Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
This flow meter allows you to measure the actual gas flow rate at the nozzle of your welding machine.
It is a tool that helps you save gas while achieving the correct settings.
Reference: 260090
Flow meter for MIG-MAG semi-automatic welding torch
€20.23
16,58 € tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
This flow meter allows you to measure the actual gas flow rate at the nozzle of your welding machine.
It is a tool that helps you save gas while achieving the correct settings.
Customer reviews
Product reviews
-
Order placed Monday package received Wednesday perfect
-
Accessory ok
-
Ideal for good gas pressure regulation
-
Good
-
Essential to be sure of your gas flow!
-
I haven't used it yet
-
Well RAS
-
Quality product
-
Top
-
good
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
SILICONI
Reference: SUPER CLEANER
€9.66
7,92 € tax excl.
Fast delivery
2-year warranty
SUPER CLEANER is a fast and powerful cleaner for removing: oils, greases, stains, dirt, and sludge. It is suitable for cleaning engines, gears, chains, hard surfaces, chrome parts, plastics, steel, bicycles, aluminium painted parts, chains, and gearboxes. It does not damage rubber, plastic, or carbon frames. Free from petroleum solvents. It contains additives that leave a shiny, protective film on treated surfaces. It does not corrode or scratch treated materials. BIODEGRADABLE.
Thanks to its formula, it can penetrate and dissolve all types of dirt or encrustation.
750 ml spray bottle
It cleans without leaving greasy residues.
Suitable for cleaning: industrial machines, workbenches, engines, chrome frames, chains, chrome parts, external engine parts, nozzles, mechanical movements, plates, iron parts, copper, engine parts, car rims.
SUPER CLEANER reduces the adhesion of dirt on treated surfaces.
✓ Non-flammable
✓ Non-toxic
✓ Ammonia-free
✓ Non-abrasive
INSTRUCTIONS FOR USE
Wet the parts to be cleaned with water, then apply SUPER CLEANER onto them.
Wait a few minutes for the product to act and dissolve the dirt.
Then remove the dirt with a cloth.
Repeat the operation if the dirt is difficult to remove.
It can also be diluted with water to clean delicate surfaces or fabrics.
CHARACTERISTICS
Base: Mixture of detergents and degreasers
Appearance: Transparent amber liquid
Odour: Fragranced
pH: Alkaline
Viscosity: Fluid
Biodegradability: Over 80%
In stock
Weldline
Reference: RESTORINOX-G
(2 reviews)
€24.40
20,00 € tax excl.
Fast delivery
2-year warranty
Final treatment phase to restore the stainless property of steel
Available in 2 and 10 kg pots in gel form
This is the final phase of the entire process, necessary to restore the stainless property of steel.
This removes contamination from the surface of stainless steel after various work phases and thus regenerates the oxide layer that gives stainless steel its properties.
In fact, this work phase recreates the chrome layer damaged by heat, while reducing the spontaneous oxidation time.
Through this process, the oxide layer that protects against external agents is restored.
How to use RESTORINOX?
First, degrease and pickle the area to be treated with the specific products CLEANOX and PICKLINOX. Then apply the product.
Rest times will vary from 20 to 60 minutes.
At the end of the treatment, rinse the product with water. Do not expose the product or the treated surface to sunlight or any atmospheric agent.
In stock
FISCHER-DAREX
Reference: RIVETS-ACIER
(1 review)
€3.71
3,04 € tax excl.
Fast delivery
2-year warranty
Steel/steel rivets with high shear resistance for fastening metal to metal
Delivered with a drill bit
Examples: lock fitting, heavy gates...
2 rivet sizes are available:
Ø 4 x 10 mm (pack of 75 pieces)
Ø 4.8 x 16 mm (pack of 48 pieces)
SILICONI
Reference: ZINCO 98
(2 reviews)
€8.09
6,63 € tax excl.
Fast delivery
2-year warranty
ZINCO 98 is an aerosol with a high zinc content, particularly suitable for welding touch-ups, for restoring or galvanising parts, and for galvanising and protecting nuts and bolts exposed to the weather over a long period.
This product creates a solid, resistant zinc film that protects steel materials from oxidation and can be painted over or left as is. It withstands salt spray for several hours.
The can is fitted with an anti-drip feature to prevent mess during use.
400 ml aerosol
INSTRUCTIONS FOR USE
Concentrated product
Shake the aerosol vigorously for at least 1 minute before use until the ball inside the aerosol is moving.
