€13.05

10,70 € tax excl.

Fast delivery

2-year warranty

Electrogalvanised steel sheet earth clamp
Copper-plated brass contacts and copper braid
Cable clamped with copper strip
Copper-plated steel cable clamp

NEVADA 2 For cable cross-section 16 - 25 - 35 mm²
200 A @ 60% and 250 A @ 35%

NEVADA 3 For cable cross-section 50-70 mm²
300 A @ 60% and 400 A @ 35%

Combinations	Price	quantity
NEVADA 2	€13.05
NEVADA 3	€14.24

DECA

Reference: 010841

Kit of 3 rollers for DECA Starflux- Startwin - Decastar and D-Mig welder

(35 reviews)

€12.91

10,58 € tax excl.

Fast delivery

2-year warranty

This kit includes

1 roller for use with steel or stainless steel wire Ø 0.6 - 0.8 and 1 mm
1 roller for use with flux-cored wire Ø 0.8 - 0.9 and 1.2 mm
1 roller for use with aluminium wire Ø 0.8 and 1 mm

Flex-head torch for TIG welding SR 20L water-cooled for LINCOLN welding machine

Supplier stock

BINZEL

Reference: W000278905

Flex-head torch for TIG welding SR 20L water-cooled for LINCOLN welding machine

€202.32

165,83 € tax excl.

or 3 x 67,44 €

Free delivery

2-year warranty

LINCOLN TIG SR20 L brand flex-head torch.

Length 8 M.
Water-cooled

Duty cycle:
DC = 220 A @ 100% - AC = 200 @ 100%

Usable tungsten electrode: diameter 0.5 to 3.2 mm.

5-pin connector Ø 35/50 mm

Light and easy to use, these torches offer ideal manoeuvrability for smooth, flexible welding. The moulded GRIP handle provides optimal grip for achieving the perfect weld. Combined with a TIG welding machine fitted with a water cooler, the SR 20 torch is particularly recommended for everyday welding work.

TIG filler metal - STEEL SG2 Ø1.6 x 1000mm - 1 kg

In stock

Soudexpert

Reference: TIGACD161

TIG filler metal - STEEL SG2 Ø1.6 x 1000mm - 1 kg

(2 reviews)

€8.14

6,67 € tax excl.

Fast delivery

2-year warranty

TIG STEEL SG2 type filler metal rods
Diameter: 1.6 mm
Rod length: 1 metre
1 kg sleeve
1 kg equals +/- 65 rods
Requires the use of welding gas (pure Argon)

Ideal for welding steel in direct current (DC)

Standards: AWS 5.18 - ER70S-6 EN 636-A - W 46 4 W3Si1

Applications:

- Metal construction
- Penetration passes and root passes
- Automotive construction
- Railway
- Pipework
- Marine
- Public works
- Miscellaneous repairs
- Metal construction
- Agricultural equipment

TIG filler metal - STEEL SG2 Ø1.6 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIGACD165

TIG filler metal - STEEL SG2 Ø1.6 x 1000mm - 5 kg

€38.64

31,67 € tax excl.

Fast delivery

2-year warranty

TIG STEEL SG2 filler rods
Diameter: 1.6 mm
Rod length: 1 metre
5 kg sleeve
5 kg is approximately +/- 325 rods
Requires the use of welding gas (pure Argon)

Ideal for welding Steel with direct current (DC)

Standards: AWS 5.18 - ER70S-6 EN 636-A - W 46 4 W3Si1

Applications:

- Metal construction
- Penetration passes and root passes
- Automotive construction
- Railway
- Pipework
- Marine
- Civil engineering
- Miscellaneous repairs
- Metal construction
- Agricultural equipment

TIG Filler Rod - STEEL SG2 Ø2.0 x 1000mm - 1 kg

In stock

Soudexpert

Reference: TIGACD201

TIG Filler Rod - STEEL SG2 Ø2.0 x 1000mm - 1 kg

€8.14

6,67 € tax excl.

Fast delivery

2-year warranty

TIG STEEL SG2 filler rods
Diameter: 2.0 mm
Rod length: 1 metre
1 kg sleeve
1 kg equals +/- 41 rods
Requires the use of welding gas (pure Argon)

Ideal for welding steel with direct current (DC)

Standards: AWS 5.18 - ER70S-6 EN 636-A - W 46 4 W3Si1

Applications:

- Metal construction
- Penetration passes and root passes
- Automotive construction
- Rail
- Pipework
- Naval
- Public works
- Miscellaneous repairs
- Metal construction
- Agricultural equipment

TIG filler rod - STEEL SG2 Ø2.0 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIGACD205

TIG filler rod - STEEL SG2 Ø2.0 x 1000mm - 5 kg

€38.64

31,67 € tax excl.

Fast delivery

2-year warranty

TIG STEEL SG2 filler rods
Diameter: 2.0 mm
Rod length: 1 metre
5 kg sleeve
5 kg is equivalent to +/- 205 rods
Requires the use of welding gas (pure Argon)

Ideal for welding Steel with direct current (DC)

Standards: AWS 5.18 - ER70S-6 EN 636-A - W 46 4 W3Si1

Applications:

- Metal construction
- Penetration passes and root passes
- Automotive construction
- Rail
- Pipework
- Naval
- Public works
- Miscellaneous repairs
- Metal construction
- Agricultural equipment

TIG filler rod - STEEL SG2 Ø2.4 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIGACD245

TIG filler rod - STEEL SG2 Ø2.4 x 1000mm - 5 kg

€34.56

28,33 € tax excl.

