By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View as
Supplier stock
Telwin
Reference: 804976
€150.46
123,33 € tax excl.
or 3 x 50,15 €
Free delivery
2-year warranty
This CNC interface kit is installed between your plasma cutter and a numerically controlled cutting table
This kit is compatible with TELWIN brand plasma cutters whose model names are listed below:
Superior Plasma 70-100-160.
Cable length 10 m
In stock
Gys
Reference: 039988
€334.49
274,17 € tax excl.
or 4 x 83,62 €
Free delivery
2-year warranty
This CNC interface kit is installed between your Plasma cutter and a numerically controlled cutting table
This kit is compatible with Gys brand plasma cutters whose model names are listed below:
Plasma 45-70-85-105-125
In stock
Trafimet
Reference: CV0024
€28.47
€31.63
23,34 € tax excl.
Fast delivery
2-year warranty
Cutting guide carriage for plasma cutter torch
Compatible with TRAFIMET torches;
References:
Ergocut S 25K / S 35K / S 25
Ergocut S45
In stock
Gys
Reference: 038653
€588.65
482,50 € tax excl.
or 4 x 147,16 €
Free delivery
2-year warranty
3-in-1 accessory, essential for making straight plasma cuts, cutting a chamfered edge or making highly precise circular cuts.
- 2 guide carriages with adjustment screws (torch tightening and support rotation lock).
- 1 compass kit ideal for circular cuts between 40 and 82 cm in diameter.
- Magnetic centering guide for fast cuts on all ferrous surfaces.
- Screw-on centering guide for non-metallic materials.
- "Centre punch" centering guide for precise centering without perforating the sheet metal.
- Compatible with MT-70 and MT-125 A plasma torches
- Premium quality.
Supplier stock
Trafimet
Reference: CV0025
€72.83
€80.92
59,70 € tax excl.
Fast delivery
2-year warranty
This compass kit can be used with the DECA 1235 and 1235 K plasma cutter.
Compatible with TRAFIMET torches, references:
-Ergocut S25K / S35K / S25
-Ergocut S45 / S45P
In stock
Lincoln Electric
Reference: W0300699A
€127.09
104,17 € tax excl.
Free delivery
2-year warranty
This compass kit for single-phase plasma torch is designed for use with Lincoln plasma cutters fitted with a manual LC 25-65 and 105 type torch
This kit includes a wheeled trolley serving as a cutting guide.
This compass kit allows you to quickly and precisely cut a circle with a maximum diameter of 82 cm.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.- "Centre punch" centring guide for precise centring without perforating the sheet metal.
In stock
Gys
Reference: 060753
€202.31
165,83 € tax excl.
or 3 x 67,44 €
Free delivery
2-year warranty
This TPT 40 plasma torch is compatible with GYS cutting machines: CUTTER 30 FV - EASYCUT 40 - CUTTER 45CT
Length: 4 m
Ignition voltage: 500V maximum
Maximum rated current: 40 A
Duty cycle at 40°: 40 A@60%
Torch cooling: Air
Recommended pressure/flow rate: 5 bar - 100 l/min
Switch characteristics: (trigger) 0.6A / 125V DC - 0.3A / 250V DC
Supplier stock
Lincoln Electric
Reference: W03X0893-119A
€503.25
412,50 € tax excl.
or 4 x 125,81 €
Free delivery
2-year warranty
3-in-1 accessory, essential for making straight plasma cuts, cutting a chamfered edge or making very precise circular cuts.
- 2 guide carriages with adjustment screws (torch tightening and support rotation locking).
- 1 compass kit ideal for circular cuts between 40 and 82 cm in diameter.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.
- "Centre punch" centring guide for precise centring without perforating the sheet metal.
- Compatible with plasma torches LC65 - LC105
- Premium quality.
In stock
Gys
Reference: 037984
€161.65
132,50 € tax excl.
or 3 x 53,88 €
Free delivery
2-year warranty
The compass kit allows you to quickly and precisely cut circles up to 82 cm in diameter.
- Ideal for making circular cuts between 40 and 82 cm in diameter.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.
- "Centre punch" centring guide for precise centring without perforating the sheet metal.
- Compatible with plasma torches MT-70 and MT-125 A
- Premium quality.
In stock
Gys
Reference: AT-70
€686.25
562,50 € tax excl.
or 4 x 171,56 €
Free delivery
2-year warranty
Automatic plasma torch for plasma cutter at-70
Duty cycle: 50 A@100% - 65 A@60% - 70 A@50%
Switch (trigger) characteristics: 0.5 A / 48 VDC
Applied standard EN60974-7/2013
2 lengths available: 6 and 12 m.
Recommended pressure / flow rate:
6 m torch:
For cutting 20 and below 70 A: 5.0 bar - 185 l/min
12 m torch
For cutting 20 and below 70 A: 5.6 bar - 185 l/min
Before installing the torch, the generator must be switched off.
Supplied without consumables.
Product available on order only
| Combinations | Price | |
| €686.25 | ||
| €884.50 | ||
In stock
Gys
Reference: 040205
€100.65
82,50 € tax excl.
Fast delivery
2-year warranty
This compass kit for single-phase plasma torch is used with plasma cutters equipped with one of the plasma torch models below
MT25K - MT35K - TPT40 - Z
This kit also includes a wheeled trolley serving as a cutting guide.
This compass kit allows you to quickly and precisely cut circles up to 134 cm in diameter.
- Ideal for making circular cuts between 10 and 134 cm in diameter.
- Magnetic centring pin for fast cuts on all ferrous surfaces.
- Screw-in centring pin for non-metallic materials.
- "Centre punch" centring pin for precise centring without perforating the sheet metal.
Supplier stock
Reference: W100000325
€441.24
361,67 € tax excl.
or 4 x 110,31 €
Free delivery
2-year warranty
Lincoln LC 30 4M plasma torch FOR LINCOLN TOMAHAWK 30K MACHINE
In stock
Lincoln Electric
Reference: W88X1456A-LAF1250
€147.41
120,83 € tax excl.
Free delivery
2-year warranty
This filter protects your torch and consumables from small particles carried by air that interfere with its proper operation.
It comes with a filter cartridge (reference W8800117R)
Lincoln reference: W88X1456A
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
