Refine your search
By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View as
In stock
StrongHandTools
Reference: PGA20M
€43.66
35,79 € tax excl.
Fast delivery
2-year warranty
Long-reach multi-purpose clamp PGA20M
This clamp is used to hold and clamp workpieces together during welding, drilling, cutting, glue drying, etc.
Thread: M10 / opening: 100 mm / OAL: 585-740 mm
Adjustable throat depth: 350, 405, 460, or 510 mm
Adjustable upper spindle: non-marking rubber pads, swivel head
Adjustable lower spindle: non-marking rubber pads, fixed head
Weight: 2.2 kg
In stock
StrongHandTools
Reference: PR
€36.55
29,96 € tax excl.
Fast delivery
2-year warranty
Wide-opening locking pliers with articulated tips, suitable for bodywork, assembly, welding and sheet metal work.
| Reference | Length | Opening | Capacity | Weight |
| PR115S | 280 | 100 | 83 | 1 kg |
| PR18S | 450 | 114 | 114 | 1.4 kg |
Measurements expressed in millimetres
| Combinations | Price | |
| €21.25 | ||
| €36.55 | ||
In stock
StrongHandTools
Reference: MLD600
€19.83
16,25 € tax excl.
Fast delivery
2-year warranty
For holding parts from the outside when access from the inside is difficult
Possible angle: 90° -30°/60°
Dimensions: H 165 x W 110 x Thickness 20 mm
Magnetic force: 18 kg
Weight: 800 g
In stock
StrongHandTools
Reference: MGH4510
€15.86
13,00 € tax excl.
Fast delivery
2-year warranty
Magnetic grinder support for Ø 112 and 125 mm grinders.
It also features a designated space for storing the disc removal wrench as well as grinding or cutting discs.
In stock
FISCHER-DAREX
Reference: 804303
€4.88
4,00 € tax excl.
Fast delivery
2-year warranty
Chrome vanadium locking pliers 250 mm bi-material handle
Opening system up to 53 mm and 35 mm depth.
Serrated jaws for secure holding
Ergonomic locking system, clamping force adjustment via knob
In stock
FISCHER-DAREX
Reference: 804300
€9.86
8,08 € tax excl.
Fast delivery
2-year warranty
Locking pliers length 230 mm.
Serrated jaws for a firm grip
4-position rack for adjusting clamping up to 60 mm and 30 mm depth.
Adjustable clamping force via knob.
In stock
FISCHER-DAREX
Reference: 804310
€7.53
6,17 € tax excl.
Fast delivery
2-year warranty
This large-capacity locking plier clamp allows you to grip bulky workpieces and profiles with large ribs.
It is characterized by the particular shape of its jaws, which allows you to clamp profiles, U-channels and other angle irons with high pressure.
Opening system up to 102 mm and 80 mm depth.
Bi-material handle.
Clamping force adjustment via knob
Ergonomic clamping and release system
In stock
Telwin
Reference: 802586
€90.49
74,17 € tax excl.
Fast delivery
2-year warranty
In stock
Telwin
Reference: 802627
€151.48
€216.40
124,17 € tax excl.
or 3 x 50,49 €
Free delivery
2-year warranty
In stock
Telwin
Reference: 802582-804109
€18.25
14,96 € tax excl.
Fast delivery
2-year warranty
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Replacing the contact tip or torch nozzle
In stock
SOUDO METAL
Reference: MI-MPH5
€35.59
29,17 € tax excl.
Fast delivery
2-year warranty
Large magnetic positioner
Possible angles: 45 - 90 and 135 °
Dimensions: A 116 mm / B: 125 mm
Capacity: 9.2 kg
Lateral pull load capacity: 36 kg
Direct lifting capacity: 9.2 kg
In stock
StrongHandTools
Reference: MFT10
€17.79
14,58 € tax excl.
Fast delivery
2-year warranty
The best way to position and tack pieces together
Suitable for different shapes, round, flat or angled metal surfaces.
Features 6 magnets
Supplier stock
StrongHandTools
Reference: MVDF 44
€35.59
29,17 € tax excl.
Fast delivery
2-year warranty
Articulated positioner for holding sheet metal, round, flat or square workpieces during welding operations
Each positioner has 4 magnets
Pack of 4 positioners
In stock
StrongHandTools
Reference: MAV120
€250.05
204,96 € tax excl.
or 3 x 83,35 €
Free delivery
2-year warranty
Adjustable magnetic square from 30 to 275° Fast and efficient for holding round or flat pieces together. Handle to adjust and lock the desired angle
In stock
StrongHandTools
Reference: MS
€22.36
18,33 € tax excl.
Fast delivery
2-year warranty
The quick and easy way to hold parts.
Equipped with a central hole for easier gripping
Several angle options depending on the chosen model:
MS 45: pulling force 30 kg - Dimensions 111x95x19mm - Angles 45 and 90°
MS 60: pulling force 25 kg - Dimensions 111x95x19mm - Angles 60 and 90°
MS346C: pulling force 40 kg - Dimensions 140x111x19mm - Angles 45 - 60 and 90°
| Combinations | Price | |
| €22.36 | ||
| €18.81 | ||
| €19.83 | ||
In stock
StrongHandTools
Reference: MST327
€28.93
23,71 € tax excl.
Fast delivery
2-year warranty
Holds 2 pieces at angles
Practical: positioned on the outside, they leave clear space for tack welding from the inside
Various positioning angles available: 60-90-120°
Dimensions 83 x 95 x 16mm
In stock
StrongHandTools
Reference: MS2
€127.09
104,17 € tax excl.