Fast delivery

2-year warranty

TIG STEEL SG2 filler rods
Diameter: 2.4 mm
Rod length: 1 metre
5 kg sleeve
5 kg equals +/- 145 rods
Requires the use of welding gas (pure Argon)

Ideal for welding steel in direct current (DC)

Standards: AWS 5.18 - ER70S-6 EN 636-A - W 46 4 W3Si1

Applications:

- Metal construction
- Penetration passes and root passes
- Automotive construction
- Railway
- Piping
- Naval
- Civil works
- Various repairs
- Metal construction
- Agricultural equipment

TIG filler rod - STEEL SG2 Ø2.4 x 1000mm - 950 Grs

In stock

Soudexpert

Reference: TIGACD241

TIG filler rod - STEEL SG2 Ø2.4 x 1000mm - 950 Grs

(2 reviews)

€7.02

5,75 € tax excl.

Fast delivery

2-year warranty

TIG STEEL SG2 filler rods
Diameter: 2.4 mm
Rod length: 1 metre
Sleeve of 1 kg
1kg is equivalent to +/- 29 rods
Requires the use of welding gas (pure Argon)

Ideal for welding steel with direct current (DC)

Standards: AWS 5.18 - ER70S-6 EN 636-A - W 46 4 W3Si1

Applications:

- Metal construction
- Penetration passes and root passes
- Automotive construction
- Railway
- Pipework
- Marine
- Civil engineering
- General repair
- Metal construction
- Agricultural equipment

TIG Filler Rod - STEEL SG2 Ø3.2 x 1000mm - 5 kg

Supplier stock

Soudexpert

Reference: TIGACD325

TIG Filler Rod - STEEL SG2 Ø3.2 x 1000mm - 5 kg

€34.56

28,33 € tax excl.

Fast delivery

2-year warranty

TIG STEEL filler rods type SG2
Diameter: 3.2 mm
Rod length: 1 meter
5 kg sleeve
5kg is equivalent to +/- 80 rods
Requires the use of welding gas (pure Argon)

Ideal for welding Steel with direct current (dc)

Standards: AWS 5.18 - ER70S-6 EN 636-A - W 46 4 W3Si1

Applications:

- Metal construction
- Penetration passes and root passes
- Automotive construction
- Railway
- Pipework
- Naval
- Civil engineering
- Various repairs
- Metal construction
- Agricultural machinery

TIG Steel Filler Rod SG2 Ø3.2 x 1000mm - 950 Grs

In stock

Soudexpert

Reference: TIGACD321

TIG Steel Filler Rod SG2 Ø3.2 x 1000mm - 950 Grs

€6.92

5,67 € tax excl.

Fast delivery

2-year warranty

TIG STEEL filler rods type SG2
Diameter: 3.2 mm
Rod length: 1 metre
1 kg sleeve
1 kg is equivalent to +/- 16 rods
Requires the use of welding gas (pure Argon)

Ideal for welding Steel with direct current (DC)

Standards: AWS 5.18 - ER70S-6 EN 636-A - W 46 4 W3Si1

Applications:

- Metal construction
- Penetration passes and root passes
- Automotive construction
- Railway
- Pipework
- Naval
- Public works
- Various repairs
- Metal construction
- Agricultural equipment

TIG filler metal - ALMG 5 Ø 1.6 x 1000mm - 0.5 kg

In stock

Soudexpert

Reference: TIGALMG51605

TIG filler metal - ALMG 5 Ø 1.6 x 1000mm - 0.5 kg

(2 reviews)

€23.18

19,00 € tax excl.

Fast delivery

2-year warranty

TIG ALU AlMg5 filler rods - ER5356
Diameter: 1.6 mm
Rod length: 1 meter
Pack of 0.5 kg
0.5 kg equals +/- 96 rods
Requires the use of welding gas (pure Argon)

Ideal for welding Aluminum alloys with alternating current (AC)
Standards: AWS A5.10- N.AlMg5- ER5356 - NF A 81.331

Applications:

- Naval industry
- Railway construction
- Aeronautical construction
- Automotive industry
- Furniture manufacturing
- Tipper bodies and trailers
- Various aluminum repairs

TIG Filler Metal - ALMG 5 Ø 1.6 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIGALMG5165

TIG Filler Metal - ALMG 5 Ø 1.6 x 1000mm - 5 kg

€127.09

104,17 € tax excl.

Free delivery

2-year warranty

TIG ALU AlMg5 filler metal rods - ER5356
Diameter: 1.6 mm
Rod length: 1 metre
5 kg sleeve
5 kg equals +/- 960 rods
Requires the use of welding gas (pure Argon)

Ideal for welding Aluminium alloys in alternating current (AC)
Standards: AWS A5.10- N.AlMg5- ER5356 - NF A 81.331

Applications:

- Marine industry
- Railway construction
- Aeronautical construction
- Automotive industry
- Furniture manufacturing
- Tipper and trailer
- Various aluminium repairs

TIG filler metal - ALMG 5 Ø 2.0 x 1000mm - 0.5 kg

In stock

Soudexpert

Reference: TIGALMG52005

TIG filler metal - ALMG 5 Ø 2.0 x 1000mm - 0.5 kg

€21.96

18,00 € tax excl.

Fast delivery

2-year warranty

TIG ALU AlMg5 filler metal rods - ER5356
Diameter: 2.0 mm
Rod length: 1 meter
Sleeve of 0.5 kg
0.5 kg equals +/- 59 rods
Requires use of welding gas (pure Argon)

Ideal for welding aluminium alloys in alternating current (AC)
Standards: AWS A5.10- N.AlMg5- ER5356 - NF A 81.331

Applications:

- Naval industry
- Railway construction
- Aeronautical construction
- Automotive industry
- Furniture manufacturing
- Tipper and trailer
- Various aluminium repairs

TIG Filler Metal - ALMG 5 Ø 2.0 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIGALMG5205

TIG Filler Metal - ALMG 5 Ø 2.0 x 1000mm - 5 kg

€120.99

99,17 € tax excl.