Never use without shaking the aerosol, otherwise the heavy concentrated zinc powder at the bottom settles inside the nozzle and blocks the valve, rendering the aerosol unusable
SPECIFICATIONS
Base: Pure zinc at 98%
Pigment purity:>98%
Appearance: Dark grey colour
Propellant: Odourless denatured hydrocarbon. Does not contain CFC
Dry film thickness: 30-60 microns
Coverage power: High
Coverage value: approx. 150ml/m2
Drying time: 5-10 minutes (fast drying, does not drip)
Electrical conductivity: High
Abrasion resistance: Very high
Oxidation resistance: Very good corrosion resistance
Temperature resistance: From -50°C to +500°C
In stock
A.T.I
Reference: 16501
€4.06
3,33 € tax excl.
Fast delivery
2-year warranty
Wooden-handled welding brush with 3 rows of steel wire for brushing the weld bead.
Total brush length including handle 290 mm
Handle length 135 mm
Wire length 25 mm
Klingspor
Reference: 358370
(6 reviews)
€9.66
7,92 € tax excl.
Fast delivery
2-year warranty
Welding brush with wooden handle comprising 4 rows of straight stainless steel wires for brushing welds to produce a clean bead by removing slag.
Total brush length including handle 290 mm
Usable length 125 mm
Save 20%
In stock
Sacit
Reference: F11808S
(35 reviews)
€6.80
€8.50
5,58 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 273 Grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
dbp
Reference: MATTRA127
€12.91
10,58 € tax excl.
Fast delivery
2-year warranty
This brush is used for applying stainless steel cleaning products.
Wooden handle, acid-resistant.
Brush width 30 mm
Handle length 30 cm
In stock
FISCHER-DAREX
Reference: CPJ5
(1 review)
€7.83
6,42 € tax excl.
Fast delivery
2-year warranty
Knurled body Ø 0.8 mm
Diameter 2-3-4-5-6 mm
In stock
Telwin
Reference: 804139
(1 review)
€26.94
22,08 € tax excl.
Fast delivery
2-year warranty
Stainless steel weld cleaning liquid for small weld beads
1 L can.
Applied with a suitable brush. Reference 981863
Empire
Reference: E250M
(4 reviews)
€25.32
20,75 € tax excl.
Fast delivery
2-year warranty
TRUE BLUE square, level vial with E-band contrast strip for better visibility, steel blade, laser engraving
Length: 300 mm
In stock
StrongHandTools
Reference: TBH90604
(5 reviews)
€401.59
329,17 € tax excl.
or 4 x 100,40 €
Free delivery
2-year warranty
Worktop dimensions: 900 x 600 mm.
2 possible working heights:
To be placed on your workbench or worktop: leg height 158 mm
Assembly with provided removable legs: working height 860 mm
Worktop thickness: 4 mm
Hole diameter: 16 mm
Weight: 33 kg
Maximum permitted weight: 680 kg
Sold bare
Two kits available (offered as options):
TBKM1-28: Square accessories for welding table
TBKM2-24: Round accessories for welding table
In stock
StrongHandTools
Reference: TBXS2538
(2 reviews)
€9.10
7,46 € tax excl.
Fast delivery
2-year warranty
This stop allows you to hold workpieces in place for welding. Compatible with any welding table with a Ø 16 mm hole
Dimensions:
Diameter 25 mm
Useful stop height: 37 mm
Total height: 52 mm
In stock
FISCHER-DAREX
Reference: 804303
(7 reviews)
€4.88
4,00 € tax excl.
Fast delivery
2-year warranty
Chrome vanadium locking pliers 250 mm bi-material handle
Opening system up to 53 mm and 35 mm depth.
Serrated jaws for secure holding
Ergonomic locking system, clamping force adjustment via knob
Save 10%
In stock
StrongHandTools
Reference: TDQ612075-K1
(6 reviews)
€2,272.25
€2,524.72
1 862,50 € tax excl.
or 4 x 568,06 €
Free delivery
2-year warranty
Table top dimensions 1200 x 750 mm. Height 910mm
The table top nitrided and black oxidized, reversible and resistant to welding spatter, to rust and scratches
Top thickness: 16 mm - Hole spacing 50 x 50 mm
Hole diameter: 16 mm
Maximum permitted weight: 680 kg
Lockable casters + leveling feet for mobile or stationary use
Delivered with accessories.
Optional: Plasma cutting top
The plasma cutting top supports 45 kg, over a450 x 710 mm cutting surface with 14 reversible slats.
The generous width of 45 mm between the cutting blades provides sufficient space for clamping the blank holder.
The blades remain in place when the top is folded.
Cut, clamp and fasten at a single convenient mobile workstation at an ideal and uniform working height.
In stock
FISCHER-DAREX
Reference: D159
€20.13
16,50 € tax excl.
Fast delivery
2-year warranty
Tri-material handle
Aluminum frame
2-position cutting adjustment: 90° / 45°
Quick blade change via knob in the handle
Supplied with one bi-metal blade *** and a blade holder handle
This flow meter allows you to measure the actual gas flow rate at the nozzle of your welding machine.
It is a tool that helps you save gas while achieving the correct settings.