Free delivery
2-year warranty
The quick and easy way to hold round or flat workpieces
Two on/off switches for independent operation
2 sizes are available:
MS2-80: pulling force 55 kg - Dimensions 152 x 152 x 38 mm.
MS2-90: pulling force 120 kg - Dimensions 197 x 197 x 48 mm
| Combinations | Price | |
| €127.09 | ||
| €201.30 | ||
In stock
StrongHandTools
Reference: MSA
€83.36
68,33 € tax excl.
Fast delivery
2-year warranty
Quick and easy for holding parts
Ideal for holding round and square tubes as well as sheet metal plates
2 sizes are available and 3 models:
MSA46-HD: pulling force 40 kg - Dimensions 111 x 95 x 29 mm - Angles 45 and 90°
MSA48-HD: pulling force 75 kg - Dimensions 152 x 130 x 35 mm - Angles 45 and 90°
MSA53-HD: pulling force 65 kg - Dimensions 152 x 130 x 35 mm - Angles 45 - 60 and 90°
| Combinations | Price | |
| €43.71 | ||
| €83.36 | ||
| €80.31 | ||
In stock
SOUDO METAL
Reference: MI-MPH25
€12.20
10,00 € tax excl.
Fast delivery
2-year warranty
Small magnetic positioner.
Possible angles: 45 - 90 and 135°.
Dimensions: A: 57 mm and B: 62 mm.
Capacity: 2 kg.
In stock
SOUDO METAL
Reference: MI-MPH35
€16.26
13,33 € tax excl.
Fast delivery
2-year warranty
Large magnetic positioner.
Available angles: 45 - 90 and 135°
Dimensions A: 92 mm and B: 93 mm
Capacity: 9.2 kg
The magnetic square and the magnetic positioner hold metal parts in the correct position during welding, without complicated clamping. Indispensable for precise square assemblies, these accessories free the welder's hands. Discover our selection of magnetic squares and positioners.
The magnetic square holds two metal parts at a precise angle (often 45°, 90°, 135°) using its powerful magnets. It replaces a third hand and ensures that the assembly stays square during tacking and welding. The welder's square is a simple but remarkably effective accessory for gaining precision and comfort on all angle assemblies.
Most magnetic squares offer several fixed angles, the most common being 45°, 90° and 135°. Some squares offer adjustable angles to accommodate particular configurations. The choice depends on your assemblies: for the majority of ironwork and structural work, the standard fixed angles are more than sufficient and guarantee quick positioning.
Holding power is the key criterion for a magnetic welding square. It must be sufficient to firmly hold the parts according to their size and weight. For heavy parts, high-capacity squares are chosen; for small parts, more compact models are sufficient. Some squares have an on/off switch that makes positioning and removal easier.
Beyond squares, welding positioners include various holding accessories: adjustable magnetic supports, clamps and stops. Combined with a perforated welding table, they allow parts to be locked in any configuration. These welding positioner tools are the key to precise and repeatable assemblies, limiting distortion caused by heat.
Proper part holding is not only about precision: it also limits distortion. The heat of welding causes metal to move, and poorly held parts shift or twist. A welding square or robust positioner maintains the geometry during welding and cooling, which reduces rework and improves the final quality of the work.
Magnetic squares attract spatter and metal filings, which accumulate on the magnets. Clean them regularly to preserve their holding power and contact precision. Avoid violent impacts that can demagnetise or break cast iron models. Well maintained, a magnetic square retains its effectiveness for a long time.
The magnetic square works best when combined with a perforated welding table and other clamping accessories. Together, they allow parts to be positioned in any configuration and held firmly during tacking. For complex assemblies, multiplying holding points — squares, toggle clamps, stops — guarantees perfect geometry. It is this combination of welding positioner tools that transforms an approximate fit-up into a precise and repeatable assembly.
To equip yourself well, it is often useful to have several magnetic squares of different sizes: small squares for light parts and tight angles, larger and more powerful ones for heavy structures. Models with an on/off switch, which allow the magnet to be activated or deactivated, greatly facilitate positioning and removal, especially on heavy parts. A small assortment of varied welder's squares covers most situations encountered in the workshop.
The magnetic square is one of those low-cost accessories that radically changes the comfort and quality of work. For a few euros, you gain precision, free your hands and reduce distortion. It is often one of the first purchases recommended after the welder itself, so immediate is its benefit. Combined with a welding table, the magnetic square transforms the way parts are assembled, from a simple frame to more complex structures.
For precise and comfortable assemblies, the magnetic square and the magnetic positioner are essential accessories. Choose angles according to your work and a magnet strength suited to the weight of the parts; models with an on/off switch make handling easier. Combine them with a welding table for optimal holding. Browse our selection of magnetic squares and positioners.
It holds two metal parts at a precise angle (often 45°, 90°, 135°) using its magnets, replacing a third hand. It ensures that the assembly stays square during tacking and welding, which improves precision and comfort.
The most common are 45°, 90° and 135°, in fixed angles. Some squares offer adjustable angles for particular configurations. For the majority of ironwork and structural work, the standard fixed angles are sufficient.
According to the size and weight of the parts: the holding power must be sufficient to firmly grip the assembly. For heavy parts, squares with high capacity are chosen; for small parts, compact models suffice. An on/off switch makes handling easier.
Yes: good holding prevents parts from shifting or twisting under the effect of heat. A square or robust positioner maintains the geometry during welding and cooling, which reduces rework and improves the final quality.
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