Free delivery

2-year warranty

TIG ALU AlMg5 filler metal rods - ER5356
Diameter: 2.0 mm
Rod length: 1 metre
5 kg sleeve
5kg equals +/- 590 rods
Requires the use of welding gas (pure Argon)

Ideal for welding Aluminium alloys with alternating current (AC)
Standards: AWS A5.10- N.AlMg5- ER5356 - NF A 81.331

Applications:

- Naval industry
- Railway construction
- Aeronautical construction
- Automotive industry
- Furniture manufacturing
- Tipper and trailer
- Various aluminium repairs

TIG Filler Metal - ALMG 5 Ø 2.4 x 1000mm - 0.5 kg

In stock

Soudexpert

Reference: TIGALMG52405

TIG Filler Metal - ALMG 5 Ø 2.4 x 1000mm - 0.5 kg

€19.52

16,00 € tax excl.

Fast delivery

2-year warranty

TIG ALU AlMg5 filler rods - ER5356
Diameter: 2.4 mm
Rod length: 1 metre
0.5 kg sleeve
0.5 kg equals +/- 42 rods
Requires the use of welding gas (pure Argon)

Ideal for welding Aluminium alloys with alternating current (AC)
Standards: AWS A5.10- N.AlMg5- ER5356 - NF A 81.331

Applications:

- Naval industry
- Railway construction
- Aeronautical construction
- Automotive industry
- Furniture manufacturing
- Tipper and trailer
- Various aluminium repairs

TIG Filler Metal - ALMG 5 Ø 2.4 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIGALMG5245

TIG Filler Metal - ALMG 5 Ø 2.4 x 1000mm - 5 kg

€110.81

90,83 € tax excl.

Fast delivery

2-year warranty

TIG ALU AlMg5 filler metal rods - ER5356
Diameter: 2.4 mm
Rod length: 1 meter
5 kg sleeve
5 kg is equivalent to +/- 420 rods
Requires the use of welding gas (pure Argon)

Ideal for welding Aluminum alloys in alternating current (AC)
Standards: AWS A5.10- N.AlMg5- ER5356 - NF A 81.331

Applications:

- Naval industry
- Railway construction
- Aeronautical construction
- Automotive industry
- Furniture manufacturing
- Dump trucks and trailers
- Various aluminum repairs

TIG filler metal - ALMG 5 Ø 3.2 x 1000mm - 0.5 kg

Supplier stock

Soudexpert

Reference: TIGALMG53205

TIG filler metal - ALMG 5 Ø 3.2 x 1000mm - 0.5 kg

€18.30

15,00 € tax excl.

Fast delivery

2-year warranty

TIG ALU AlMg5 filler rods - ER5356
Diameter: 3.2 mm
Rod length: 1 meter
Sleeve of 0.5 kg
0.5 kg equals +/- 23 rods
Requires the use of welding gas (pure Argon)

Ideal for welding aluminum alloys in alternating current (AC)
Standards: AWS A5.10- N.AlMg5- ER5356 - NF A 81.331

Applications:

- Marine industry
- Railway construction
- Aeronautical construction
- Automotive industry
- Furniture manufacturing
- Dump trucks and trailers
- Various aluminum repairs

TIG Filler Metal - ALMG 5 Ø 3.2 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIGALMG5325

TIG Filler Metal - ALMG 5 Ø 3.2 x 1000mm - 5 kg

€110.81

90,83 € tax excl.

Fast delivery

2-year warranty

TIG ALU AlMg5 filler metal rods - ER5356
Diameter: 3.2 mm
Rod length: 1 metre
5 kg sleeve
5 kg is equivalent to +/- 235 rods
Requires the use of welding gas (pure Argon)

Ideal for welding Aluminium alloys in alternating current (AC)
Standards: AWS A5.10- N.AlMg5- ER5356 - NF A 81.331

Applications:

- Naval industry
- Railway construction
- Aeronautical construction
- Automotive industry
- Furniture manufacturing
- Tipper and trailer
- Various aluminium repairs

TIG Filler Metal - INOX 308L Ø1.2 x 1000mm - 1 kg

Supplier stock

Soudexpert

Reference: TIG308L121

TIG Filler Metal - INOX 308L Ø1.2 x 1000mm - 1 kg

(1 review)

€21.24

17,41 € tax excl.

Fast delivery

2-year warranty

TIG INOX 308L filler rods
Diameter: 1.2 mm
Rod length: 1 metre
1 kg sleeve
1 kg equals +/- 113 rods
Requires the use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels of the 304/304L/347/321 type.
Standards: AWS A5.9- ER308L - EN 12072 - W19.9L

Applications:

- Pipework
- Tubes and tanks in petrochemistry

TIG filler metal - Stainless steel 308L Ø1.2 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIG308L125

TIG filler metal - Stainless steel 308L Ø1.2 x 1000mm - 5 kg

€90.49

74,17 € tax excl.

Fast delivery

2-year warranty

TIG stainless steel 308L filler rods
Diameter: 1.2 mm
Rod length: 1 meter
5 kg sleeve
5 kg is equivalent to +/- 565 rods
Requires the use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels type 304/304L/347/321.
Standards: AWS A5.9- ER308L - EN 12072 - W19.9L

Applications:

- Pipework
- Tubes and tanks in petrochemistry

TIG filler rod - STAINLESS STEEL 308L Ø1.6 x 1000mm - 1 kg

In stock

Soudexpert

Reference: TIG308L161

TIG filler rod - STAINLESS STEEL 308L Ø1.6 x 1000mm - 1 kg

(1 review)

€21.24

17,41 € tax excl.

Fast delivery

2-year warranty

TIG filler rods STAINLESS STEEL 308L
Diameter: 1.6 mm
Rod length: 1 metre
1 kg sleeve
1 kg is equivalent to +/- 65 rods
Requires the use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels of the type 304/304L/347/321.
Standards: AWS A5.9- ER308L - EN 12072 - W19.9L

Applications:

- Piping
- Tubes and tanks in petrochemicals

TIG Filler Metal - Stainless Steel 308L Ø1.6 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIG308L165

TIG Filler Metal - Stainless Steel 308L Ø1.6 x 1000mm - 5 kg

€80.31

65,83 € tax excl.

