Special pliers for MIG/MAG torch
Uses:
- To clean the inside of the nozzle
- Cut excess wire at the torch outlet before the welding operation
- Assists in unscrewing the contact tip or gas nozzle from the torch.
- Suitable for gas nozzles sz Ø 12 to 15 mm.
30,75 € tax excl.
Special pliers for MIG/MAG torch
Uses:
- To clean the inside of the nozzle
- Cut excess wire at the torch outlet before the welding operation
- Assists in unscrewing the contact tip or gas nozzle from the torch.
- Suitable for gas nozzles sz Ø 12 to 15 mm.
Very well meets my needs
Not yet used.
Not yet used
Very good
very good
Compliant
Fast Shipping
Not bad, a little expensive.
Good quality
Good
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
In stock
HELVI
Reference: 33805063
€15.20
12,46 € tax excl.
Fast delivery
2-year warranty
Drive roller for Helvi Mig-Mag welder for steel or stainless steel welding wire Ø 1 and 1.2 mm.
Also compatible with the following Helvi welder models:
Multimaker 192
Panther 152 / 172
Easymig 177 / 188 / 208N / 238
Monomig 166
Fox 180 / 181
Monomig 186 / 196
Diameter: 30.23 mm
Thickness 15.40 mm
Bore 9 mm
DECA
Reference: 010673
€4.58
3,75 € tax excl.
Fast delivery
2-year warranty
Drive roller for DECA MIG-MAG welder compatible with the following DECA welder references:
Decastar 130 AC and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Decastar 150 E and 180 E
D-MIG 350 - 380 - 390
D-MIG 420S
Only the flux-cored wire roller can be fitted on the DECA Starflux 130 - Decastar 130 AC and D-Mig 230AC welders.
These welders operate exclusively with flux-cored wire (gasless).
In stock
A.T.I
Reference: 16501
€4.06
3,33 € tax excl.
Fast delivery
2-year warranty
Wooden-handled welding brush with 3 rows of steel wire for brushing the weld bead.
Total brush length including handle 290 mm
Handle length 135 mm
Wire length 25 mm
In stock
Oxyturbo
Reference: 215310
€26.33
21,58 € tax excl.
Fast delivery
2-year warranty
Flow meter for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O².
The maximum possible setting with this regulator is 6 liters per minute when fully open
M10 thread
Ridged fitting for hose with inner Ø 6.3 to 7.5 mm
We offer two models
Regulators accepting gas hoses with an inner diameter of 6.5 to 7.3 mm
In stock
Lincoln Electric
Reference: ED016354
€175.89
144,17 € tax excl.
or 3 x 58,63 €
Free delivery
2-year warranty
Main Characteristics
Applications
Welding Positions
All positions
Spool weight: 4.5 kg
In stock
Telwin
Reference: 803073
€263.31
215,83 € tax excl.
or 3 x 87,77 €
Free delivery
2-year warranty
This trolley is the ideal way to move your welding machine.
This is a 2-in-1 trolley: welding machine + gas cylinder on the same support.
Welding machine up to 65 cm in height.
Gas cylinder up to 4 m³
Assembled dimensions: 940 x 480 x H 1180 mm
The cylinder and the welding machine are secured to the trolley with straps (included).
Trolley sold without equipment.
The stated price does not include the gas cylinder or the welding machine.
Delivered unassembled.
In stock
DECA
Reference: DECA-2GAL-JOB522-AL
€33.55
27,50 € tax excl.
Fast delivery
2-year warranty
The drive rolls proposed below are compatible with the following DECA multi-process welding machines:
JOB 522 and 523 LAB
for aluminum welding wire
Ø 0.8 / 1 mm
Ø 1 / 1.2 mm
In stock
Trafimet
Reference: MC0017
€8.89
7,29 € tax excl.
Fast delivery
2-year warranty
This nozzle fits onto the end of your MIG torch
Its role is to direct the gas flow towards the weld and the molten wire.
Its small diameter allows work in tight spaces where room is limited.
In stock
SOUDO METAL
Reference: MI-MPH35
€16.26
13,33 € tax excl.
Fast delivery
2-year warranty
Large magnetic positioner.
Available angles: 45 - 90 and 135°
Dimensions A: 92 mm and B: 93 mm
Capacity: 9.2 kg
In stock
Kemppi
Reference: 4307650
€27.80
22,79 € tax excl.
Fast delivery
2-year warranty
Wire guide liner for steel or stainless steel wire Ø 0.6 to 1 mm.
Suitable for KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5
* Torch model fitted on the MINARMIG 170 AND 200 EVO welding machines sold on our website.
Lincoln Electric
Reference: 2GAL-Aluminium
€22.88
18,75 € tax excl.
Fast delivery
2-year warranty
The aluminium wire drive rolls listed below are compatible with the following welding machines:
DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD
LINCOLN
Quickmig 250 and Quickmig 300
SOL-WELDING (OTAI)
Futura 2005 and 0505C
for welding wire:
Aluminium Ø 0.8 / 1 mm
Aluminium Ø 1.2 / 1.6 mm
Supplier stock
DECA
Reference: DECA-GAL-MIGA
€11.90
9,75 € tax excl.
Fast delivery
2-year warranty
The drive rollers listed below are compatible with the following DECA units:
MIGA 215 - MIGA 218 - MIGA 220
for welding wire:
Steel Ø 0.6 / flux-cored wire Ø 0.6 to 1.2* mm
Steel or stainless steel Ø 0.8 / 1** mm
* Flux-cored wire Ø 1.2 mm is possible with the MIGA 220 and MIGA 225XL units
For MIGA 215 and 218 models, flux-cored wire up to Ø 0.9 mm only.
** solid wire Ø1 mm steel or stainless steel is possible from the MIGA 220 unit
In stock
A.T.I
Reference: 16500
€4.01
3,29 € tax excl.
Fast delivery
2-year warranty
Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Total brush length including handle 245 mm
Useful length 135 mm
In stock
DECA
Reference: DECA-2GAL-JOB522
€33.04
27,08 € tax excl.
Fast delivery
2-year warranty
The drive rolls listed below are compatible with the following DECA welding machines:
JOB 522 and 523 LAB
for welding wire:
Steel or stainless steel Ø 0.6 / 0.8 mm
Steel or stainless steel Ø 1 / 1.2 mm
In stock
Oxyturbo
Reference: 245400
€90.49
74,17 € tax excl.
Fast delivery
2-year warranty
This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO².
They comply with and are designed according to standard EN 585/ISO 2503
Pressure gauge size: Ø 70 mm.
This regulator has an adjustable flow rate from 0 to 30 liters / minute
Regulator tested up to 300 Bar
Type C connection thread
Made in Italy
It allows you to adjust the gas flow rate (and therefore save money) more precisely than an adjustment using a dial flowmeter
In stock
Lincoln Electric
Reference: LINCOLN-GALET-POWERTEC-Aluminium
€109.80
90,00 € tax excl.
Fast delivery
2-year warranty
Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For solid aluminum wire
Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:
Special pliers for MIG/MAG torch
Uses:
- To clean the inside of the nozzle
- Cut excess wire at the torch outlet before the welding operation
- Assists in unscrewing the contact tip or gas nozzle from the torch.
- Suitable for gas nozzles sz Ø 12 to 15 mm.
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
