By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View as
DECA
Reference: 010241
€8.09
6,63 € tax excl.
Fast delivery
2-year warranty
Aluminium wire guide liner. Wire Ø 0.6/1 mm for steel wire - stainless steel wire and flux-cored wire (gasless)
Length 3 m
This liner fits DECA welding machines
MIGA 215
D-MIG 230 AC - Starflux 130 AC
D-MIG 235 - 265 - 350 - 380 with fixed torch
Sacit
Reference: F11950
€6.05
4,96 € tax excl.
Fast delivery
2-year warranty
This special cleaning felt removes all small impurities and oils before the wire enters the liner of your torch.
A clean wire ensures better arc stability and prevents inclusions in the weld pool.
It is placed between the spool and the wire feeder.
In stock
Trafimet
Reference: GM07
€29.93
24,53 € tax excl.
Fast delivery
2-year warranty
Trafimet Teflon wire liner with copper terminal for aluminium wire
2 lengths available: 3 metres and 4 metres
2 liner diameters available:
For aluminium wire Ø 0.6 to 0.9 mm reference GM0710 (blue liner) length 3 metres
For aluminium wire Ø 1 and 1.2 mm reference GM0715 length 3 metres (red liner) and GM0716 length 4 metres
| Combinations | Price | |
| €29.93 | ||
| €29.93 | ||
| €34.27 | ||
In stock
Trafimet
Reference: GM0720
€31.51
25,83 € tax excl.
Fast delivery
2-year warranty
Teflon / 20% carbon wire guide liner for aluminium wire Ø 1 - 1.2 mm
Designed for Trafimet Ergoplus 36 and 36 M8 torches
2 lengths available: 3 and 4 m
| Combinations | Price | |
| €31.51 | ||
| €35.38 | ||
In stock
Telwin
Reference: 802663
€91.29
74,83 € tax excl.
Fast delivery
2-year warranty
This kit is used for aluminum welding in MIG-MAG mode with Telwin welding machines: Electromig 300 and Electromig 330 Wave
This welding is performed under pure argon shielding gas.
It includes:
1 wire liner 3 m for wire Ø 1 and 1.2 mm
1 wire feed roller 1 / 1.2 mm
3 contact tips Ø 1 and 1.2 mm.
In stock
Trafimet
Reference: GM05
€6.05
4,96 € tax excl.
Fast delivery
2-year warranty
Steel or stainless steel wire guide liner:
3 liner diameters available:
Inner diameter 1.4 mm and outer Ø of the liner 4.6 mm for wire Ø 0.6 to 0.9 mm.
Inner diameter 2 mm and outer Ø of the liner 4.6 mm for wire Ø 1 and 1.2 mm.
Inner diameter 2.4 mm and outer Ø of the liner 4.7 mm for wire Ø 1.2 and 1.6 mm.
Length 3 m
| Combinations | Price | |
| €6.05 | ||
| €6.05 | ||
| €6.05 | ||
In stock
Telwin
Reference: 802115
€81.23
66,58 € tax excl.
Fast delivery
2-year warranty
This kit is required for aluminium welding.
This welding is performed under pure argon shielding gas.
This kit is used for aluminium MIG-MAG welding with Telwin machines:
Telmig 195/2-200/2-203/2-250/2-251/2-281/2
Tecnomig 180 Euro - Technomig 210 dual synergic
Maxima 200 -230 - 270
It includes:
1 aluminium wire spool 0.8 mm Ø 100 mm weight 450g - 1 support kit for Ø 100 spool - 1 wire liner 3 m - 1 wire feed roller 0.8 / 1 mm - 5 contact tips Ø 0.8 mm and 1 mm.
In stock
Telwin
Reference: 802817
€96.59
79,17 € tax excl.
Fast delivery
2-year warranty
This kit is required for aluminium welding.
This welding is performed under pure argon shielding gas.
This kit is used for aluminium MIG-MAG welding with Telwin machines: Technomig 215 Dual Synergic - Electromig 220 Synergic and 230 Wave
It includes:
1 wire liner guide - 1 wire feed roller 0.8 / 1 mm - 3 contact tips Ø 0.8 mm and 1 mm.
In stock
Trafimet
Reference: 010370 - GM0600
€20.13
16,50 € tax excl.
Fast delivery
2-year warranty
Wire liner for aluminium wire Ø 0.8 mm, 1 mm.
Length 3 m
This liner fits DECA machines: Startwin 135 EVO and 165/1EVO - Startwin 180 E - Decastar 135 EVO - Decastar 150 E and Decastar 180E
In stock
Kemppi
Reference: GAINE-SP
€12.10
9,92 € tax excl.
Fast delivery
2-year warranty
Wire guide liners for steel or stainless steel wire from Ø 0.6 to 1 mm depending on the chosen reference
These liners are designed to be used with the EURO adapter for MINARMIG 170 OR 200 welding machines (reference W008366)
| Combinations | Price | |
| €12.10 | ||
| €12.10 | ||
In stock
Kemppi
Reference: 4307660
€58.16
47,67 € tax excl.
Fast delivery
2-year warranty
Teflon wire liner for aluminium wire Ø 0.6 to 1 mm.
Compatible with KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5
* Torch model fitted on MINARMIG 170 AND 200 EVO welding machines sold on our website.
In stock
Kemppi
Reference: 4307650
€27.80
22,79 € tax excl.
Fast delivery
2-year warranty
Wire guide liner for steel or stainless steel wire Ø 0.6 to 1 mm.
Suitable for KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5
* Torch model fitted on the MINARMIG 170 AND 200 EVO welding machines sold on our website.
In stock
Trafimet
Reference: GM0501
€7.94
6,51 € tax excl.
Fast delivery
2-year warranty
Wire guide liner for steel or stainless steel wire - Length 4 m
3 liners available to choose according to the diameter of the selected welding wire
For wire Ø 0.6 to 0.9 mm: Inner diameter 1.4 mm and outer Ø of the liner 4.6 mm (GM0501)
For wire Ø 1 and 1.2 mm: Inner diameter 2 mm and outer Ø of the liner 4.6 mm (GM0511)
For wire Ø 1.2 and 1.6 mm: Inner diameter 2.4 mm and outer Ø of the liner 4.7 mm (GM0541)
| Combinations | Price | |
| €7.94 | ||
| €7.94 | ||
| €7.94 | ||
In stock
Telwin
Reference: 802037
€60.79
49,83 € tax excl.
Fast delivery
2-year warranty
This kit allows your Telwin welding unit, whose references are indicated below, to accept welding wire spools of Ø 100 mm.
It contains:
This kit fits the following TELWIN units:
Bimax 132-152-162-4.135-4.195
Telmig 150/1- 170/1 - 180/2 -195/2 -200/2 -203/2 -250/ 2 - 251/2 - 281/2
Mastermig 200/2 - Technomig Synergic Dual 150 - 180 -210- 215
Electromig 220 Synergic - Technomig 223 Treo Synergic - Technomig 225.
In stock
Lincoln Electric
Reference: WP10419
€16.68
13,67 € tax excl.
Fast delivery
2-year warranty
Aluminium wire guide liner Ø 0.1 mm, 1.2 mm
2 lengths available for 3 or 4 m torch.
This liner fits 250 A torches used with Lincoln Speedtec 200 and 215 C welding machines
| Combinations | Price | |
| €16.68 | ||
| €18.51 | ||
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