Fast delivery

2-year warranty

TIG STAINLESS STEEL 308L filler rods
Diameter: 1.6 mm
Rod length: 1 meter
5 kg sleeve
5 kg is equivalent to +/- 315 rods
Requires the use of welding gas (pure Argon)

Ideal for direct current (DC) welding of austenitic stainless steels type 304/304L/347/321.
Standards: AWS A5.9- ER308L - EN 12072 - W19.9L

Applications:

- Piping
- Tubes and vessels in petrochemistry

TIG Filler Metal - Stainless Steel 308L Ø2.0 x 1000mm - 1 kg

In stock

Soudexpert

Reference: TIG308L201

TIG Filler Metal - Stainless Steel 308L Ø2.0 x 1000mm - 1 kg

€20.98

17,20 € tax excl.

Fast delivery

2-year warranty

TIG STAINLESS STEEL 308L filler rods
Diameter: 2.0 mm
Rod length: 1 metre
1 kg sleeve
1 kg equals +/- 40 rods
Requires the use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels of the 304/304L/347/321 type.
Standards: AWS A5.9- ER308L - EN 12072 - W19.9L

Applications:

- Pipework
- Tubes and tanks in petrochemistry

TIG filler rod - Stainless steel 308L Ø2.0 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIG308L205

TIG filler rod - Stainless steel 308L Ø2.0 x 1000mm - 5 kg

€80.31

65,83 € tax excl.

Fast delivery

2-year warranty

TIG filler rod STAINLESS STEEL 308L
Diameter: 2.0 mm
Rod length: 1 metre
5 kg sleeve
5 kg is equivalent to +/- 200 rods
Requires the use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels type 304/304L/347/321.
Standards: AWS A5.9- ER308L - EN 12072 - W19.9L

Applications:

- Piping
- Tubes and tanks in petrochemicals

TIG Filler Metal - STAINLESS 308L Ø2.4 x 1000mm - 1 kg

In stock

Soudexpert

Reference: TIG308L241

TIG Filler Metal - STAINLESS 308L Ø2.4 x 1000mm - 1 kg

€21.05

17,25 € tax excl.

Fast delivery

2-year warranty

TIG STAINLESS 308L filler metal rods
Diameter: 2.4 mm
Rod length: 1 metre
1 kg sleeve
1 kg is equivalent to +/- 28 rods
Requires the use of welding gas (pure Argon)

Ideal for direct current (DC) welding of austenitic stainless steels of type 304/304L/347/321.
Standards: AWS A5.9- ER308L - EN 12072 - W19.9L

Applications:

- Piping
- Tubes and vessels in petrochemistry

TIG filler metal - Stainless steel 308L Ø2.4 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIG308L245

TIG filler metal - Stainless steel 308L Ø2.4 x 1000mm - 5 kg

€80.31

65,83 € tax excl.

Fast delivery

2-year warranty

TIG stainless steel 308L filler rods
Diameter: 2.4 mm
Rod length: 1 meter
5 kg sleeve
5 kg is equivalent to +/- 140 rods
Requires the use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels type 304/304L/347/321.
Standards: AWS A5.9- ER308L - EN 12072 - W19.9L

Applications:

- Pipework
- Tubes and tanks in petrochemistry

TIG Filler Rod - Stainless Steel 308L Ø3.2 x 1000mm - 1 kg

In stock

Soudexpert

Reference: TIG308L321

TIG Filler Rod - Stainless Steel 308L Ø3.2 x 1000mm - 1 kg

€20.95

17,17 € tax excl.

Fast delivery

2-year warranty

TIG filler rod STAINLESS STEEL 308L
Diameter: 3.2 mm
Rod length: 1 metre
1 kg sleeve
1 kg is equivalent to +/- 15 rods
Requires the use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels type 304/304L/347/321.
Standards: AWS A5.9- ER308L - EN 12072 - W19.9L

Applications:

- Piping
- Tubes and tanks in petrochemistry

TIG Filler Rod - STAINLESS STEEL 308L Ø3.2 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIG308L325

TIG Filler Rod - STAINLESS STEEL 308L Ø3.2 x 1000mm - 5 kg

€76.25

62,50 € tax excl.

Fast delivery

2-year warranty

TIG STAINLESS STEEL 308L filler rods
Diameter: 3.2 mm
Rod length: 1 metre
5 kg sleeve
5 kg equals +/- 75 rods
Requires use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels type 304/304L/347/321.
Standards: AWS A5.9- ER308L - EN 12072 - W19.9L

Applications:

- Piping
- Tubes and tanks in petrochemistry

TIG filler metal - STAINLESS STEEL 316L Ø1.2 x 1000mm - 1 kg

In stock

Soudexpert

Reference: TIG316L121

TIG filler metal - STAINLESS STEEL 316L Ø1.2 x 1000mm - 1 kg

€29.38

24,08 € tax excl.

Fast delivery

2-year warranty

TIG STAINLESS STEEL 316L filler metal rods
Diameter: 1.2 mm
Rod length: 1 metre
1 kg sleeve
1 kg is equivalent to +/- 113 rods
Requires the use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels type 316L / 316 / 304 / 304L.
Standards: AWS A5.9- ER316L- EN 12072 - W19123L

Applications:

- Suitable for corrosive, acid, chlorine environments
- Food grade
- Petrochemistry
- Handrails

TIG Filler Rod - STAINLESS STEEL 316L Ø1.2 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIG316L125

TIG Filler Rod - STAINLESS STEEL 316L Ø1.2 x 1000mm - 5 kg

€141.31

115,83 € tax excl.

Free delivery

2-year warranty

TIG STAINLESS STEEL 316L filler rods
Diameter: 1.2 mm
Rod length: 1 meter
5 kg sleeve
5 kg is equivalent to +/- 565 rods
Requires the use of welding gas (pure Argon)

Ideal for direct current (DC) welding of austenitic stainless steels type 316L / 316 / 304 / 304L.
Standards: AWS A5.9- ER316L- EN 12072 - W19123L

Applications:

- Suitable for corrosive, acidic, chlorine environments
- Food grade
- Petrochemicals
- Handrails

TIG filler rod - STAINLESS STEEL 316L Ø1.6 x 1000mm - 1 kg

Supplier stock

Soudexpert

Reference: TIG316L161

TIG filler rod - STAINLESS STEEL 316L Ø1.6 x 1000mm - 1 kg

(2 reviews)

€29.38

24,08 € tax excl.

Fast delivery

2-year warranty

TIG filler rod STAINLESS STEEL 316L
Diameter: 1.6 mm
Rod length: 1 metre
1 kg sleeve
1 kg equals +/- 63 rods
Requires the use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels type 316L / 316 / 304 / 304L.
Standards: AWS A5.9- ER316L- EN 12072 - W19123L

Applications:

- Suitable for corrosive, acid, chlorine environments
- Food grade
- Petrochemistry
- Handrails

TIG Filler Metal - Stainless 316L Ø1.6 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIG316L165

TIG Filler Metal - Stainless 316L Ø1.6 x 1000mm - 5 kg

€137.25

112,50 € tax excl.

Free delivery

2-year warranty

TIG INOX 316L filler metal rods
Diameter: 1.6 mm
Rod length: 1 metre
5 kg tube
5 kg is equivalent to +/- 315 rods
Requires the use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels of type 316L / 316 / 304 / 304L.
Standards: AWS A5.9- ER316L- EN 12072 - W19123L

Applications:

- Suitable for corrosive, acidic, chlorine environments
- Food grade
- Petrochemistry
- Handrails

TIG filler metal - Stainless Steel 316L Ø2.0 x 1000mm - 1 kg

In stock

Soudexpert

Reference: TIG316L201

TIG filler metal - Stainless Steel 316L Ø2.0 x 1000mm - 1 kg

€28.98

23,75 € tax excl.

Fast delivery

2-year warranty

TIG STAINLESS STEEL 316L filler rods
Diameter: 2.0 mm
Rod length: 1 meter
1 kg sleeve
1 kg equals approx. 40 rods
Requires the use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels type 316L / 316 / 304 / 304L.
Standards: AWS A5.9- ER316L- EN 12072 - W19123L

Applications:

- Suitable for corrosive, acidic, chlorine environments
- Food grade
- Petrochemical
- Handrails

TIG Filler Metal - Stainless Steel 316L Ø2.0 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIG316L205

TIG Filler Metal - Stainless Steel 316L Ø2.0 x 1000mm - 5 kg

€137.25

112,50 € tax excl.

Free delivery

2-year warranty

TIG STAINLESS STEEL 316L filler rods
Diameter: 2.0 mm
Rod length: 1 metre
5 kg sleeve
5 kg equals approximately 200 rods
Requires the use of welding gas (pure Argon)

Ideal for direct current (DC) welding of 316L / 316 / 304 / 304L type austenitic stainless steels.
Standards: AWS A5.9- ER316L- EN 12072 - W19123L

Applications:

- Suitable for corrosive, acid, chlorine environments
- Food grade
- Petrochemistry
- Handrails

TIG Filler Metal - STAINLESS 316L Ø2.4 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIG316L245

TIG Filler Metal - STAINLESS 316L Ø2.4 x 1000mm - 5 kg

€137.25

112,50 € tax excl.

Free delivery

2-year warranty

TIG STAINLESS 316L filler metal rods
Diameter: 2.4 mm
Rod length: 1 metre
5 kg sleeve
5 kg equals +/- 140 rods
Requires the use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels type 316L / 316 / 304 / 304L.
Standards: AWS A5.9- ER316L- EN 12072 - W19123L

Applications:

- Suitable for corrosive, acid, chlorine environments
- Food grade
- Petrochemistry
- Handrails

TIG Filler Metal - Stainless 316L Ø2.4 x 1000mm - 950 Grs

Supplier stock

Soudexpert

Reference: TIG316L241

TIG Filler Metal - Stainless 316L Ø2.4 x 1000mm - 950 Grs

(1 review)

€25.32

20,75 € tax excl.

Fast delivery

2-year warranty

TIG INOX 316L filler rods
Diameter: 2.4 mm
Rod length: 1 metre
1 kg sleeve
1 kg equals +/- 28 rods
Requires the use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels of the 316L / 316 / 304 / 304L type.
Standards: AWS A5.9- ER316L- EN 12072 - W19123L

Applications:

- Suitable for corrosive, acidic, chlorine environments
- Food grade
- Petrochemistry
- Handrails

TIG filler metal - STAINLESS STEEL 316L Ø3.2 x 1000mm - 5 kg

In stock

Soudexpert

Reference: TIG316L325

TIG filler metal - STAINLESS STEEL 316L Ø3.2 x 1000mm - 5 kg

€137.25

112,50 € tax excl.

Free delivery

2-year warranty

TIG STAINLESS STEEL 316L filler rods
Diameter: 3.2 mm
Rod length: 1 metre
5 kg sleeve
5 kg equals +/- 75 rods
Requires the use of welding gas (pure Argon)

Ideal for DC welding of austenitic stainless steels of type 316L / 316 / 304 / 304L.
Standards: AWS A5.9- ER316L- EN 12072 - W19123L

Applications:

- Suitable for corrosive, acidic, chlorine environments
- Food grade
- Petrochemicals
- Handrails

TIG Filler Metal - INOX 316L Ø3.2 x 1000mm - 950 g

In stock

Soudexpert

Reference: TIG316L321

TIG Filler Metal - INOX 316L Ø3.2 x 1000mm - 950 g

€25.32

20,75 € tax excl.

Fast delivery

2-year warranty

TIG INOX 316L filler metal rods
Diameter: 3.2 mm
Rod length: 1 meter
1 kg sleeve
1 kg equals +/- 15 rods
Requires the use of welding gas (pure Argon)

Ideal for direct current (DC) welding of austenitic stainless steels of type 316L / 316 / 304 / 304L.
Standards: AWS A5.9- ER316L- EN 12072 - W19123L

Applications:

- Suitable for corrosive, acid, chlorine environments
- Food industry
- Petrochemistry
- Handrails

Tungsten Cerium 2% Electrodes (Grey) - Ø1.0x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-10G

Tungsten Cerium 2% Electrodes (Grey) - Ø1.0x150 mm (x10)

€19.31

15,83 € tax excl.

Fast delivery

2-year warranty

Box of 10 Grey WCE20 CERIUM - 2% electrodes
Electrode diameter: Ø 1.0 mm
Very good performance in DC welding
Suitable for thin sheets and tubes
Ideal for welding steel, stainless steel, nickel and titanium alloys

Use at high amperages is not recommended as Cerium oxides will escape, thus cancelling their benefits.

Tungsten Cerium 2% (Grey) Electrodes - Ø1.6x150 mm (x10)

Save 50%

In stock

Soudexpert

Reference: ET-150-16G

Tungsten Cerium 2% (Grey) Electrodes - Ø1.6x150 mm (x10)

(4 reviews)

€9.41

€18.81

7,71 € tax excl.

Fast delivery

2-year warranty

Box of 10 Grey WCE20 CERIUM - 2% electrodes
Electrode diameter: Ø 1.6 mm
Very good performance in DC welding
Suitable for thin sheets and tubes
Ideal for welding steel, stainless steel, nickel and titanium alloys

Use at high amperages is not recommended as the Cerium oxides will escape, thus cancelling their benefit.

Tungsten Cerium 2% Electrodes (Grey) - Ø2.0x150 mm (x10)

Save 50%

In stock

Soudexpert

Reference: ET-150-20G

Tungsten Cerium 2% Electrodes (Grey) - Ø2.0x150 mm (x10)

(2 reviews)

€14.23

€28.46

11,67 € tax excl.

Fast delivery

2-year warranty

Box of 10 Grey WCE20 CERIUM - 2% electrodes
Electrode diameter: Ø 2.0 mm
Very good performance in DC welding
For use on thin sheets and tubes
Ideal for welding steel, stainless steel, nickel and titanium alloys

The use at high amperages is not recommended as Cerium oxides will escape, cancelling their benefits.

Tungsten Cerium 2% Electrodes (Grey) - Ø2.4x150 mm (x10)

Save 50%

In stock

Soudexpert

Reference: ET-150-24G

Tungsten Cerium 2% Electrodes (Grey) - Ø2.4x150 mm (x10)

(1 review)

€17.79

€35.59

14,59 € tax excl.

Fast delivery

2-year warranty

Box of 10 grey WCE20 CERIUM - 2% tungsten electrodes
Electrode diameter: Ø 2.4 mm
Excellent performance in DC welding
Suitable for thin sheet metal and tubes
Ideal for welding steel, stainless steel, nickel and titanium alloys

Use at high amperages is not recommended as the Cerium oxides will dissipate, negating their benefit.

Tungsten Cerium 2% (Grey) Electrodes - Ø3.2x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-32G

Tungsten Cerium 2% (Grey) Electrodes - Ø3.2x150 mm (x10)

€57.95

47,50 € tax excl.

Fast delivery

2-year warranty

Box of 10 Grey WCE20 CERIUM - 2% electrodes
Electrode diameter: Ø 3.2 mm
Very good performance in DC welding
Suitable for thin sheets and tubes
Ideal for welding steel, stainless steel, nickel and titanium alloys

Use at high amperage is not recommended as the Cerium oxides will escape, cancelling their benefits.

Lanthanum Tungsten Electrodes 1.5% (Gold) - Ø1.0x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-10O

Lanthanum Tungsten Electrodes 1.5% (Gold) - Ø1.0x150 mm (x10)

€16.26

13,33 € tax excl.

Fast delivery

2-year warranty

Box of 10 Yellow Tungsten Electrodes WLA15 LANTHANUM - 1.5%
Electrode diameter: Ø 1.0 mm
Suitable for AC and DC currents

Ideal for welding steel, stainless steel, titanium, nickel and copper alloys

Lanthanum Tungsten Electrodes 1.5% (Gold) - Ø1.6x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-16O

Lanthanum Tungsten Electrodes 1.5% (Gold) - Ø1.6x150 mm (x10)

€17.79

14,58 € tax excl.

Fast delivery

2-year warranty

Box of 10 Yellow WLA15 LANTHANUM Tungsten Electrodes - 1.5%
Electrode diameter: Ø 1.6 mm
Suitable for AC and DC currents

Ideal for welding steel, stainless steel, titanium, nickel and copper alloys

Tungsten Lanthanum Electrodes 1.5% (Gold) - Ø2.0x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-20O

Tungsten Lanthanum Electrodes 1.5% (Gold) - Ø2.0x150 mm (x10)

(1 review)

€26.23

21,50 € tax excl.

Fast delivery

2-year warranty

Box of 10 Yellow Tungsten Electrodes WLA15 LANTHANUM - 1.5%
Electrode diameter: Ø 2.0 mm
Suitable for AC and DC currents

Ideal for welding steel, stainless steel, titanium, nickel and copper alloys

Tungsten Lanthanum 1.5% (Gold) Electrodes - Ø2.4x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-24O

Tungsten Lanthanum 1.5% (Gold) Electrodes - Ø2.4x150 mm (x10)

€39.60

32,46 € tax excl.

Fast delivery

2-year warranty

Box of 10 Yellow Tungsten Lanthanum WLA15 electrodes - 1.5%
Electrode diameter: Ø 2.4 mm
Suitable for AC and DC currents

Ideal for welding steel, stainless steel, titanium, nickel and copper alloys

Tungsten Lanthanum 1.5% Electrodes (Gold) - Ø3.2x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-32O

Tungsten Lanthanum 1.5% Electrodes (Gold) - Ø3.2x150 mm (x10)

€58.96

48,33 € tax excl.

Fast delivery

2-year warranty

Box of 10 Yellow Tungsten Electrodes WLA15 LANTHANUM - 1.5%
Electrode diameter: Ø 3.2 mm
Suitable for AC and DC currents

Ideal for welding steel, stainless steel, titanium, nickel and copper alloys

Tungsten Lanthanum 2% (Blue) Electrodes - Ø1.0x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-10B

Tungsten Lanthanum 2% (Blue) Electrodes - Ø1.0x150 mm (x10)

(1 review)

€19.31

15,83 € tax excl.

Fast delivery

2-year warranty

Box of 10 blue WL20 - 2% LANTHANUM electrodes
Electrode diameter: Ø 1.0 mm
For welding steels, stainless steel and aluminum
For use with alternating and direct current (AC DC)

Operating range from 45 to 110 Amperes
Max operating power: DC 110 Amperes and AC 100 Amperes

Classification: AWS A 5.3 - E 4043 DIN 1732 - EL-AlSi5

Tungsten Lanthanum 2% Electrodes (Blue) - Ø1.6x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-16B

Tungsten Lanthanum 2% Electrodes (Blue) - Ø1.6x150 mm (x10)

(2 reviews)

€19.31

15,83 € tax excl.

Fast delivery

2-year warranty

Box of 10 blue WL20 electrodes - LANTHANUM 2%
Electrode diameter: Ø 1.6 mm
For welding steels, stainless steel and aluminium
For use in alternating and direct current (AC DC)

Operating range from 45 to 110 Amperes
Maximum operating power: DC 110 Amperes and AC 100 Amperes

Classification: AWS A 5.3 - E 4043 DIN 1732 - EL-AlSi5

Tungsten Lanthanum 2% (Blue) Electrodes - Ø2.0x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-20B

Tungsten Lanthanum 2% (Blue) Electrodes - Ø2.0x150 mm (x10)

(1 review)

€14.24

11,67 € tax excl.

Fast delivery

2-year warranty

Box of 10 blue WL20 electrodes - LANTHANUM 2%
Electrode diameter: Ø 2.0 mm
For welding steel, stainless steel and aluminum
Use with alternating and direct current (AC DC)

Operating range from 45 to 110 Amperes
Maximum operating power: DC 110 Amperes and AC 100 Amperes

Classification: AWS A 5.3 - E 4043 DIN 1732 - EL-AlSi5

Tungsten Lanthanum 2% Electrodes (Blue) - Ø2.4x150 mm (x10)

Save 50%

In stock

Soudexpert

Reference: ET-150-24B

Tungsten Lanthanum 2% Electrodes (Blue) - Ø2.4x150 mm (x10)

(1 review)

€19.83

€39.65

16,25 € tax excl.

Fast delivery

2-year warranty

Box of 10 blue WL20 electrodes - LANTHANUM 2%
Electrode diameter: Ø 2.4 mm
For welding steels, stainless steel and aluminum
Use in alternating and direct current (AC DC)

Operating range from 45 to 110 Amperes
Max operating power: DC 110 Amperes and AC 100 Amperes

Classification: AWS A 5.3 - E 4043 DIN 1732 - EL-AlSi5

Tungsten Lanthanum 2% Electrodes (Blue) - Ø3.2x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-32B

Tungsten Lanthanum 2% Electrodes (Blue) - Ø3.2x150 mm (x10)

€64.05

52,50 € tax excl.

Fast delivery

2-year warranty

Box of 10 blue WL20 - LANTHANUM 2% tungsten electrodes
Electrode diameter: Ø 3.2 mm
For welding steel, stainless steel and aluminium
For use with alternating and direct current (AC DC)

Operating range from 45 to 110 Amperes
Maximum operating power: DC 110 Amperes and AC 100 Amperes

Classification: AWS A 5.3 - E 4043 DIN 1732 - EL-AlSi5

Pure Tungsten (Green) Electrodes - Ø1.0x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-10V

Pure Tungsten (Green) Electrodes - Ø1.0x150 mm (x10)

€17.29

14,17 € tax excl.

Fast delivery

2-year warranty

Box of 10 Pure Tungsten Green WP electrodes - PUR
Electrode diameter: Ø 1.0 mm
For aluminium welding with alternating current
No sharpening required

Operating range from 5 to 50 Amperes
Maximum operating power: 50 Amperes

Pure Tungsten Electrodes (Green) - Ø1.6x150 mm (x10)

Save 50%

In stock

Soudexpert

Reference: ET-150-16V

Pure Tungsten Electrodes (Green) - Ø1.6x150 mm (x10)

€9.15

€18.30

7,50 € tax excl.

Fast delivery

2-year warranty

Box of 10 Pure Green Tungsten Electrodes WP - PUR
Electrode diameter: Ø 1.6 mm
For aluminium welding with alternating current
No grinding required

Operating range from 40 to 80 Amperes
Maximum operating power: 80 Amperes

Pure Tungsten Electrodes (Green) - Ø2.0x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-20V

Pure Tungsten Electrodes (Green) - Ø2.0x150 mm (x10)

€26.44

21,67 € tax excl.

Fast delivery

2-year warranty

Box of 10 Pure Green Tungsten Electrodes WP - PUR
Electrode diameter: Ø 2.0 mm
For welding aluminium with alternating current
No sharpening required

Operating range from 60 to 110 Amperes
Maximum operating power: 110 Amperes

Pure Tungsten Electrodes (Green) - Ø2.4x150 mm (x10)

Save 50%

In stock

Soudexpert

Reference: ET-150-24V

Pure Tungsten Electrodes (Green) - Ø2.4x150 mm (x10)

(1 review)

€15.76

€31.51

12,92 € tax excl.

Fast delivery

2-year warranty

Box of 10 Pure Green Tungsten Electrodes WP - PUR
Electrode diameter: Ø 2.4 mm
For aluminium welding in alternating current
No sharpening required

Operating range from 70 to 130 Amperes
Maximum operating power: 130 Amperes

Pure Tungsten Electrodes (Green) - Ø3.2x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-32V

Pure Tungsten Electrodes (Green) - Ø3.2x150 mm (x10)

€54.90

45,00 € tax excl.

Fast delivery

2-year warranty

Box of 10 Pure Tungsten Green WP - PURE electrodes
Electrode diameter: Ø 3.2 mm
For welding aluminium with alternating current
No sharpening required

Operating range from 105 to 220 Amperes
Maximum operating power: 190 Amperes

Tungsten Thorium 2% Electrodes (Red) - Ø1.6x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-16R

Tungsten Thorium 2% Electrodes (Red) - Ø1.6x150 mm (x10)

€19.31

15,83 € tax excl.

Fast delivery

2-year warranty

Box of 10 Red Tungsten WT20 Electrodes - THORIATED 2%
Electrode diameter: Ø 1.6 mm
For welding steel and stainless steel
Exceptional performance in TIG DC welding
Ideal for precision work

Operating range from 50 to 120 Amperes
Max operating power: DC 160 Amperes

Caution, there is a slight risk of radioactivity due to thorium. Therefore, we recommend handling grinding dust with a grinder equipped with a particle filter.
Finally, remember to resharpen when the tip becomes blunt.

Tungsten Thorium 2% Electrodes (Red) - Ø1.0x150 mm (x10)

Save 50%

In stock

Soudexpert

Reference: ET-150-10R

Tungsten Thorium 2% Electrodes (Red) - Ø1.0x150 mm (x10)

€9.41

€18.81

7,71 € tax excl.

Fast delivery

2-year warranty

Box of 10 Red Tungsten WT20 Electrodes - THORIATED 2%
Electrode diameter: Ø 1.0 mm
For welding steels and stainless steel
Exceptional performance in TIG DC welding
Ideal for precision work

Operating range from 5 to 30 Amperes
Max operating power: DC 50 Amperes

Caution, there is a slight radioactivity risk due to thorium. Therefore we recommend treating grinding dust with a grinder fitted with a particulate filter.
Finally, remember to resharpen when the tip becomes blunt.

Tungsten Thorium 2% (Red) Electrodes - Ø2.0x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-20R

Tungsten Thorium 2% (Red) Electrodes - Ø2.0x150 mm (x10)

€14.24

11,67 € tax excl.

Fast delivery

2-year warranty

Box of 10 Red Tungsten WT20 - THORIATED 2% electrodes
Electrode diameter: Ø 2.0 mm
For welding steel and stainless steel
Exceptional performance in TIG DC welding
Ideal for precision work

Usage range from 65 to 220 Amperes
Maximum operating power: DC 220 Amperes

Warning, there is a slight risk of radioactivity due to thorium. Therefore, we recommend treating grinding dust with a grinder equipped with a particle filter.
Finally, remember to resharpen when the tip becomes dull.

Tungsten Thorium 2% Electrodes (Red) - Ø2.4x150 mm (x10)

In stock

Soudexpert

Reference: ET-150-24R

Tungsten Thorium 2% Electrodes (Red) - Ø2.4x150 mm (x10)

€34.56

28,33 € tax excl.

Fast delivery

2-year warranty

Box of 10 Red Tungsten WT20 electrodes - THORIATED 2%
Electrode diameter: Ø 2.4 mm
For welding steel and stainless steel
Exceptional performance in DC TIG welding
Ideal for precision work

Operating range from 85 to 270 Amperes
Maximum operating power: DC 270 Amperes

Warning, there is a slight risk of radioactivity due to thorium. Therefore we recommend treating grinding dust with a grinder equipped with a particle filter.
Finally, remember to re-sharpen when the tip becomes blunt.

Tungsten Thorium 2% (Red) Electrodes - Ø3.2x150 mm (x10)

Save 50%

In stock

Soudexpert

Reference: ET-150-32R

Tungsten Thorium 2% (Red) Electrodes - Ø3.2x150 mm (x10)

€27.96

€55.91

22,92 € tax excl.

Fast delivery

2-year warranty

Box of 10 Red WT20 - THORIATED 2% Tungsten electrodes
Electrode diameter: Ø 3.2 mm
For welding steels and stainless steel
Exceptional performance in DC TIG welding
Ideal for precision work

Operating range from 105 to 350 Amperes
Max operating power: DC 350 Amperes

Caution, there is a slight risk of radioactivity due to thorium. Therefore, we recommend handling grinding dust with a grinder equipped with a particle filter.
Finally, remember to re-sharpen when the tip becomes dull.

GYS Torch Kit for TIG LIFT welding SR17V 10/25 - 9mm

In stock

Gys

Reference: 087583

GYS Torch Kit for TIG LIFT welding SR17V 10/25 - 9mm

€116.91

95,83 € tax excl.

Fast delivery

2-year warranty

TIG 17 V Torch – Air – 4 m – Connector 10/25 – GYS087583
Length 4 m. Quarter-turn connector 10/25.
Duty cycle at 60%: 140 A DC and 125 A AC.
Usable tungsten electrodes: up to 2.4 mm.

This GYS TIG torch comes with an accessories kit including:
1 nozzle (N7)
1 collet body (Ø2.4)
1 collet (Ø2.4)
1 back cap (long)
1 WR2 AC/DC tungsten electrode (Ø2.4)